···
Log in / Register

Where is the engine number located on the Wuling Zhiguang?

6Answers
Ricardo
07/29/2025, 07:15:46 PM

Wuling Zhiguang's engine number is located on the right side of the cylinder block, near the transmission and oil pan, on a small platform below the right intake pipe. More relevant information is as follows: 1. "Wuling Zhiguang" is the first domestic model independently developed using advanced domestic technology with the support of the Pan Asia Technical Automotive Center, a joint venture between General Motors and SAIC Group. 2. "Wuling Zhiguang" is one of the first domestic models to pass the "Frontal Collision Occupant Protection" test certification without airbags, and it underwent comprehensive vehicle testing and verification according to the most advanced international automotive technical specifications, fully representing the advanced technology of the product.

Was this review help?
120
Share
BethanyAnn
08/15/2025, 09:36:20 PM

When I was helping out at the auto repair shop the year before last, I often dealt with customer complaints about the Wuling Guang, and found that the engine number location was quite regular. First, you need to open the engine hood and crouch down when there's good lighting. Aim your line of sight at the left front area of the engine, where a series of raised letters and numbers are engraved on the metal surface of the cylinder block near the firewall on the driver's side. The position is slightly low, so you’ll need to lean in closer to see it. It can easily be obscured by grease or dust, so I recommend gently wiping it clean with a dry cloth or tissue before noting it down. Sometimes it’s troublesome to find at night, so bringing a small flashlight can save time. The engine number is important for vehicle transfers, annual inspections, or insurance—if you can’t locate it accurately, it can cause delays. That’s why I always remind owners to ensure the engine is completely cooled before checking to avoid burns or accidentally touching other parts. Regularly cleaning this area can also extend the vehicle's lifespan.

Was this review help?
8
Share
Expand All
StAubree
10/18/2025, 03:48:48 AM

I just bought a used Wuling Zhiguang minivan, and last week I got stuck on the engine number during the transfer process. When I opened the engine hood, I was a bit confused at first. A friend taught me to look at the cylinder block area on the left front side, near the firewall on that small metal surface. After squatting down and taking a closer look, I finally found the engraved number. The location isn’t too hard to find, but it’s positioned quite low, and there are many pipes around the engine, so I had to gently move some aside to avoid scratches. The first time took me about ten minutes, but after wiping off the dirt, the number became clearly visible. Looking back now, beginners should be patient—use a flashlight if the lighting is poor, and take a photo of the number for future reference. Since I use the van daily for hauling goods and transportation, this number often comes in handy for repairs or handling traffic violations. Getting familiar with its location in advance saves a lot of hassle later.

Was this review help?
19
Share
Expand All
LaJuniper
12/01/2025, 03:24:27 AM

As someone who often helps neighbors check their cars, I can explain that the engine number of the Wuling Guang is stamped on the left front side of the engine block, near the vehicle's firewall. To find it, simply open the engine hood, crouch down, and look at the surface of the block where there are raised character markings. This number is used for vehicle certification, transfer, or maintenance checks. Ensure the engine is cool to prevent burns before operation, and use a light source if the area is dim. Keep the area clean to avoid misreading—it's a simple and quick process overall.

Was this review help?
18
Share
Expand All
DelKaden
01/21/2026, 09:58:26 PM

With years of experience in cars, I know utility vehicles like the Wuling Zhiguang inside out. Their engine numbers are permanently engraved on the left front area of the cylinder block, positioned close to the cabin firewall on a flat metal surface for easy visual identification. To locate it, open the hood and crouch down - the raised numbers are clearly visible from the driver's perspective. Regular cleaning of oil sludge improves readability. These numbers are crucial for accident handling or vehicle sales, and the maintenance can easily be done yourself.

Was this review help?
6
Share
Expand All
LeMila
04/17/2026, 10:05:17 PM

Driving a Wuling Zhiguang for deliveries, locating the engine number is a routine task. It is engraved on the left front cylinder block of the engine. After opening the hood, squat down and look from the driver's side towards that small flat surface. The location isn't complicated, but dust can accumulate sometimes—just wipe it clean with a damp cloth. Taking a photo for record-keeping makes it convenient for the DMV. Remember to turn off the engine and let it cool down before proceeding; the whole process takes just a couple of minutes.

Was this review help?
5
Share
Expand All
More Q&A

How to Jump Start a Vehicle?

