···
Log in / Register

Where is the fuel pump relay for the BYD F3 located?

5Answers
Thompson
07/24/2025, 04:07:23 PM

The fuel pump relay for the BYD F3 is located on the wiring harness assembly, not inside the fuse box. The wiring harness assembly is positioned below the left side of the steering wheel. Upon careful inspection, you can find a white box containing four relays. The second relay from the left is the starter relay. The BYD F3 is positioned as a compact car, equipped with a 1.5L inline 4-cylinder naturally aspirated engine across all models. It is paired with either a 5-speed manual or a 6-speed dual-clutch transmission, delivering a maximum power of 80KW, a maximum horsepower of 109PS, and a maximum torque of 145NM. In terms of suspension, the BYD F3 features a MacPherson strut independent front suspension and a torsion beam non-independent rear suspension.

Was this review help?
115
Share
DeMarley
09/26/2025, 12:32:54 AM

I've been driving a BYD F3 for several years. Once, the fuel pump had an issue, and I spent quite some time figuring out where the relay was located. It's positioned inside the engine compartment fuse box. Specifically, after opening the hood, look towards the left corner—there's a small black box that you can lift open to reveal various small components. The fuel pump relay is shaped like a small square with several pins. Checking it is straightforward: use a multimeter to test for electrical continuity or simply replace it with a new one. If the relay is faulty, the car will have difficulty starting and produce loud noises. A repair shop might charge you a few dozen yuan to fix it, but doing it yourself only costs a few yuan for the part, saving you some money. A related maintenance tip: avoid working on it immediately when the engine is hot to prevent burns. If relay failures occur frequently, check if the voltage is stable to avoid affecting the fuel supply system.

Was this review help?
6
Share
Expand All
DelLaura
11/09/2025, 01:34:33 AM

I don’t usually know much about cars, but I just researched the BYD F3. The fuel pump relay is located in the engine compartment fuse box area. After opening the engine hood, you can find it clipped among a bunch of fuses inside the plastic box near the windshield. It can be confusing for beginners to locate, so if the markings are unclear, refer to the owner’s manual diagrams or online videos. Always ensure the engine is off and the battery is disconnected for safety before any operation. If the relay fails, the fuel pump won’t supply fuel, causing the car to shake. Timely checks can prevent being stranded on the road and avoid unnecessary trouble.

Was this review help?
20
Share
Expand All
VonJude
12/30/2025, 03:21:38 AM

From a cost-saving perspective, when repairing a BYD F3, the fuel pump relay is located inside the engine compartment fuse box, specifically in the right slot under the box cover. DIY replacement only requires purchasing a replacement part for plug-and-play testing. A common symptom of a burnt-out relay is the absence of the fuel pump's humming sound for a few seconds after turning the key, indicating a malfunction. The cost is low, and replacing it yourself can save dozens of yuan in repair fees. Remember to keep it dry to avoid moisture corrosion on the contacts. Located near the engine, it ages quickly in high-temperature environments, so check for looseness to prevent intermittent issues that could delay your trip.

Was this review help?
15
Share
Expand All
LeCody
03/27/2026, 10:32:53 PM

I pay attention to vehicle maintenance. The BYD F3 fuel pump relay is generally located in a specific position within the engine compartment fuse box. After opening the cover, look for markings in the front area such as the 'FP' label to accurately identify it. A faulty relay affects the fuel pump's operation, leading to startup failure or stalling while driving. Therefore, regularly cleaning carbon deposits from the contacts can prevent premature failures. Its location near the engine should be well-ventilated and free from dust. When searching for it, take your time to match the correct position and avoid pulling the wrong neighboring fuse. Safety first—always disconnect the power before proceeding. If there are abnormal clicking sounds, the relay might be repeatedly engaging and disengaging, requiring replacement to resolve the issue.

Was this review help?
1
Share
Expand All
More Q&A

What transmission does the Shadow Leopard use?

