···
Log in / Register

Where is the Haima Air Filter Located?

6Answers
OEvan
07/23/2025, 02:38:27 PM

Haima air filter locations vary by model. Taking the Haima S7 as an example, the air filter is located in the engine compartment. You need to first remove the plastic panel in front of the windshield wipers to access the air filter. The functions of the air filter are as follows: 1. It can effectively filter dust, pollen, abrasive particles, and other solid impurities in the air, ensuring clean air in the cabin without breeding bacteria, thus creating a healthy environment. 2. It can absorb moisture, soot, ozone, odors, carbon oxides, SO2, CO2, and other harmful gases in the air, preventing passengers from inhaling harmful gases and ensuring driving safety.

Was this review help?
109
Share
SimonFitz
08/10/2025, 10:15:54 AM

The location of the air conditioning filter in Haima vehicles is relatively easy to find, usually behind the glove box. When I changed it for the first time, I was a bit nervous, but found the process quite simple: first, empty the contents of the glove box, then open it. You'll see plastic clips or small screws at the bottom or on the sides. Gently pry them open or unscrew them, and the glove box will drop or move aside partially, revealing the filter housing directly. Remove the old filter and insert a new one of the matching model. I recommend replacing it every 10,000 kilometers or six months to prevent dust buildup, which can cause unpleasant odors or allergic reactions from the AC. The design of this location is reasonable, allowing you to save the hassle of visiting a repair shop by doing it yourself. Pay attention to any strange odors in the car and inspect it early to improve driving comfort.

Was this review help?
8
Share
Expand All
LouisDella
09/22/2025, 05:05:33 AM

The Haima car's cabin air filter is commonly located behind the glove box area. After removing the glove box, you can access the filter slot, making replacement relatively easy. From my experience, Haima's design is maintenance-friendly, easier to handle than some vehicles that place it in the engine compartment. Regularly changing the filter, such as every 8 months, helps filter pollen and harmful particles, reducing unpleasant odors in the cabin. When DIY-ing, choose OEM or certified products to ensure proper fit and avoid mistakes. From a health perspective, fresh air makes long-distance driving more comfortable, especially providing peace of mind when children are passengers.

Was this review help?
14
Share
Expand All
DelCamilla
11/05/2025, 10:25:23 PM

The cabin air filter is usually located behind the glove box, and the filter position becomes visible upon removing the compartment. Replacing it is simple and improves air quality. Annual replacement is recommended for optimal pollutant filtration performance.

Was this review help?
15
Share
Expand All
LeSavannah
12/27/2025, 12:12:55 AM

Replacing the Haima air filter yourself can save you some money, as it's conveniently located behind the glove box. Just open the glove box and remove the clips; buying the filter online is both economical and quick. By skipping the labor cost, you save at least a few dozen bucks each time. Remember to match the model number, and the location isn't tricky. This maintenance ensures the air conditioning runs smoothly, keeps the car free of odd smells, and makes driving more pleasant. The well-designed location makes it easy even for beginners to try.

Was this review help?
8
Share
Expand All
MasonMarie
03/24/2026, 04:33:21 AM

The Haima car's cabin air filter is located behind the glove box. Simply open and remove it to access for easy replacement. Regular maintenance with replacement every 10,000 kilometers prevents air conditioning odors, blockages, and ensures clear visibility for safety. The convenient location allows for quick DIY replacement in just minutes, saving both time and money. This ensures proper air circulation for a fresh cabin environment, promoting driver focus and reducing fatigue.

Was this review help?
20
Share
Expand All
More Q&A

Why is there a continuous sound of the car door locking and unlocking?

During driving, the repeated sound of the car door locking is because the car automatically locks when reaching a certain speed, and if the door is not properly closed or there is an issue with the lock, it will repeatedly lock. After automatic locking, there may often be multiple consecutive locking sounds. It could also be due to a loose linkage inside the door lock, preventing the electric lock from engaging properly, which easily results in the door not being securely locked and requires maintenance and inspection. More relevant information is as follows: 1. GEM controls various functions of the central locking: Each of the four doors has a door module, and each door lock motor is controlled by its own door module. The door control units are connected to the body control unit GEM via a medium-speed CAN network line for signal transmission. The GEM controls various central locking functions, such as remote unlocking and automatic locking when the speed exceeds 7 km/h. The front door locks have the function to control the locking and unlocking of all doors. 2. Replacing the door lock assembly: Since the door lock signal switch and the door lock motor are integrated into the door lock assembly, only the entire door lock assembly can be replaced.
115
Share

What Causes the Abnormal Noise from Newly Replaced Tires?

