···
Log in / Register

Where is the Lynk & Co 03 fuse box located?

6Answers
JoyFitz
07/28/2025, 12:21:13 PM

Lynk & Co 03 fuse box is located under the driver's seat. The fuse box is an overcurrent protection switch, mainly used to control the working power of the circuit. Taking the 2021 Lynk & Co 03 as an example, its body dimensions are: length 4639mm, width 1840mm, height 1472mm, with a wheelbase of 2730mm. The Lynk & Co 03 is equipped with a 1.5L turbocharged engine, with a maximum power of 115kW and a maximum torque of 245Nm. The maximum power speed is 5000rpm, and the maximum torque speed ranges from 1450 to 4000rpm. It is paired with a 6-speed manual transmission.

Was this review help?
117
Share
RhettDella
08/11/2025, 04:35:06 PM

I previously did some research on the location of the Lynk & Co 03's fuse boxes. This car has two ingeniously designed fuse boxes—the main one is located in the front right corner of the engine bay, right next to the battery inside a black box, which requires lifting the hood to access. The secondary fuse box is behind a side panel under the steering wheel in the cabin; just sit in the driver's seat and look down to see a small cover on the left side that can be pried open with a fingernail to replace fuses. I remember last time when helping a neighbor check, we found the blown fuse for the passenger-side air conditioning right here. New owners should remember to disconnect the vehicle's power before working on it and it's advisable to keep some spare fuses on hand, purchased according to the amperage indicated in the manual. Some owners prefer replacing the window regulator fuse with an illuminated type for easier operation at night—once you locate these two spots, swapping fuses is actually quite convenient.

Was this review help?
14
Share
Expand All
DeMadelyn
09/29/2025, 02:53:47 AM

Last week, I saw a Lynk & Co 03 having its fuse box disassembled at the repair shop. The secondary fuse box on the driver's side is hidden behind the left cover panel of the steering wheel—just press the top clip to open it. The one in the engine bay is located next to the coolant reservoir, and you'll need a flathead screwdriver to pry open the cover. These two compartments house over 80 fuses for the entire vehicle, including critical systems like ABS and airbags. It's advisable for owners to carry a mini test pen in the car, as it's especially handy for checking fuses. I personally like to label the fuses for the dashcam and cigarette lighter for easy identification. If you encounter frequent fuse blowouts, don't force a replacement yourself—it might indicate a wiring issue, and a professional diagnosis at a 4S shop is recommended. The fuse for the AC system is located in the engine bay fuse box, within the F3-F5 numbered area.

Was this review help?
17
Share
Expand All
Curtis
11/12/2025, 09:01:40 PM

The designer of the Lynk & Co 03 divided the fuse box into two locations: the engine compartment and the cabin. The front fuse box is located near the lower left corner of the windshield, a rectangular black plastic box. To access the driver's side fuse box, you need to look down at the left side of the brake pedal and press the black cover to remove it. During each maintenance, check if the fuse pins are oxidized—my car showed signs of overheating and melting. Using a phone flashlight is very convenient for emergency operations. Note that the headlight fuse is in the engine compartment group, the blue 10-amp type. Avoid operating the fuse box in rainy weather, as the metal contacts can easily rust.

Was this review help?
7
Share
Expand All
StPaisley
01/02/2026, 10:42:13 PM

As a Lynk & Co owner sharing experience: The fuse box on the passenger side is located behind the interior panel above the glove compartment, which requires lying down and looking upward to spot the small access door. The driver's side one is easier to find - there's a removable panel near the knee position left of the steering wheel. Remember to refer to the manual's fuse numbering diagram when replacing fuses. Last time my fog lights weren't working, it turned out to be a blown 15A fuse (F39). The engine compartment fuse box comes with a dedicated clip for easy removal. Some modification enthusiasts color-code frequently replaced fuses. Always disconnect the vehicle's power for at least ten minutes before operation to prevent ECU damage from short circuits. Northern owners should note that plastic covers become brittle in winter.

Was this review help?
7
Share
Expand All
Ronald
03/30/2026, 11:25:16 PM

My Lynk & Co 03 Fuse Box Exploration Experience: The engine bay fuse box is hidden behind the air filter - just lift the silver metal cover to reveal neatly arranged fuse arrays. The cabin fuse box is located beneath the steering column; simply pull down the trapezoidal cover panel. The fuse box lid usually has a helpful fuse distribution diagram printed inside. Once when my dashcam lost power, I found the blown #5 fuse in the passenger side fuse box. It's wise to keep spare fuses of different ratings - a mini toolkit from auto shops fits perfectly in the center console. Always wear insulated gloves during operation, and using needle-nose pliers is much safer than fingers for fuse removal.

Was this review help?
18
Share
Expand All
More Q&A

What are the differences between XPeng P5 and P7?

