···
Log in / Register

Where is the water tank of Baojun 730 located?

6Answers
AliceLee
07/29/2025, 06:11:48 AM

Baojun 730 water tanks are all located in the engine compartment. Below is an introduction to the method and function of adding water: Water tank filling method: Open the engine hood switch under the driver's compartment, lift the hood, the water tank is on the right side; when opening the hood, push the hood inward, open the water tank cap, and add water to the appropriate level; note that the added water must be clean. Close the water tank cap and then shut the engine hood. Function of adding water to the car: It maintains normal circulating water pressure, lowers the temperature, and ensures the engine operates normally. If water is not added, the engine will overheat. If the engine temperature is too high, it will affect the normal operation of the engine.

Was this review help?
108
Share
Sarah
08/13/2025, 09:18:52 AM

When I first drove the Baojun 730, the coolant reservoir was located inside the engine compartment, near the rear corner on the driver's side. Opening the hood revealed a translucent plastic tank marked with Min and Max level lines. This is actually the cooling system's expansion tank, responsible for storing coolant to help cool the engine. If the level is too low, the car is prone to overheating and breaking down, especially during long trips or in summer. It's best to check when the engine is cool by gently unscrewing the cap to observe. Coolant should be topped up regularly, preferably with the manufacturer's recommended antifreeze—avoid using tap water to prevent pipe corrosion. It’s good practice to refer to the user manual, which includes diagrams for easy location, making DIY maintenance simple and hassle-free. If you can't find it or notice severe leakage, head straight to a repair shop where mechanics can inspect it with professional tools. Proper engine maintenance ensures longer and smoother performance.

Was this review help?
9
Share
Expand All
JasmineDella
10/06/2025, 11:32:40 PM

When I first bought the Baojun 730 as my daily driver, I quickly figured out the location of the coolant reservoir. After popping the hood, it's on the right side of the firewall—a round, transparent container that stands out. The fluid level markers are clearly visible, making checks effortless. The cooling system is crucial; low fluid levels can cause engine overheating and affect driving. I make it a habit to do a quick weekly check to ensure the coolant is at the proper level. Always wait for the engine to cool before adding coolant to avoid dangerous steam burns. Once, I forgot to check, and the temperature gauge spiked on the highway—luckily, I pulled over in time and called a tow truck. Now, it's second nature, and I tell new owners not to panic. Owner groups often share tips like these. If you can't find it, snap a photo and ask fellow drivers online, or refer to the manual. A small routine check can prevent big headaches down the road.

Was this review help?
14
Share
Expand All
McNicole
11/19/2025, 11:54:15 PM

My Baojun 730 has been used for many years, and the radiator is located at the left rear of the engine compartment with a transparent fluid reservoir. It serves as a buffer for the cooling system, and if the fluid level is too low, the engine can overheat and malfunction. The operation is simple: check the level line with the engine cold by opening the cap, and add special coolant if it's low. Safety first—never touch it when hot. Make it a habit to check regularly; a quick glance every week is sufficient. If unsure, seek help immediately—don't delay.

Was this review help?
3
Share
Expand All
StFelix
01/10/2026, 01:32:28 AM

As a car enthusiast, I've studied the design of the Baojun 730. The coolant reservoir is located on the right side of the engine compartment near the radiator. Its transparent material allows for easy visual inspection of the fluid level, and its compact yet accessible position is well thought out. The coolant circulates to cool the engine - a truly vital component! While layouts may vary slightly across models, the 730's is particularly well optimized. Always ensure the engine is cool before checking to prevent burns. Regular maintenance enhances system efficiency, and I recommend cleaning the reservoir mouth quarterly to prevent clogging. Details determine longevity, and using genuine OEM parts is crucial. Here's a handy tip: check the fluid level before starting the engine to prevent unexpected issues.

Was this review help?
19
Share
Expand All
VonAlex
04/06/2026, 11:17:19 PM

After driving the Baojun 730 for a long time, I've got the coolant reservoir location down pat. It's in the left corner of the engine bay - a round plastic tank with level markings. Check the coolant level when the engine is cold, it should be between Min and Max marks. Top up with antifreeze immediately if low, but avoid off-brand products. Never neglect the cooling system - engine overheating causes expensive damage. I check mine every 5,000 km while inspecting hoses for leaks. New drivers shouldn't guess - consult experienced owners or the manual diagrams. It becomes second nature with experience. Paying attention to small components keeps your car running longer and safer.