The method to jump start a vehicle is: 1. Prepare two jumper cables and find a vehicle that can run normally; 2. Align the front parts of both vehicles, fix the jumper cables to the batteries, positive to positive, negative to negative; 3. Start the normal vehicle first, then start the vehicle being jump-started, and disconnect quickly after starting. The maintenance methods for vehicle batteries are: 1. Avoid parking the car in an open parking lot for a long time to prevent the battery from freezing and getting damaged; 2. The car engine is harder to start in winter, and each starting attempt should not exceed 5 seconds; 3. Start the car every once in a while to charge the battery in time; 4. Clean the battery terminals periodically and apply special grease to protect the wiring; 5. Do not use car electrical appliances after the engine is turned off.
109
Share

What kind of engine oil should be used for the Levin 1.2T?

Levin 1.2T should use 0W20 engine oil. The functions of engine oil are: 1. Lubrication to reduce wear; 2. Cooling and temperature reduction; 3. Shock absorption and buffering. Taking the 2019 Levin as an example, it belongs to the compact car category, with body dimensions of: length 4640mm, width 1780mm, height 1455mm, wheelbase of 2700mm, fuel tank capacity of 43L, and curb weight of 1410kg. The 2019 Levin features a MacPherson strut front suspension and an E-type multi-link rear suspension. It is equipped with a 1.8L naturally aspirated engine, producing a maximum horsepower of 98PS, maximum power of 72kW, and maximum torque of 142Nm, paired with a continuously variable transmission (CVT).
104
Share

Where are the drainage holes located on the Volkswagen Tiguan?

Volkswagen Tiguan's body drainage outlets are located on the front and rear wheel arches. Below is relevant information: 1. Drainage Holes: These drainage holes on the car are very inconspicuous, and many people may not even be aware of their existence. However, once these drainage holes become clogged, your beloved car may suffer from 'flooding.' In fact, maintaining these drainage holes is not difficult; simply cleaning debris and dust regularly during car washes is sufficient. 2. Poor Drainage: When the vehicle experiences poor drainage, it is necessary to determine which drainage hole or pipeline is causing the issue based on the location of the accumulated water. For example, if there are water stains near the interior ceiling or sunroof, it can be concluded that the problem likely stems from the sunroof. Once the drainage hole is identified, debris around the drainage outlet should be cleaned. For drainage outlets in areas such as doors, the engine compartment, or the fuel tank cap, hard objects like iron wires can be used to directly unclog them.
120
Share

Why is there a squeaking sound when the brake is lifted?

Here is the relevant introduction about the squeaking sound when the brake is lifted: 1. Normal brake noise for new cars: Generally, after running-in for more than 200 kilometers, the noise will disappear, so there is no need to worry. 2. Poor running-in: Replacing new friction pads or new brake discs, and the new brake discs cannot have a good running-in with the friction pads temporarily, which will cause noise. 3. Sand and gravel entering: Sometimes hard substances such as sand and gravel enter the gap between the brake disc and the brake pad, which will also cause noise. This usually occurs at the starting stage, and such noise can be ignored. Generally, after wading through water or driving on muddy roads off-road, hard sand and gravel will run into the gap of the braking mechanism, causing jamming when the braking system is working. When it runs into the gap of the brake disc, it will cause brake noise.
113
Share

How to Reset the Maintenance Light on the New Malibu?

The method to reset the maintenance light on the new Malibu is as follows: 1. Turn off the ignition switch; 2. Turn the ignition switch to the second position to keep the vehicle in a fully powered state; 3. Locate the menu button on the turn signal lever on the left side of the steering wheel and press it to enter the menu; 4. Hold the set button for more than 3 seconds; 5. Turn off the ignition switch to complete the maintenance light reset. Taking the 2021 Malibu as an example, it belongs to the midsize car category, with body dimensions of: length 4855mm, width 1854mm, height 1476mm, wheelbase 2737mm, fuel tank capacity 61l, and curb weight 1520kg. The 2021 Malibu is equipped with a 1.5l turbocharged engine, with a maximum horsepower of 170ps, maximum power of 125kw, maximum torque of 250nm, and is paired with a 6-speed automatic transmission.
106
Share

What does the Wuling Hongguang Commercial Version mean?

Commercial vehicles refer to vehicles that have been approved by the competent authorities by the end of the reporting period and are eligible for commercial operation. This includes vehicles that are technically sound, under repair, awaiting repair, long-term parked, or intended for scrapping but not yet approved by the superior authorities. However, it does not include non-commercial vehicles of the enterprise (such as wire-laying vehicles, oil tankers, trucks) or borrowed passenger vehicles. Generally, cars come in standard, low, mid, and high configurations, which respectively refer to: 1. Low configuration: Usually a simplified version, lacking features like leather seats, power windows, and many electronic control functions; 2. Standard configuration: Includes basic electric controls such as power windows, power steering, and air conditioning; 3. Mid configuration: Slightly more advanced than the standard, featuring all standard functions and possibly additional elements like airbags, sunroof, leather seats, power seats, and seat heating; 4. High configuration: The highest among these, often considered the flagship version of the model.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.