The main differences between XPeng P5 and P7 lie in their power, appearance, and configurations. Here are the detailed comparisons: Power: The XPeng P5 is a pure electric vehicle with 211 horsepower, a maximum power of 155kW, and a maximum torque of 310 Nm. The XPeng P7 is a pure electric vehicle with 267 horsepower, a maximum power of 196kW, and a maximum torque of 390 Nm. Appearance: The XPeng P5 has a body size of 4808mm x 1840mm x 1520mm with a wheelbase of 2768mm. The XPeng P7 has a body size of 4880mm x 1896mm x 1450mm with a wheelbase of 2998mm. Configurations: The XPeng P7 comes standard with features like lane departure warning, forward collision warning, active braking, remote vehicle movement, leather seats, front seat heating and ventilation, steering auxiliary lights, multi-color interior ambient lighting, exterior rearview mirror tilting when reversing, and a negative ion generator, which are not available in the XPeng P5. The XPeng P5 comes standard with hill descent control and an active grille shutter, which are not available in the XPeng P7.
111
Share

How Often Should the Transmission Fluid Be Changed for a Honda Civic?

Honda Civic is equipped with a continuously variable transmission (CVT), and its transmission fluid is generally recommended to be changed every two years or approximately 60,000 kilometers. Signs indicating the need for a transmission fluid change include body vibration, gear shifting hesitation, a transmission overheating warning on the dashboard, engine stalling, and unusual noises. Hazards of not changing the transmission fluid for a long time: Damage to the transmission's shift control mechanism; abnormal wear of gears and clutch plates inside the transmission; affecting the normal operation of the transmission, leading to damage to the transmission valve body. The methods for changing the transmission fluid are as follows: Loosen the drain screw at the bottom of the transmission to drain the old fluid before refilling. Remove the transmission oil pan directly to drain and refill the fluid: this method is more thorough than the previous one, as it removes impurities from the bottom of the oil pan. Use a circulation machine to change the automatic transmission fluid: dynamic fluid change with an intelligent circulation machine can filter and clean sludge and impurities inside the automatic transmission.
111
Share

What are the differences between the BMW X4 and X6?

The differences between the BMW X4 and X6 are as follows: 1. BMW X4: Length 4683mm, width 1890mm, height 1636mm. BMW X6: Length 4929mm, width 1989mm, height 1709mm. 2. The X6 is equipped with a 2.0T or 3.0T-V6 engine, paired with the same 8AT transmission. The X4 is equipped with a 2.0T engine paired with an 8AT transmission. The BMW X6 and X4 are derived crossover models of the X5 and X3 SUVs, respectively. Their lower body height and fastback tailgate design help reduce the drag coefficient, improving the vehicle's power performance and driving stability. 3. The BMW X6 does not adopt BMW's latest family design, so there are differences in the headlight styling between the two models.
107
Share

Does the Audi A3 have ISOFIX interfaces?

Domestically produced Audi A3 models are equipped with ISOFIX interfaces. ISOFIX interfaces: The main advantage of ISOFIX is that the ISOFIX device can securely connect child car seats to the vehicle. It provides a simpler and safer way to install car seats. Installing a seat using ISOFIX is easier than using a seatbelt. The ISOFIX device effectively reduces the risk of incorrect installation, significantly lowering the chances of improper installation. Introduction to the Audi A3: The Audi A3 features a MacPherson strut front suspension and a rear axle with a torsion and crank-type structure, separately arranged springs and shock absorbers. In addition to excellent handling, the rear suspension layout also offers high space utilization, making the cargo area outstanding among vehicles in its class. All A3 series models come with disc brakes on both front and rear, with front brakes featuring ventilation slots.
116
Share

Why do BMW tires keep blowing out?

BMW tire blowout reasons are as follows: Low tire pressure: When tire pressure is too low, the wheel's sinking amount increases, radial deformation increases, friction between the tread and ground rises, rolling resistance goes up, and the tire body's internal stress also increases. This causes a sharp rise in tire body temperature, softening the tread rubber and accelerating aging speed, leading to partial delamination of the tire body and increased tread wear. Under these conditions, if the car continues to drive at high speeds on highways, these reactions accelerate, significantly increasing the likelihood of a blowout. Overinflated tires: Excessive tire pressure increases the tension of the tire body cords, accelerating the fatigue process. Especially when driving with overinflation, overload, and overspeed, it further increases the internal stress of the cords, rapidly raising tire temperature and speeding up rubber aging, while reducing fatigue strength. This results in severe central tread wear, sawtooth pattern wear on the sidewalls, and cord layer breakage, leading to blowouts. Incorrect tire installation: Wheel imbalance. Due to uneven mass distribution across the wheel parts, when the wheel rotates, centrifugal force creates massive impact forces in the wheel's rotation plane, causing the wheel to bounce and sway. This accelerates tire wear and subjects the cord layers to periodic impact loads, reducing the cord's fatigue resistance. Especially at speeds above 100km/h, wear caused by wheel imbalance becomes extremely severe, ultimately leading to blowouts.
118
Share

Which brand of tires is best for the Tiguan?

Tiguan's top tire choices are the Dunlop Dynapro-HL2RA35 and Michelin Pilot-Primacy. More information on tire selection for the Tiguan is as follows: 1. The Dunlop Dynapro-HL2RA35 utilizes advanced technologies such as noise prediction analysis, visual noise technology, rolling analysis technology, and vibration control technology to effectively reduce noise and enhance driving comfort. 2. The Michelin Pilot-Primacy offers excellent handling, wet traction, and low noise, providing drivers with an ideal combination of high performance and comfort, while increasing stability and directional control during driving.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.