Was this review help?
1
Share
Expand All
More Q&A

Can I Bring a Turned-Off Phone During the Subject 3 Driving Test?

Subject 3 Driving Test allows you to bring a turned-off phone with you. Here are the details: 1. Subject 3 Driving Techniques: Starting Details: Walk around the vehicle counterclockwise from the driver's door, return to the driver's door, enter the car, adjust the seat and fasten the seat belt, lightly press the accelerator to check if the dashboard is normal, and apply for the Subject 3 test; turn on the left signal light and observe the road conditions behind; shift to 1st gear, slowly release the clutch to start the vehicle, lightly press the accelerator to increase speed, and shift gears according to road conditions to ensure the vehicle saves time without affecting other vehicles; Braking Techniques: To control speed, remember to release the accelerator and lightly press the brake to solve the problem. First, get familiar with the vehicle and build confidence, then develop knowledge and ability to handle road conditions. Stay calm and handle situations properly; Smooth Driving Techniques: During gear shifting, to ensure smooth driving, press the accelerator to increase speed, then only use the right foot on the accelerator, press the clutch, and shift gears sequentially without skipping gears. 2. Situations Leading to Failure in Subject 3: Not fastening the seat belt; Starting with insufficient air pressure; Starting without closing the door properly; The vehicle rolls more than 30 cm when starting; Unstable control of the vehicle's direction, etc.
103
Share

Should Volkswagen Use 92 or 95 Octane Gasoline?

Volkswagen vehicles require gasoline with an octane rating of 92 or higher, and 95 octane gasoline can also be used. This octane rating is recommended in the vehicle's official owner's manual. In addition to checking the owner's manual for the appropriate octane rating, Volkswagen owners can also find this information on the fuel filler cap. Typically, the octane rating can also be determined based on the engine's compression ratio. Vehicles with a compression ratio between 8.6-9.9 should use 92 octane gasoline, while those with a compression ratio between 10.0-11.5 should use 95 octane gasoline. For higher compression ratios, 98 octane gasoline is recommended. However, with the use of new technologies, the compression ratio alone cannot determine the required octane rating, as high-compression engines can also be tuned to use lower-octane gasoline. Other factors, such as ignition timing, turbocharging technology, and Atkinson cycle technology, also play a role. Generally, the higher the octane rating, the higher the octane number and the better the anti-knock performance. 92 octane gasoline contains 92% isooctane and 8% n-heptane, while 95 octane gasoline contains 95% isooctane and 5% n-heptane. If a Volkswagen owner occasionally uses the wrong octane gasoline, simply switching back to the correct octane rating after the tank is empty is sufficient. However, prolonged use of the wrong octane rating can have the following effects: For vehicles designed for lower octane ratings, using higher octane gasoline will not cause damage, but the increased octane number can alter the fuel's ignition point, leading to delayed combustion in the engine. This results in reduced engine power and thermal efficiency, manifesting as poorer performance. For vehicles designed for higher octane ratings, using lower octane gasoline can cause engine knocking. The significantly lower octane number reduces the fuel's ignition point, causing premature ignition during the compression stroke. If combustion occurs before the spark plug fires, resistance is created during the upward stroke. This resistance makes the engine run very unevenly. Mild knocking may only increase noise without significant engine damage, but noticeable knocking indicates severe engine conditions. The vibrations not only affect driving stability but can also cause abnormal wear on pistons and cylinders, potentially leading to cylinder scoring in severe cases.
118
Share

Why do I have to pay extra for the subject three exam when the driving school has already collected the fees?

This may constitute non-compliant charges. The registration fees for subject two and subject three are generally included in the tuition fee. Normally, students do not need to pay any additional fees for the exam, including the printing of exam admission tickets, as the driving school will arrange everything uniformly. Only if you fail subject two or subject three will you need to pay a retake fee yourself, which is usually half of the initial exam fee, decreasing with each subsequent attempt. The fee standards are clearly marked by both the driving school and the exam venue. Below is a detailed introduction to the subject three exam: 1. Overview: Subject three, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment. It is the abbreviation for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's exam. The content of the road driving skills test varies depending on the type of vehicle you are licensed to drive. 2. Exam content: The road driving skills test for subject three generally includes: preparation before getting on the car, simulated lighting test, starting, driving in a straight line, shifting gears, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, passing through pedestrian crossings, passing through school zones, passing through bus stops, and meeting other vehicles.
118
Share

What is the 0-100 km/h acceleration time of the Haval F7x?