After replacing new tires, if you notice abnormal noises, the following possibilities may exist: 1. During the tire replacement process, it's possible that the bearings were damaged. 2. If you replaced the tires yourself or the maintenance personnel did not perform a proper four-wheel alignment after replacement, it could lead to uneven force distribution among the tires, resulting in "tire cupping." 3. The newly replaced tires have a low aspect ratio or increased width, which will increase noise levels, depending on the owner's preference. Generally, there are several reasons for excessive tire noise: 1. The first possibility is that foreign objects may be stuck in the tire treads, which can be checked and removed. 2. The second reason could be excessively high tire pressure or uneven tire pressure among the tires, which requires confirmation at a repair shop. 3. The third possibility is that after replacing new tires or not having a four-wheel alignment for an extended period, uneven tire wear may occur.
118
Share

What to Do If 6 Points Are Deducted During the Probationary Period of a Driver's License?

C1 driver's license during the probationary period with 6 points deducted will not affect the probationary license. As long as you promptly handle the traffic violation, pay the fine, the points will be cleared at the end of the scoring cycle. Below are the regulations for traffic violation point deductions: 1. Situations resulting in a 6-point deduction: Driving a motor vehicle during the period when the motor vehicle driver's license is revoked; driving a motor vehicle in violation of traffic signals; driving a commercial passenger vehicle (excluding buses), school bus with 20% or more passengers, or other passenger vehicles with 20% or more passengers; driving medium-sized or larger passenger vehicles, school buses, or hazardous goods transport vehicles on highways or urban expressways at speeds exceeding the prescribed limit by 20% or more; driving medium-sized or larger passenger vehicles, school buses, or hazardous goods transport vehicles on roads outside highways or urban expressways, or driving other motor vehicles at speeds exceeding the prescribed limit by 20% but less than 50%. 2. Consequences of accumulating 12 points: If 12 or more points are accumulated within the 12-month probationary period, your driver's license will be revoked, requiring you to reapply for driving school and obtain a new license. Any illegal activities will be dealt with according to relevant legal provisions.
111
Share

Is it necessary to rotate the front and rear tires of a sedan?

It is necessary to rotate the front and rear tires of a car. To achieve optimal tire wear, tire rotation is essential. The reasons for rotation are as follows: 1. Rotating the front and rear tires helps prevent uneven wear over time, extending the overall lifespan of the tires and ensuring driving safety. 2. This is particularly relevant for models with less precise chassis data. For vehicles with highly accurate chassis alignment data, rotating the front and rear tires can have drawbacks, primarily affecting the chassis data and causing the vehicle to pull to one side.
118
Share

How to Solve the Problem of Loud Tire Noise in Civic?

Tire noise is too loud should check the tire tread, whether it is uneven wear. Here are the specific methods: 1. If there is uneven wear, it is a problem with wheel alignment, realign the wheels. 2. If there is no uneven wear but the noise is still loud, replace with new tires. 3. Do sound insulation for the wheel arches, you can use quiet tires, the noise will be reduced. Tire noise: usually caused by uneven tire wear with bumps and grooves producing noise (check if there are obvious bumps or uneven wear on the tires), or poor body sound insulation allowing tire noise to enter the cabin (usually caused by small stones being thrown up by the tires rolling against the inner fender, replacing the inner fender with one that has soft padding can reduce the noise).
114
Share

How often should the transmission fluid be changed for an Audi Q5?

Audi Q5's automatic transmission fluid is recommended to be changed approximately every 60,000 to 80,000 kilometers. The following are symptoms of deteriorated transmission fluid: 1. Slipping: During the process of gradually increasing engine speed, the rise in torque may cause gear slippage. 2. Oil leakage: Poor sealing of the transmission, possibly due to gasket or seal issues. 3. Jerking: May be caused by dirty transmission fluid leading to intermittent lubrication. 4. Abnormal noise: Presence of excessive debris and impurities in the transmission fluid. 5. High temperature: A transmission high-temperature warning indicator will appear on the dashboard. 6. Stalling: Possible failure of the lock-up control valve components.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.