···
Log in / Register

Where is the fog light switch on the Boyue?

6Answers
GiaDella
07/29/2025, 01:37:10 PM

The fog light switch on the Boyue is located on the lever on the lower left side of the steering wheel. The method to turn it on is: 1. Rotate the light control lever to the low beam mode; 2. Press the fog light switch to turn it on. The Boyue is a compact SUV with body dimensions of: length 4519mm, width 1831mm, height 1694mm, wheelbase 2670mm, and a fuel tank capacity of 58 liters. The Boyue is equipped with a 1.8T turbocharged engine, with a maximum power of 120kW at 5500rpm, and a maximum torque of 250Nm between 1500 to 4500rpm.

Was this review help?
108
Share
Cora
08/14/2025, 04:53:21 AM

I've been driving the Boyue for several years, and the fog light switch is usually located on the lighting control lever on the left side of the steering wheel. To be more specific, it's on a small rotary wheel on the inner side or front end of the lever. After starting the car, first turn on the low beam by rotating the knob to the outermost position or when the dashboard lights up, then gently twist the fog light rotary on the lever to activate the front fog lights. Pay attention to whether the fog light indicator on the dashboard lights up—that's a key confirmation point. The Boyue's design is quite thoughtful, with the switch being prominent and easy to operate, but remember to use it only in foggy conditions. Otherwise, driving with them on in clear weather can be too glaring and might annoy others or get you fined by traffic police. If you can't find it the first time, check the vehicle's manual for illustrations—it has precise markings to avoid unnecessary fumbling. Don’t force the switch to prevent damaging the parts, and if you're really unsure, just visit a 4S store for guidance—it’s free and hassle-free to ask.

Was this review help?
8
Share
Expand All
LaDawson
10/13/2025, 04:01:25 AM

From a safe driving perspective, let's talk about the fog light switch. When driving the Boyue, I often remind myself to familiarize with the fog light position, which is fixed on the left lever near the steering wheel. The operation involves turning on the headlights after starting the engine, then rotating the small knob to activate the fog lights. Proper usage is crucial, especially in foggy conditions where fog lights illuminate a wider area and reduce rear-end collision risks. However, never keep them on during good visibility - not only is it glaring but also illegal. I've seen new drivers sweating anxiously when struggling to locate it, which is dangerous. I recommend keeping the manual in the car or searching for online video tutorials. In vehicles like the Boyue, these switches are standardized and easy to master with a few practices. Developing good habits doesn't just protect your car but also ensures everyone's safety - this is fundamental driving knowledge.

Was this review help?
11
Share
Expand All
ChristopherFitz
11/26/2025, 09:12:28 PM

As a new owner of the Borui Yue, I figured this out during my initial period. The fog light switch is located on the light lever to the left of the steering wheel. After starting the car, turn on the light switch and simply twist the knob on the lever. The dashboard will display a fog light icon when it's activated. The design is intuitive without any complicated elements. I was a bit worried the first time, but after a few drives, I got familiar with it. The Borui Yue is user-friendly and easy to handle, so new owners shouldn't be afraid to try. Just remember to use the fog lights in foggy conditions—safety first.

Was this review help?
9
Share
Expand All
Amber
01/16/2026, 10:38:18 PM

Sometimes, people may mistake the fog light switch for a separate button, but in fact, on the Boyue, it is integrated into the rotary knob on the left stalk of the steering wheel. Reasons include variations in car models or differences in user habits, such as previous owners being accustomed to button-style switches. The operation involves turning on the headlights first and then rotating the fog light section. This design prevents accidental activation but requires some adaptation. The position is consistent across all Boyue models—just check for the fog light symbol on the stalk. In case of uncertainty, stop and inspect to avoid mistakes, ensuring safer driving.

Was this review help?
17
Share
Expand All
GideonFitz
04/13/2026, 12:42:10 AM

Using fog lights requires attention to maintenance. The switch for the Bo Yue's fog lights is located on the left lever of the steering wheel; gently twist it to turn on after the headlights are activated. Use fog lights sparingly during daily driving—only when necessary—to extend the lifespan of the components. Regularly check if the fog lights' brightness is normal or if there are any unusual noises; if they appear dim, it might indicate aging switch contacts that need replacement. Keep them clean to avoid dust blockage, especially in areas with frequent rain. Proper operation not only ensures convenience but also reduces the risk of malfunctions. Maintaining good vehicle condition makes driving more reassuring, and simple upkeep is sufficient.

Was this review help?
6
Share
Expand All
More Q&A

How to reset the maintenance light on BYD Tang?