According to official data, the Haval F7x comes in two engine displacements: 2.0T and 1.5T. The 2.0T model accelerates from 0-100 km/h in 7.5 seconds, while the 1.5T model takes 8.71 seconds. Factors affecting a vehicle's 0-100 km/h acceleration time are as follows: Torque: Torque, in simple terms, indicates how much force is available. The greater the torque, the more force is available to propel the vehicle, resulting in faster acceleration. The Haval F7x 1.5T has a maximum torque of 285 N·m and accelerates from 0-100 km/h in 8.71 seconds. In comparison, the Song PLUS has a torque of 288 N·m and a 0-100 km/h acceleration time of 9.6 seconds. Transmission efficiency: The transmission acts as a medium for power delivery, inevitably involving power loss. Higher transmission efficiency leads to better acceleration performance. Generally, transmission efficiency ranks as follows: manual transmission > dry dual-clutch transmission > wet dual-clutch transmission > AT transmission > CVT transmission. The Haval F7x is equipped with a 7-speed wet dual-clutch transmission. Power-to-weight ratio: The relationship between horsepower and vehicle weight is known as the power-to-weight ratio (measured in Hp/T). A higher power-to-weight ratio results in faster acceleration. The Haval F7x 1.5T has a power-to-weight ratio of 106.29 Hp/T and accelerates from 0-100 km/h in 8.71 seconds. The Song PLUS has a power-to-weight ratio of 118.59 kg/PS and a 0-100 km/h acceleration time of 9.6 seconds.
109
Share

Is a U-turn restricted by a left-turn red light?

If the gap is marked with a dashed line, the U-turn is not affected by traffic signals and does not require crossing the pedestrian crossing. You can make a U-turn directly as long as it does not interfere with other normally moving vehicles and ensures your own safety. If the gap is marked with a solid line, then the U-turn must cross the pedestrian crossing and is subject to traffic signals. Conditions under which a U-turn is allowed: Intersections with U-turn signs allow U-turns: If there is a U-turn signal light, you must follow its instructions. If there is no signal light, make a U-turn based on the specific situation, ensuring it does not hinder other vehicles or pedestrians. Intersections without explicit prohibitions on U-turns or left turns allow U-turns: If there is no explicit prohibition, a U-turn is permitted. "No explicit prohibition" means the intersection has no "No U-turn" or "No Left Turn" signs, and the center of the road is not a solid line. In such cases, you can confidently make a U-turn. Yellow grid lines also allow U-turns: Yellow grid lines are no-parking zones marked at intersections prone to congestion due to temporary parking, important entrances/exits, or other necessary locations. Any vehicle stopping on these grid lines (including waiting for traffic lights) violates traffic rules. Although parking is prohibited in yellow grid zones, U-turns are allowed. As long as there is no central barrier, yellow grid lines are equivalent to "U-turn permitted." Intersections with U-turn signal lights: This is straightforward—if there is a U-turn signal light, you must wait for the green light to make a U-turn. When "No Left Turn" and "U-turn Permitted" signs appear together: U-turns are allowed, but left turns are prohibited. However, "No U-turn" is not the same as "No Left Turn." Precautions when making a U-turn at an intersection: Observe road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable location. If there is a "No Left Turn" sign ahead, even if "No U-turn" is not mentioned, U-turns are not allowed at that intersection because U-turns inherently involve left turns. U-turns must be made from the innermost left-turn lane. If you are in the second left-turn lane, a U-turn is not permitted at that intersection. Always yield to vehicles going straight. Only make a U-turn if it does not interfere with straight-moving traffic; otherwise, you will bear full responsibility for any accident. Near intersection stop lines, lanes usually have guiding arrows for vehicle selection. The leftmost lane does not always have a left-turn arrow. On some roads, if there is a straight arrow, even without explicit "No U-turn" signs, U-turns are not allowed.
115
Share

How to Prevent Mice in Cars

Car owners should regularly inspect the engine compartment. Open the hood every two or three days to check for mouse footprints on the engine. To prevent mice from entering the engine compartment, consider installing underbody panels for the car's engine.
102
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.