···
Log in / Register

Where is the Golf CD fuse located?

4 Answers
ClaireDella
08/28/25 2:13am

The Golf CD fuse is located in the fuse box under the dashboard. Observe carefully under the dashboard to locate it. The main function of the fuse is to protect the vehicle's circuit safety, preventing excessive current that could cause the car's circuit to burn out and result in unnecessary damage. Car owners should regularly check the vehicle's fuses to avoid damage. Taking the Golf 7 as an example, this car is a compact model under FAW-Volkswagen, with body dimensions of 4296mm in length, 1788mm in width, and 1471mm in height, a wheelbase of 2636mm and 2631mm, and a body structure of a 5-door, 5-seat hatchback.

Was this review help?
4
2
Share
MacCooper
09/09/25 7:41am

I have a Golf car, and the CD player isn't working—most likely it's a fuse issue. The fuse box is located behind the glove compartment on the passenger side. First, open the glove compartment and look carefully inside; you'll find a small black box labeled 'Fuse Box.' Pull it down, and you'll see multiple fuses inside. The one specifically for the CD player is usually in the middle row, marked with 'RADIO' or 'CD.' Remember to turn off the car lights before working on it to avoid accidents. Last time my car's CD player wasn't working either, and after checking, it turned out the fuse was blown. Replacing it with a new one fixed the issue immediately. The fuse might blow due to voltage fluctuations or CD player overload, so try not to turn the volume too high while driving to reduce the chances of it happening. The whole check is quite simple—you can do it yourself and save a trip to the repair shop. Just avoid using excessive force when handling the parts.

Was this review help?
16
1
Share
Expand All
Arianna
10/23/25 8:32am

As a fellow car enthusiast who often tinkers with vehicles, let me explain the location of the CD fuse. It's located in the Golf's fuse box, specifically on the inner side of the glove compartment near your knee. Open the glove box and push hard upwards to reveal the fuse box, which has a legend indicating the purpose of each fuse. The CD fuse is usually in a certain numbered position, which may vary by model year, but most are clearly labeled. If the CD player isn't lighting up, try replacing the fuse first. Blown fuses are quite common, usually caused by sudden current surges, but don't overlook other potential factors like loose wiring connections. When replacing it yourself, use a dedicated tool or small tweezers to remove the old fuse, then insert a new one with the same amperage rating. Don't forget to turn off the power to prevent short circuits—this small step can prevent major issues.

Was this review help?
18
2
Share
Expand All
McElias
12/07/25 2:08am

Finding a non-working CD fuse isn't difficult - it's located under the cover on the lower left side of the steering wheel. Lift that panel, and you'll see rows of fuses in the fuse box. The CD fuse is usually a small square in the middle or left side marked with an audio symbol. For safety, turn off the engine and remove the key before working on it. Fuses often blow because the audio system draws more power during overload. Typically, replacing it solves the problem. Last time my car's CD went silent, replacing the fuse made it work again. Just remember to buy the correct specifications - don't cheap out on poor quality ones. This minor repair isn't difficult, the key is not to mess up the wiring.

Was this review help?
12
4
Share
Expand All
More Forum Discussions

What is the function of the braking ABS system?

The functions of the braking ABS system are: 1. Automatically controlling and adjusting the wheels; 2. Preventing the vehicle from experiencing braking deviation, spinning, or fishtailing during emergency braking, which could result in loss of directional control. The working principle of the braking ABS system is: 1. Determining the wheel lock-up state based on the speed signals from the wheel speed sensors; 2. Closing the input solenoid valve on the wheel that begins to lock up to maintain the braking force; 3. Opening the output solenoid valve when the wheel is locked up for an extended period, causing the braking pressure on the wheel to rapidly decrease through the pipeline connected to the brake fluid reservoir, preventing the braking force from completely locking up the wheel.
8
0
Share

Can a car be equipped with a roof rack?

Roof racks can be installed, but it depends on the situation. In my opinion, installing a roof rack can be divided into two scenarios. One is when the vehicle comes with a roof rack from the factory, and additional racks are installed as needed later. The other is when the vehicle does not come with a roof rack from the factory, and it needs to be installed afterward. According to the "Motor Vehicle Inspection Work Regulations" (GA801-2019): Installing a roof rack without changing the vehicle's length, width, or main body structure and ensuring safety does not require registration or modification of the vehicle license. Additionally, the installed rack must not affect the vehicle's length and width, and the height of the rack must not exceed 300mm. Article 54 of the "Implementation Regulations of the Road Traffic Safety Law of the People's Republic of China" states that the load carried by a motor vehicle must not exceed the approved load capacity specified on the vehicle license, and the length and width of the load must not exceed the dimensions of the vehicle body. The following regulations must also be observed: Passenger vehicles are not allowed to carry cargo except for the external roof rack and built-in luggage compartment. When carrying cargo on the roof rack of a passenger vehicle, the height from the roof must not exceed 0.5 meters, and the height from the ground must not exceed 4 meters.
3
2
Share

How to Reset the Maintenance Light on Jeep Renegade?

The method to reset the maintenance light on Jeep Renegade is: 1. With the engine turned off, press the trip odometer reset button; 2. Turn the ignition switch to the 'on' position, release the trip odometer reset button, and the display will show 'service'; 3. Pull out the minute button on the clock and turn it to the right, the mileage will appear on the screen; 4. Turn off the engine to reset the reminder message; 5. Turn the ignition switch to the 'on' position, and the 'service' message will disappear. The maintenance light is set by the manufacturer to remind the owner to service the vehicle in the form of a message or indicator light. Resetting the maintenance light means zeroing the reminder message.
12
2
Share

How to Reset the Maintenance Light on a Changan Vehicle?

To reset the maintenance light on a Changan vehicle, follow these steps: 1. Turn the ignition switch to the 'on' position to power up the entire vehicle; 2. Press the selection button located on the left side of the steering wheel; 3. Hold down the reset button for 5 seconds, then turn off the vehicle's power; 4. Restart the vehicle's power to complete the reset. Taking the 2021 Changan CS75 Luxury model as an example, its body dimensions are: length 4670mm, width 1865mm, height 1700mm, with a wheelbase of 2710mm. The 2021 Changan CS75 Luxury model features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 178PS, maximum power of 131kW, and maximum torque of 265Nm, paired with a 6-speed manual transmission.
14
1
Share

Does the Santana have an anti-collision beam?

The Santana has a front anti-collision beam but no rear anti-collision steel beam. The function of the anti-collision beam is to absorb collision energy and reduce the impact on the vehicle. Taking the 2021 manual basic version Santana as an example, its body dimensions are: 4475mm in length, 1706mm in width, and 1469mm in height, with a wheelbase of 2603mm, a fuel tank capacity of 52.8 liters, and a trunk capacity of 466 liters. The 2021 manual basic version Santana has a MacPherson independent front suspension and a compound torsion beam non-independent rear suspension. It is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 112ps, a maximum power of 82kW, and a maximum torque of 145Nm.
19
0
Share

What is the ground clearance of the Changan Eado?

The ground clearance of the Changan Eado is 160mm. Its body dimensions are: length 4730mm, width 1820mm, height 1505mm, with a wheelbase of 2700mm. The fuel tank capacity is 53 liters, the trunk capacity is 500 liters, and the curb weight is 1300kg. The 2020 Blue Whale Edition Changan Eado features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 158PS, maximum power of 116kW, and maximum torque of 260Nm, paired with a 7-speed dual-clutch transmission.
18
2
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.