Here are the steps to reset the oil maintenance reminder on BYD Tang: 1. First, locate the confirmation button on the right side of the multifunction steering wheel; 2. Then, the LCD screen will display menu items; 3. Use the up and down function selection keys on the right side of the multifunction steering wheel to press the confirmation button; 4. Select the maintenance time setting to complete the reset. Additional information: Cars generally using full synthetic oil have a longer replacement cycle compared to those using semi-synthetic oil and mineral oil. Engine oil lubricates the engine, reduces friction, assists in cooling, minimizes buffering, and extends the service life of engine components. Engine oils in the market are divided into synthetic oil and mineral oil, with synthetic oil further categorized into full synthetic oil and semi-synthetic oil.
118
Share

Can You Pull Out a Nail from a Tire?

Do not immediately pull out a nail from a tire. The nail punctures the tire but also acts like a plug. If you pull it out, it's like removing the plug, and the tire will definitely lose air. If the nail is thick, the tire will deflate immediately once the nail is removed. In this case, the only solution is to stay where you are and either change to a spare tire or call for roadside assistance. Tire leaks can be categorized into rapid leaks and slow leaks, and the appropriate response depends on the severity: 1. Rapid leak: Never continue driving—doing so can ruin the entire tire and poses a significant danger to the driver. Stop immediately and change to a spare tire. 2. Slow leak: You can drive slowly to a repair shop. Remember: Do not drive too fast or too far, and monitor the tire pressure constantly. It's also good to carry an air pump in the car to help maintain tire pressure until you reach the repair shop.
119
Share

How Often Should the Idle Motor Be Replaced?

Under normal circumstances, if the idle motor is not faulty or damaged, it does not need to be replaced. The idle motor is a component that controls the idle speed of a vehicle. When the engine is idling, it is referred to as idle speed. Its function is to adjust the cross-sectional area of the idle air passage according to the engine temperature and load, ensuring the engine maintains the optimal idle speed under different conditions. The idle motor regulates the area of the idle air port via a stepper motor based on the engine load during vehicle idle. This controls the intake air volume in the engine's intake manifold. Subsequently, the intake pressure sensor transmits the detected intake pressure signal to the ECU. The ECU then evaluates the intake air volume and engine load to calculate the required fuel injection amount, thereby adjusting the engine's idle speed. If the idle motor becomes faulty or damaged, the engine's idle performance under various operating conditions may be affected. The vehicle might exhibit unstable idle operation, engine shaking, uneven speed, or intermittent idle stalling. These issues could arise due to a clogged idle air passage or malfunctioning idle control components, necessitating timely inspection, repair, or replacement. Generally, the cost of replacing an idle motor at a repair shop varies. Timely maintenance is essential to ensure the vehicle's engine operates at its best condition.
102
Share

Can a Dash Cam Record Inside the Car?

There are various types of dash cams, and many of them come with dual-lens dash cams that can record the inside of the car. A dash cam records images and sounds during the vehicle's journey and related information. After installing a dash cam, it can record video images and sounds throughout the entire driving process, providing evidence for traffic accidents. The key points for selecting a dash cam are as follows: 1. Night vision effect. The night vision effect here refers to the recorder's strong low-light performance. 2. Audio recording. If it cannot be turned off, it is not conducive to privacy protection inside the car. Legitimate brands on the market produce dash cams with a one-touch mute function.
105
Share

Does the New Bora Have Anti-Collision Beams?

New Bora is equipped with anti-collision beams. This model has anti-collision beams installed inside the front bumper, all four car doors, and the rear bumper. Relevant information is as follows: 1. The function of anti-collision beams is to absorb and mitigate external impacts or protect the front and rear parts of the vehicle body. 2. Anti-collision beams are U-shaped channels made of cold-rolled steel plates, connected to the longitudinal beams of the vehicle frame, serving as the first barrier of passive safety in automobiles. 3. Anti-collision beams are divided into front and rear anti-collision beams. The front anti-collision beam is usually connected to the longitudinal beams of the vehicle body, protecting rear components such as the radiator.
114
Share

How Often Should Volkswagen Transmission Fluid Be Changed?

Volkswagen's after-sales service recommends changing the transmission fluid for automatic transmission models every 60,000 kilometers. Of course, if the driving environment is relatively harsh, the interval should be shortened accordingly. It is also essential to have regular inspections at authorized 4S dealerships and follow the professional technicians' recommendations for replacement. For manual transmission vehicles, if you notice any changes in gear shifting feel, unusual noises, or increased noise levels, you should promptly visit a 4S dealership for inspection and replacement. The hazards of not changing the transmission fluid for an extended period are as follows: 1. Prolonged failure to change the transmission fluid can lead to abnormal wear and severe deterioration of the fluid quality in the transmission. 2. Not changing the transmission fluid for a long time can cause the fluid to age and degrade, not only increasing fuel consumption but also shortening the transmission's service life. 3. Prolonged failure to change the transmission fluid can cause the fluid to become granular, clogging the oil passages and damaging the valve body, directly affecting the system's oil pressure and power transmission, resulting in delayed response and gear shifting shocks.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.