···
Log in / Register

Where is the fuel consumption display for the Trumpchi GS4?

6Answers
HazelLee
07/28/2025, 08:33:00 PM

Trumpchi GS4 fuel consumption display location: It is shown on the driving information interface of the car dashboard. Here are some related content introductions: 1. DISP button: Short pressing the DISP button can switch between different driving information, which helps the owner understand various aspects of the vehicle's condition. 2. Positioning: The Trumpchi GS4 is positioned as an "International New SUV" with a total of 8 models launched. 3. Body dimensions: The Trumpchi GS4 has a length, width, and height of 4510mm, 1852mm, and 1708mm respectively, with a wheelbase of 2650mm. 4. Exterior: The Trumpchi GS4 features a bold and imposing front face design, dynamic and smooth when moving, and stately when stationary.

Was this review help?
103
Share
WestonMarie
08/11/2025, 06:06:37 AM

As an owner of the Trumpchi GS4 for three years, I can tell you that the fuel consumption display is located on the central information screen of the dashboard, which is quite intuitive. Here's how to operate it: After starting the vehicle, look for the buttons on both sides of the steering wheel. On the left, there are up and down arrow buttons, and on the right, there's a small scroll wheel or confirmation button. Press these buttons a few times to switch display modes. Usually, the initial screen shows the speedometer, but you can scroll to view the average or instantaneous fuel consumption values, displayed in a format like 7L/100km. I recommend keeping an eye on this display while driving, as it reflects your driving habits—for instance, aggressive acceleration leads to higher fuel consumption, reminding you to save on fuel costs. My GS4 averages around 7L in the city and is even more economical on highways. Another tip: You can reset the fuel consumption data in the dashboard menu to recalculate the average for a new journey. If visibility is poor on foggy days, try adjusting the brightness by turning on the backlight. Regular checks can also help detect anomalies, such as a sudden spike in fuel consumption, which might indicate tire pressure issues or the need for engine maintenance. In short, the display is right there—just try it a few times, and you'll get used to it.

Was this review help?
4
Share
Expand All
JudahAnn
10/01/2025, 03:38:21 AM

I've been driving the GAC GS4 for several months now, and the fuel consumption display is right on the dashboard screen in front of the steering wheel. It's very simple to operate. After starting the car, just press the left or right buttons on the steering wheel a few times to switch views. Common displays include instant fuel consumption and average fuel consumption, with the numbers popping up directly on the screen. When I first got the car, I found it by randomly pressing a few buttons, and now I check it every time I start the car to ensure everything is normal. It's quite practical in daily use, such as checking the remaining mileage before a long trip to avoid running out of fuel halfway. The GAC GS4's fuel consumption design is excellent—my car averages around 7.5L in suburban areas. If the display is blurry or delayed, it might be a sensor issue; I recommend cleaning the dashboard or checking the fuses. Monitoring fuel consumption regularly can also help optimize driving habits, like reducing sudden braking. For beginners, the user manual provides detailed steps, or the app can offer historical data for reference. Don't worry about not finding it—the location is fixed, though the button feel might vary slightly depending on the model year.

Was this review help?
12
Share
Expand All
OVanessa
11/14/2025, 09:37:55 PM

I've been using the Trumpchi GS4 for a while, and the fuel consumption display is located on the small screen in the center of the instrument panel. The operation is: after ignition, press the steering wheel buttons to switch, and you can usually see the fuel consumption figure within seconds. This design is quite standard for Trumpchi models, with display content including average fuel consumption, instantaneous fuel consumption, etc. Observing this regularly while driving can help avoid abnormal fuel consumption. It's recommended for beginners to start exploring from the basic buttons, as it's very easy to get the hang of.

Was this review help?
3
Share
Expand All
SanAshlyn
01/04/2026, 11:16:38 PM

I just started driving the Trumpchi GS4 not long ago, and I've figured out where the fuel consumption is displayed—it's on the instrument cluster screen. The simple steps are: start the car, focus on the central area of the instrument cluster, then use the up and down buttons on the left side of the steering wheel to scroll through the pages. Sometimes, pressing a few times until you see the words 'Fuel Consumption' or 'Average' will do the trick. I remember on my first day driving, I got the hang of it after just a couple of tries. The display will show you the current fuel consumption, like 7-8L, and it tends to be higher in the city. Checking it frequently helps develop fuel-saving habits, such as avoiding sudden acceleration. If the buttons don't respond, first make sure the vehicle is fully started. The position is always fixed there, so don't mistake it for other screens like the navigation display. New users can refer to the manual to understand the icons more quickly.

Was this review help?
1
Share
Expand All
LaIris
04/01/2026, 11:12:31 PM

Our family uses the Trumpchi GS4 as our daily commuter car, and the fuel consumption display is a feature I frequently use, located in the instrument cluster information area. After ignition, simply press the steering wheel buttons to switch and find it, clearly displaying the average fuel consumption value. The operation process is quite straightforward: press the right or left button a few times to navigate to the correct page, saving time and effort. Our car's fuel consumption is around 7L, which is economical and practical. It's recommended to check it regularly to spot any abnormal changes, such as a sudden increase in fuel consumption, which may prompt checking tire pressure or the engine. The location is conveniently designed, making it even more practical during long trips when combined with the remaining mileage display. It also serves as a simple way to teach kids basic car knowledge. The button layout may vary slightly depending on the version, but it's generally similar—just try it out to master it.

