Where is the OBD interface located in the Foton View Express?

1 Answers
McAdaline
07/24/25 2:45pm
The OBD interface of the Foton View Express is located under the driver's seat. Open it from behind the driver's seat, and you can see the battery. The OBD interface is behind the battery, in the battery box near the front of the vehicle. OBD stands for On-Board Diagnostics in Chinese. The View Express is a van launched by Beiqi Foton. The 2.0L manual classic model has a body length, width, and height of 5020mm, 1690mm, and 1935mm respectively, with a wheelbase of 2590mm and a minimum ground clearance of 165mm. In terms of suspension, the front suspension of the Foton View Express is a double-wishbone torsion bar independent suspension, and the rear suspension is a longitudinal leaf spring non-independent suspension.
Was this review help?
15
3
Share
More Forum Discussions

What is the ECO mode in cars?

ECO refers to the car's economical driving mode function. ECO is an English abbreviation formed by the combination of Ecology (environmental protection), Conservation (energy saving), and Optimization (power). The Eco mode is further divided into active Eco driving mode and non-active Eco driving mode. When the Eco indicator light on the dashboard illuminates, it indicates that the vehicle's economical mode has been activated. Eco mode is categorized into active and non-active types. The difference lies in the fact that the active type has its own dedicated button, allowing the driver to choose whether to activate it. When the driver presses the Eco mode switch, the dashboard indicator light immediately turns on, and the vehicle automatically begins adjusting settings such as throttle opening, transmission shift logic, and air conditioning output power. Non-active Eco mode does not have a dedicated button. When the Eco indicator light on the dashboard illuminates, it serves merely as a reminder function. The Eco system automatically evaluates your driving behavior. If your current driving operation achieves the optimal fuel supply, the dashboard will simultaneously display the Eco indicator light. Most cars adopt the active Eco driving mode, meaning they have their own switch button. Therefore, during daily driving, we can generally activate the Eco mode. However, it is unnecessary to activate Eco mode when the speed exceeds 120 km/h, during idling, in N/P gear, or in manual mode, especially when climbing hills. Doing so would not only fail to demonstrate the fuel-saving characteristics of Eco mode but also affect the vehicle's power performance. Additionally, the Eco mode typically becomes ineffective under the following circumstances: When the vehicle speed exceeds 120 kilometers per hour, the car prioritizes speed, causing the Eco mode to automatically deactivate. During idling or when in N/P gear or manual mode, the Eco mode may also become ineffective. When high torque output is required, such as when climbing a hill, the engine control unit prioritizes ensuring sufficient power to drive the vehicle, and the Eco mode will not operate in such scenarios.
1
0
Share

How many years must a novice driver wait before driving on highways?

The latest traffic regulations stipulate that a new driver's license comes with a 12-month probationary period. During this probationary period, the driver is not permitted to drive alone on highways and must be accompanied by someone with at least three years of driving experience. Novice drivers are also required to affix or display a uniform sign at the rear of the vehicle during the probationary period. If the sign does not comply with regulations or cannot be properly identified, it will be considered as not displaying the sign, resulting in a fine of 200 yuan. Below are precautions for driving on highways: 1. Drive at low speed with high engine RPM, shifting gears only when the engine maintains above 3000 RPM. 2. For automatic transmission vehicles, you can switch to "manual mode" or use low gears for adjustment. 3. Keep the engine RPM between 3000 and 5000.
3
4
Share

Can the Throttle and Clutch Be Pressed Simultaneously?

Throttle and clutch should not be pressed simultaneously, as pressing them together is ineffective—stepping on the clutch is equivalent to shifting into neutral. When starting the vehicle, it is advisable to apply the throttle slightly before the clutch engagement point, with a moderate throttle opening being optimal. Releasing the clutch should be closely coordinated with pressing the throttle, ensuring swift and smooth movements. Below is an extended introduction: 1. The key principle of clutch operation is to follow the "fast-slow-linked" sequence when lifting the clutch pedal. When pressing the clutch pedal, the action should be decisive and fully depressed to ensure complete disengagement of the clutch. 2. The car's clutch is located within the flywheel housing between the engine and the transmission. The clutch assembly is secured to the rear plane of the flywheel with screws, and the output shaft of the clutch serves as the input shaft of the transmission. It is positioned on the far left.
7
0
Share

How to Use the S Gear in the Honda Avancier?

S gear is the sport mode - overdrive gear, suitable for speeding or driving at high speeds. In this mode, the engine speed can rise rapidly and provide sufficient power for the car to accelerate instantly, making it a great assistant for overtaking. Here are some relevant details: 1. The S gear in a car is the sport mode, where 'S' stands for SPORT, commonly referred to as sport mode. Many performance cars are equipped with an S gear. In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, keeping the engine at high speeds for a certain period to output greater torque and thus increase the car's power. 2. In S gear sport mode, the transmission can shift freely, but the shifting timing is delayed, allowing the engine to maintain high speeds for a longer time. This enables the car to drive at low gears with high speeds for an extended period, resulting in greater torque output and acceleration. During driving, the gear lever can be pushed into the 'S' gear, which is typically used for climbing hills and quickly overtaking other vehicles.
7
2
Share

How long does it take to transfer ownership of a new energy vehicle?

Different regions have varying transfer periods. Taking Tianjin as an example, new energy vehicle ownership transfer requires a waiting period of two years. The transfer procedures for new energy vehicles are the same as those for blue-plate vehicles, with similar processing times. It's important to note that new energy vehicle license plates can be transferred, but the vehicle and plate must be transferred together. Separation of the vehicle and plate is only permitted six months after the transfer. Required documents for new energy vehicle ownership transfer include: 1. Vehicle license; 2. Motor vehicle registration certificate; 3. Supplementary motor vehicle registration form (obtained from the local vehicle management office with ID card, vehicle license, and road maintenance fee certificate); 4. Vehicle purchase tax certificate; 5. ID cards and household registration books of both buyer and seller. For non-local residents, a residence permit is required, and the buyer's residence permit must be valid for at least one year.
15
3
Share

What is the general thickness of automotive paint film?

Paint thickness varies depending on the vehicle model, color, and specific area, typically ranging between 120 to 180 microns, with a Mohs hardness of only 0.4-0.6. The thickness slightly differs for the roof, door panels, and front hood. Below is an introduction to automotive paint: 1. Automotive paint refers to the coating applied to vehicles, which is a type of paint. Applying paint to a car not only forms a protective film on the surface, making the body less prone to corrosion and extending the vehicle's lifespan, but also provides an aesthetic appeal. Different automotive paints produce different effects, and choosing different types and colors can showcase the unique personality of the car. Therefore, automotive paint is crucial to the vehicle itself. 2. Automotive paint must not only ensure the paint film has excellent mechanical properties, good fullness, and high gloss but also provide strong adhesion, high hardness, and scratch resistance. Additionally, it must possess outstanding weather resistance, scratch and abrasion resistance, gloss durability, and excellent resistance to gasoline, alcohol, acids, alkalis, and salt spray, among other properties.
19
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.