···
Log in / Register

Where is the cigarette lighter fuse in the Sylphy?

6Answers
EmmettMarie
07/29/2025, 11:19:57 AM

The cigarette lighter fuse in the Sylphy is located inside the fuse box under the cover panel on the left side of the steering wheel. The cigarette lighter is a component found in all cars, designed to provide a flame source for smokers. Commonly referred to as cigarette lighters, they can be divided into those that draw power from the vehicle's electrical system. Some manufacturers produce cigarette lighters not for lighting cigarettes but for drawing power from the car, which are also known as cigar lighters. The steps to replace a cigarette lighter fuse are as follows: 1. Open the fuse box or the designated fuse storage compartment in the car. 2. Refer to the corresponding chart to locate the cigarette lighter fuse among the many fuses. 3. Carefully remove the cigarette lighter fuse, ensuring not to touch other electrical components. 4. Upon removal, you will notice the fuse has blown. Measure the fuse size, purchase a new one accordingly, and reinstall it.

Was this review help?
110
Share
LeColton
08/14/2025, 04:06:00 AM

I also encountered a problem with the cigarette lighter not supplying power when I drove a Sylphy before. Later, I found out the fuse was in the fuse box under the steering wheel. Squat down and look at the position near your left knee on the driver's seat, there's a small cover that you can pry open. In my case, it was the 15A fuse labeled CIG or cigarette lighter that blew. When replacing it yourself, remember to first remove the key to cut off the power, then carefully pull it out with tweezers and replace it with a new 15A fuse of the same color. However, it's worth noting that the cigarette lighter supports a maximum of 120W. Last time, mine blew because I connected a high-power vacuum cleaner. It's perfectly sufficient for charging phones normally. It's a good idea to keep a few spare fuses in the glove box—you can buy ten for just one yuan at an auto parts store.

Was this review help?
3
Share
Expand All
Nancy
10/11/2025, 03:49:31 AM

My friend's car charger suddenly stopped lighting up, so I helped check the cigarette lighter fuse on the Nissan Sylphy. This car has two fuse boxes, and the one for the cigarette lighter is located near the driver's left foot. You'll need to crouch down to see it - there's a black plastic cover with clips. After opening it, you'll find densely packed fuse blades inside. Look for the blue 15A fuse, which might be in position 12 or 20. Remember to turn off the engine and power when replacing it, and use the plastic tweezers from the tool kit. By the way, coins can easily fall into the cigarette lighter socket and cause short circuits - I've seen several car friends fall victim to this. Always remember to disconnect power when cleaning for safety.

Was this review help?
18
Share
Expand All
LaCamilla
11/24/2025, 09:08:42 PM

During the last road trip, the car refrigerator suddenly lost power, and it turned out that the cigarette lighter fuse in the Nissan Sylphy blew. I found the rectangular fuse box above the driver's left foot, opened the cover, and saw the icons on the inner wall indicating the fuses. Look for the 15A blue fuse, which might be labeled "CIGAR." When replacing it, pay attention to three things: make sure to turn off the ignition, use a dedicated fuse puller to remove and insert it vertically, and ensure the new fuse has the exact same amperage. Also, remember to check if the cigarette lighter socket is blocked by any foreign objects—in my case, a coin had fallen in and caused a short circuit. It's best to unplug the charger when parking to avoid standby power consumption issues.

Was this review help?
1
Share
Expand All
LaWillow
01/14/2026, 10:40:49 PM

When I first bought the Nissan Sylphy, the cigarette lighter wouldn't charge. I spent quite a while figuring out the fuse location. Under the steering wheel on the left side, in front of the knee position, there's a storage compartment-shaped cover panel. You can pry it open along the edge with your fingernail to reveal three rows of colored mini fuses. The cigarette lighter fuse is usually the blue 15A one at the bottom of the left column. Replacing it yourself is simple - just pull it out by hand after turning off the engine. But note that the factory-installed fuses are mini ATO size - buying the wrong model won't fit. This issue often occurs when using cigarette lighter expanders, especially with triple adapters that easily overload. It's safest to use it alone.

Was this review help?
13
Share
Expand All
DelRosalie
04/11/2026, 01:28:33 AM

My colleague's Sylphy cigarette lighter failed, so I helped him look up information to locate the fuse. The fuse box is hidden behind the interior panel above the driver's left foot and can only be seen by lying on your back. Specifically, it's the small blue 15A fuse labeled P/W OUT or CIG, located in the middle row of the fuse box. Remember to disconnect the negative terminal of the battery for safety before working, and use needle-nose pliers wrapped with tape for the operation. Owners who frequently experience blown fuses in the cigarette lighter should check the alternator's output voltage, as excessive voltage can also cause frequent fuse failures. If you can't handle it yourself, a Nissan dealership charges around 30 yuan for replacing a fuse.

Was this review help?
14
Share
Expand All
More Q&A

What are the differences between BMW series?