Was this review help?
4
Share
Expand All
More Q&A

What is the purpose of the HDMI port in a car?

The purpose of the HDMI port in a car is to input audio and video from other electronic devices into the vehicle's audio-visual system. The HDMI port in a car refers to the High-Definition Multimedia Interface, which is a fully digital video and audio transmission interface capable of sending uncompressed audio and video signals. HDMI can be paired with Broadband Digital Content Protection to prevent unauthorized copying of copyrighted audio and video content. The method of using HDMI in a car is as follows: plug in the corresponding interfaces, and both the phone and the car screen will prompt that they are connecting. No additional drivers need to be downloaded, and after waiting a few seconds, the phone screen will be mirrored onto the car screen. If there is no response, the phone may need to be restarted.
104
Share

Is it necessary to affix the inspection compliance label for a new car?

New cars do not require the affixation of an inspection compliance label, as the electronic certificate for motor vehicle inspection has been implemented nationwide. 1. Electronic Certificate: After completing the new vehicle registration and inspection procedures, owners can directly apply for it through the "Traffic Management 12123" mobile app. The electronic inspection certificate holds the same validity as the paper label. 2. Labels to be Affixed: According to previous regulations, motor vehicles were required to display three labels: the environmental inspection compliance label, the compulsory traffic insurance label, and the vehicle inspection compliance label. However, with the advancement of the information age and the gradual simplification of vehicle-related procedures, many inspection labels have begun to merge and are now being digitized.
112
Share

What to Do When Rear-Ended by Another Vehicle?

After a rear-end collision occurs, the driver should immediately stop the vehicle, secure the scene, and promptly report to the police and notify the insurance company. Below is relevant information about rear-end collisions: 1. Introduction to Rear-End Collisions: A rear-end collision refers to an incident where the front of a following vehicle impacts the rear of the leading vehicle while both are traveling in the same lane. This is mainly caused by the following distance being less than the minimum safe distance, delayed driver reaction, or poor braking system performance. 2. Tips to Prevent Rear-End Collisions: Reduce speed in advance when approaching sections with blind spots, such as large undulating roads. Maintain the same speed when going uphill and downhill, and be prepared for emergency stops or lane changes. Avoid following too closely; maintain a sufficient safe distance and always be ready to brake in case the leading vehicle brakes suddenly. Try to avoid sudden braking. If a situation arises, slow down in advance and use intermittent braking to alert the following vehicle. Novice drivers should avoid using the fast lane whenever possible.
101
Share

How often should a newly purchased motorcycle undergo an annual inspection?

For motorcycles, within the first 4 years, they must be inspected every 2 years; after exceeding 4 years, they must be inspected annually. According to Article 16 of the "Regulations for the Implementation of the Road Traffic Safety Law of the People's Republic of China," motor vehicles must undergo safety technical inspections according to the following intervals from the date of registration: 1. Interval One: Passenger vehicles for commercial use must be inspected annually within the first 5 years; after exceeding 5 years, every 6 months. 2. Interval Two: Trucks and large or medium-sized non-commercial passenger vehicles must be inspected annually within the first 10 years; after exceeding 10 years, every 6 months. 3. Interval Three: Small and micro non-commercial passenger vehicles must be inspected every 2 years within the first 6 years; after exceeding 6 years, annually; after exceeding 15 years, every 6 months. 4. Interval Four: Motorcycles must be inspected every 2 years within the first 4 years; after exceeding 4 years, annually.
107
Share

Where is Lincoln Made?

Lincoln is made in the United States. Here is an introduction to Lincoln cars: 1. Exterior introduction. The only horizontal bar on the front grille has been completely removed, replaced by more densely arranged vertical slats for decoration; the front bumper has been changed to a three-bar pattern, appearing more slender. 2. In terms of power performance. The new MKT is equipped with a 3.5-liter EcoBoost engine and a 3.7-liter V6 engine. The EcoBoost features advanced technologies such as high-pressure direct fuel injection, advanced turbocharging, and dual independent variable valve timing systems, effectively improving fuel economy and reducing CO2 emissions.
104
Share

What are the differences between hydraulic bushings and rubber bushings?

Hydraulic bushings and rubber bushings have the following differences: 1. Applicability: Hydraulic bushings are suitable for excitation frequencies caused by low-frequency effects; rubber bushings are used when it is inconvenient to install rolling bearings. 2. Lubrication: When the leaf spring is working, there is no relative sliding between the rubber bushing and the pin, only elastic deformation of the rubber bushing, so there is no friction or wear, and no lubrication is required, reducing maintenance work; hydraulic bushings have friction and wear and require lubrication. 3. Frequency: The frequency and amplitude provided by the complete hydraulic device in the hydraulic bushing depend on the damping characteristics and are designed based on the Z-direction effect. The maximum matching damping of the hydraulic bushing can reach the critical frequency (resonance frequency) of the spring support block; rubber bushings do not have a hydraulic device and cannot reach the critical frequency (resonance frequency) of the spring support block.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.