···
Log in / Register

Where is the engine number located on the Peugeot 508?

1Answers
VonAdrian
07/29/2025, 05:49:12 AM

Open the engine hood and remove the sound insulation plastic cover. The engine number is located on the left side of the cylinder block, behind the oil dipstick. It usually consists of a combination of 7 to 8 digits and letters. In addition to the above method, the engine number can also be viewed in the following 4 ways: The vehicle's driving license has the engine number printed on it, usually located on the second-to-last line; The motor vehicle registration certificate will state the engine number; The car purchase invoice will state the engine number; The vehicle purchase tax payment certificate will state the engine number. It should be noted that the engine number is not the same as the engine model. The engine model refers to the specification and size of the engine within the manufacturer, and engine models can be the same. The engine number refers to the production number of the engine, and each engine can only use one engine number, with each engine's number being unique.

Was this review help?
116
Share
More Q&A

What are the reasons why a Peugeot car won't start?

Peugeot car won't start for the following reasons: 1. Check if the battery voltage is too low: You can turn on the headlights and some electrical equipment to observe whether there are brightness changes in the dashboard and interior lighting during the starting process. If they noticeably dim, it indicates insufficient battery voltage. 2. Excessive intake pipe carbon deposits: Too much carbon buildup on components like the throttle valve and idle speed control valve prevents the engine's air-fuel mixture from reaching the required ratio, making the vehicle unable to start. This condition may also cause repeated engagement of the solenoid and starter relay, producing a clicking sound. 3. Insufficient fuel supply in the fuel system: This phenomenon is fundamentally similar to excessive intake pipe carbon deposits, as it also prevents the engine from achieving the required air-fuel mixture ratio, resulting in failure to start the vehicle.
105
Share

What are the length and width of the Mazda 3 Axela?

The length and width of the Mazda 3 Axela are: 4662mm and 1797mm. Taking the 2021 Mazda 3 Axela as an example, it belongs to the compact car category, with a body height of 1445mm, a wheelbase of 2726mm, and a fuel tank capacity of 50 liters. The 2021 Mazda 3 Axela features a MacPherson strut front suspension and a torsion beam rear suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 117 PS, a maximum power of 86 kW, and a maximum torque of 148 Nm, paired with a 6-speed manual transmission.
107
Share

Can a Car Inverter Boil Water?

It is possible to boil water with a car inverter as long as the power of the electric kettle does not exceed the inverter's power rating. A car inverter is a device that converts DC12V direct current into AC220V alternating current, similar to household electricity, allowing the use of common electrical appliances. It serves as a convenient power converter for vehicles. Precautions for using a car inverter include: 1. Place it in a safe location, especially away from children to prevent electric shock; 2. Disconnect the input power when not in use; 3. Avoid placing the inverter in direct sunlight or near heater outlets; 4. As the inverter generates heat during operation, do not place objects near or on top of it; 5. The inverter is sensitive to water, so avoid exposure to rain or splashing water.
113
Share

What is the reason for the ABS light being on after the annual vehicle inspection?

The reasons for the ABS light being on after the annual vehicle inspection: 1. There is air in the system pipeline; 2. System computer failure; 3. Vehicle speed sensor failure; 4. ABS wiring harness breakage; 5. Poor contact of the ABS relay. ABS is the anti-lock braking system. This light should briefly illuminate for a few seconds when starting up. If the system self-check is normal, it will automatically turn off. When driving, if the brake is quickly pressed to the bottom, the ABS will activate, and the light will turn on during activation. When the brake is released, the ABS will deactivate and the light will turn off. Method to eliminate the ABS light: Open the driver's side door of the car, pull the hood switch located on the left side of the driver's leg area, then lift up the car's engine hood. Use a support rod to prop up the car's engine hood, ensuring it is securely supported to avoid danger during operation. Finally, replenish the car's brake fluid to the MAX level.
107
Share

What is the oil specification for the Mazda CX-5?

Mazda CX-5 uses 5W40 engine oil. The Mazda CX-5 is positioned as a compact SUV with a body length, width, and height of 4555mm, 1842mm, and 1685mm respectively, and a wheelbase of 2700mm. It features front-wheel drive, with a front suspension using MacPherson independent suspension and a rear suspension using multi-link independent suspension. The Mazda CX-5 is equipped with a 2.0L naturally aspirated engine paired with a 6-speed automatic transmission. This engine delivers a maximum power of 114kW and a maximum torque of 200Nm. The engine also incorporates direct fuel injection technology and uses an aluminum alloy cylinder head and block.
117
Share

How to Troubleshoot the ESP System Yourself?

ESP system is an important system in a vehicle, typically supporting the functions of ABS and ASR. Below are the relevant solutions: 1. Constant Illumination: If the ESP indicator light stays on continuously, it indicates a system malfunction, requiring the owner to promptly visit a repair shop or 4S store for inspection and repair. Once the inspection and repair are completed successfully, the ESP indicator light will turn off. 2. Occasional Illumination While Driving: If the ESP indicator light occasionally lights up, it means the ESP system is functioning normally. The icon resembling a wheel slip pattern is a prompt that the traction control system is working, and occasional illumination is a normal phenomenon. The ESP system is essentially a type of traction control system. Compared to other traction control systems, ESP not only controls the drive wheels but also the driven wheels.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.