BMW series have the following differences: 1. Different models: The 1 Series is a compact car, the 2 Series is a subcompact coupe, the 3 Series is a midsize car, the 4 Series is a midsize coupe (including convertibles), the 5 Series is a full-size car, the 6 Series is a full-size coupe (including convertibles), and the 7 Series is a luxury D-segment car. 2. Different powertrains: The i Series represents BMW's electric and hybrid vehicle lineup, M stands for BMW's high-performance and sports car versions, the X Series is BMW's dedicated SUV (Sports Utility Vehicle) lineup, and the BMW Z Series is BMW's entry-level sports car. The production version of the BMW 4 Series is essentially derived from the 4 Series Coupe concept car, replacing the previous 3 Series Coupe.
101
Share

What are the differences between the Mercedes-Benz C180L and C200L?

The main differences between the Mercedes-Benz C180L and C200L lie in the engine power, and there are also variations in their configurations. Here is some relevant information about the Mercedes-Benz C180: 1. Basic Introduction: The Mercedes-Benz C180 is a C-Class model. Beijing Benz officially launched the C180 variant of the C-Class in June 2010, naming the model C180. It is equipped with a 1.6-liter supercharged engine, with an actual engine displacement of 1598 milliliters, which is less than 1600 milliliters. 2. Performance Analysis: Although the new Mercedes-Benz C180K model is only equipped with a 1.6-liter displacement engine, its maximum power and torque reach as high as 115Kw/5200 and 230N·m/3000-4500, respectively, which are 15Kw and 50N·m higher than those of the BMW 318i with a 2.0-liter displacement.
109
Share

How to Prevent Mice from Entering the Car

Here are methods to prevent mice from entering the car: 1. Clean the car promptly after eating to avoid attracting mice with food residues. Regularly remove clutter and maintain cleanliness; avoid storing food inside. 2. Switch the air conditioning to recirculation mode when parking. Blocking the vents can prevent small animals from entering through them. This is especially important for vehicles left unused for extended periods. 3. Install a rodent-proof mesh on the co-pilot side vent or place deterrents like mothballs in the engine compartment. 4. Apply repellents. Spray substances like Tiger Balm or insecticides near the hood and front wheels, and inspect multiple times before starting the car. 5. Regularly check the grilles outside the air conditioning vents. Repair any damages immediately if found.
113
Share

Differences between Rubicon and Sahara

sahara and rubicon differ in appearance, chassis, road passing ability and transmission. The following is a detailed introduction to the differences between the two vehicles: 1. Appearance: The color of Sahara's fenders is the same as the color of the car, while Rubicon's fenders are all black. 2. Chassis: Rubicon uses DANA44 series for both front and rear axles, while Sahara uses DANA30 and DANA35 for front and rear axles. Rubicon has higher strength and is relatively more expensive. 3. Road passing ability: Rubicon has stronger off-road capability because both front and rear axles are equipped with differential locks, while Sahara's rear axle is only equipped with a limited-slip differential. 4. Transmission: The maximum torque of Rubicon's transmission is 7000 N·m, while Sahara's transmission has a maximum torque of only 3000 N·m, so Rubicon's transmission has a longer lifespan.
104
Share

What Causes the Shock Absorber Spring to Make a Popping Sound When Turning?

Shock absorber springs making a popping sound when turning may be due to damage to the planar bearing inside the shock absorber spring or aging of the shock absorber top rubber. It is recommended to directly replace the shock absorber or the shock absorber top rubber. Generally, shock absorbers should be replaced every 4 years, and the shock absorber top rubber is best replaced every 80,000 kilometers. Specific explanations are as follows: Shock Absorber: Generally, shock absorbers should be replaced every 4 years. When replacing shock absorbers, they should be replaced in pairs; otherwise, it may lead to uneven balance of force distribution in the car, causing different forces on the shock absorbers and further shock absorber issues. Shock Absorber Top Rubber: The shock absorber top rubber is used to cushion the impact between the shock absorber spring and the car body. When driving on uneven roads, each top rubber bears more than a quarter of the car's weight impact. A silicone pad can be added to the shock absorber top cover, and adding silicone to the shock absorber is useful.
101
Share

What Causes Abnormal Noise in the Rear Wheels When Braking?

Abnormal noise in the rear wheels when braking may be caused by the following reasons: Break-in period for new cars: New cars or newly replaced brake pads have a break-in period, during which some abnormal noise may occur. Typically, the noise will disappear after the car has been driven for a few hundred kilometers. Normal ABS activation: The ABS system operates in a cycle of locking and releasing the brakes, keeping the vehicle in a state of near-lock rolling. When the ABS is activated by hard braking, it may produce a clicking sound, which is normal. In this case, simply press the brake pedal firmly to the floor. Severely worn brake pads: Worn-out brake pads can also cause abnormal braking noise. Most brake pads have wear indicators that will make a sharp noise when the pads are worn to their limit, signaling the need for immediate replacement to avoid accidents. Foreign objects between the brake discs: Small stones or a water film between the brake disc and pad can cause abnormal noise. This can often be resolved by pressing the brake pedal a few more times or removing the small stones.
110
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.