The transmission brand used in the Shadow Leopard is Aisin. Established in 1969, Aisin is a world-renowned professional developer and manufacturer of automotive automatic transmissions. In the field of automotive automatic transmissions, Aisin's products hold the highest market share globally. The Shadow Leopard uses a 7-speed wet dual-clutch transmission. A wet dual-clutch transmission refers to a dual-clutch transmission where the clutch plates are immersed in transmission fluid. There are two types of dual-clutch transmissions: dry and wet. When using the Shadow Leopard's transmission in daily driving, pay attention to the following points: Do not delay changing the transmission fluid for too long. Prolonged failure to change the transmission fluid can damage internal components such as bearings and the housing. Avoid coasting in neutral for extended periods. While driving manual transmission vehicles, many experienced drivers may coast in neutral, but for automatic transmission vehicles, this can cause overheating and create a shock when shifting back into Drive (D) mode. Never shift into Drive (D) or Reverse (R) before the vehicle comes to a complete stop. Many drivers, aiming for smooth operation, shift into reverse while the vehicle is still moving, which can severely damage the transmission gears and lead to gear grinding over time. Avoid frequently climbing steep slopes in Drive (D) mode. Automatic transmission vehicles may overheat under high loads or shift too early, resulting in insufficient power. In such cases, use manual mode to limit lower gears or switch to sport mode to protect the transmission. Do not tow the vehicle over long distances. If an automatic transmission vehicle breaks down, use a flatbed tow truck to move it onto the tow platform while in Neutral (N) mode. Avoid using tow ropes or directly towing the vehicle.
102
Share

Can motorcycles go on highways in Shanghai?

Motorcycles are not allowed on highways in Shanghai because it is very dangerous and prone to safety accidents. Here is some relevant information about motorcycles: Definition: A motorcycle is a two- or three-wheeled vehicle powered by a gasoline engine and steered by handlebars. It is lightweight, flexible, fast, and widely used for patrols, passenger and cargo transportation, as well as sports equipment. Classification: Broadly speaking, motorcycles can be divided into street bikes, road racing motorcycles, off-road motorcycles, cruisers, and touring bikes. They are a flexible and fast means of transportation that was once widely used.
104
Share

What is the height of the Toyota Land Cruiser Prado?

Toyota Land Cruiser Prado has a body height of 1890mm. Here are more details about the Toyota Land Cruiser Prado: Body dimensions: The length, width, and height of the Toyota Land Cruiser Prado are 4840mm, 1885mm, and 1890mm respectively, with a wheelbase of 2790mm. Exterior design: The Prado adopts Toyota's family-style design concept. The front face features a large-area grille, with the headlight clusters connected to the grille. The headlight clusters adopt a flat design similar to the current Land Cruiser, giving the overall appearance a sharper and more domineering look. The front grille uses an inverted trapezoidal design, complemented by wide chrome trim, making the entire front end appear more luxurious.
116
Share

What are the dimensions of the Tiida in terms of length, width, and height?

2021 Tiida has a body length of 4393mm, a width of 1766mm, a height of 1539mm, and a wheelbase of 2700mm. Here is more information about the Nissan Tiida: Name Origin: The name Tiida is derived from the meaning of 'Qi Ji,' which refers to a swift horse, further interpreted as 'a swift horse galloping a thousand miles with speed and agility.' Powertrain: The Tiida is equipped with a 1.6-liter HR16DE all-aluminum inline 4-cylinder engine, featuring a DOHC (Double Overhead Camshaft) structure combined with CVTC (Continuous Variable Valve Timing Control) technology. This results in a 20% reduction in fuel consumption compared to engines of the same displacement. It delivers a maximum power of 80KW at 6000 RPM and a maximum torque of 153NM at 4400 RPM.
115
Share

What is the fuel tank capacity of the Sorento in liters?

The fuel tank capacity of the Sorento is 70L. Here is some additional information: Exterior-wise, the Sorento showcases its off-road capability through its overall imposing presence rather than exaggerated details. The bold front headlights and distinctly European-inspired body design, along with well-defined curves and angular wheel arches, create a harmonious blend of strength and elegance. The transitions between the A-pillar, C-pillar, and roofline are smooth, and the meeting point of the hood, fender, and A-pillar is well-integrated. The dimensions of the Sorento are 4567 1863 1730mm (L W H). Interior-wise, the cabin is equally impressive, matching its rugged exterior with a sporty and adventurous character. The dynamic and sturdy 4-spoke steering wheel ensures precise handling, while aluminum alloy pedals are a standard feature in vehicles of this class.
120
Share

What causes the instrument panel halo to turn blue in the Vezel?

When the blue light appears on the Vezel's instrument panel halo, it indicates that the vehicle's water temperature is too low, which can affect driving safety. In this situation, simply drive gently until the water temperature rises, and the blue light will turn off. Relevant information about the car's instrument panel is as follows: Introduction: The instrument panel is a rigid plate or structural component used for mounting instruments and related devices. It can be categorized by type into screen-type, frame-type, channel-type, and cabinet-type instrument panels. Function: The instrument panel can feature external lighting and may include an attached control console. Available in various forms and specifications, it can be equipped with different instruments as needed, or multiple instrument panels can be combined into a single unit according to requirements.
116
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.