···
Log in / Register

Where is the drainage outlet of Chery Tiggo 3?

6Answers
DiCody
07/28/2025, 05:56:12 PM

The sunroof drainage outlets of Tiggo 3 are located at the four corners of the sunroof. Using the sunroof for defogging: Using the sunroof is a quick method for defogging. Especially during summer and autumn when there is more rain and higher humidity. Drivers know that if the side windows are tightly closed while driving, the temperature difference between the inside and outside of the car increases, making it easier for fog to form on the front windshield. The sunroof also has energy-saving benefits: On a hot summer day, if a car is left under the sun for an hour, the interior temperature can easily reach around 70 degrees Celsius. Most people immediately turn on the air conditioning to lower the temperature inside the car. However, simply opening the sunroof and utilizing the negative pressure formed on the roof while driving can quickly expel the hot air and achieve rapid ventilation and cooling.

Was this review help?
109
Share
LeCarter
08/11/2025, 09:26:48 PM

A few days ago, I dealt with the air conditioning drain outlet issue on my Chery Tiggo 3 myself. It's usually located under the center console near the front floor mat area, where a black rubber hose extends to drain condensation water from the AC system. That time, my car floor suddenly got soaked with a musty smell. After checking underneath, I found the outlet was clogged with dust and leaves. I used a thin wire to gently poke through the blockage, and now I inspect it quarterly to prevent water accumulation that could corrode wiring or cause mold. Related tips: Clogs happen more often during summer rainy seasons. After parking, listen for dripping sounds near the drain - no sound means immediate cleaning is needed, or repair costs will far exceed this simple maintenance. Beginners shouldn't worry - basic tools suffice, but always ensure the engine is off for safety.

Was this review help?
4
Share
Expand All
BethanyDella
09/30/2025, 11:08:44 PM

Having driven the Chery Tiggo 3 for several years, I'm quite familiar with its drainage outlet locations—the air conditioning drain tube is positioned slightly below the center of the chassis, near the heat shield beneath the front passenger footwell. Its purpose is to expel moisture generated by the evaporator. For maintenance, first wipe around the tube opening with a soft cloth, then use low-pressure compressed air to clear it. Avoid hard objects to prevent damaging the seal. The cooling system has another outlet at the bottom of the radiator in the engine bay, which rarely needs attention except during coolant replacement. Neglecting this routinely may lead to leaks into the cabin, damaging carpets or electronics. A handy tip: Rinse the outlet area during car washes to reduce clogging risks, and regularly inspect/clean the cabin air filter to help prolong system lifespan.

Was this review help?
19
Share
Expand All
Patrick
11/13/2025, 11:54:28 PM

Veteran drivers' experience tells you that the drainage outlet of the Chery Tiggo 3 is mainly located at the front under the car, and the air conditioning pipe outlet is designed under the dashboard on the chassis. If water appears under the passenger seat, it's likely clogged. Find a flat place to park, carefully jack up the car to check the pipe outlet for any foreign objects, and gently remove them. Regular maintenance can prevent problems, such as checking after washing the car. Safety tip: Don't push yourself if you're not sure, go to a professional shop if unclear, as water accumulation may cause short circuits or odors. Related point: The coolant outlet is at the engine radiator, but it's not recommended to tamper with it casually; usually, it's only handled when replacing the fluid. Small habits make big preventions, just remember.

Was this review help?
4
Share
Expand All
ReaganAnn
01/04/2026, 01:37:13 AM

As a new car owner, when I first got my Chery Tiggo 3, I figured out where the drain outlet is located—it's at the air conditioning drain pipe on the right side of the chassis center, just beneath the carpet where a small flexible tube extends. It's prone to clogging, which can cause water seepage on the floor, often mistaken for a sunroof leak. Cleaning method: Wipe external dust with a damp cloth, gently blow the pipe opening, and use a fine brush to clean the inner walls if necessary. Relevant advice: Check it every two months, especially during the rainy season; neglecting it can lead to dampness and bacterial growth. The drain outlet near the engine is at the bottom of the radiator and generally doesn’t need attention. Practical tip: Listen for dripping sounds under the chassis after driving to check if it’s normal, helping detect issues early and save on repairs. Keep it simple—newbie-friendly steps are best.

Was this review help?
15
Share
Expand All
MacGabriella
04/01/2026, 01:45:55 AM

For the maintenance of the drainage outlet on the Chery Tiggo 3, the air conditioning pipe outlet is located at the lower end of the front apron area under the car, with a small plastic head on the chassis responsible for drainage. I clean it regularly to prevent water overflow inside the car from damaging electronic devices due to blockage. Method: After parking, check if the pipe outlet area is dry. If there are water traces, use a soft hose to flush with water or low-pressure air to clear it. Related extension: Replace the cabin air filter every six months to reduce the source of dust. The engine cooling system's drainage outlet is under the radiator, which only requires attention when changing the coolant. Key point: If this issue is not addressed, it may escalate into a larger malfunction. Developing this habit can save you trouble. Simple operations can improve the air quality inside the car and incidentally extend the vehicle's lifespan.

Was this review help?
20
Share
Expand All
More Q&A

How to Open the Fuel Tank Cap of a Honda Fit?

Method to open the fuel tank cap of a Honda Fit: For the oldest model, the fuel tank cap is located on the left side of the driver's seat. The previous generation Fit does not have a separate switch for the fuel tank cap; simply press it to pop open. For the newer models, the fuel tank cap switch is positioned near the left footrest—just pull it to open. Additional information is as follows: 1. Comprehensive fuel consumption test for the Honda Fit on car websites: The average fuel consumption for the 1.3L CVT is 7.4L/100km, 1.3L automatic averages 7.7L/100km, 1.3L manual averages 7.0L/100km, 1.5L semi-automatic averages 8.4L/100km, 1.5L CVT averages 7.6L/100km, 1.5L automatic averages 8.6L/100km, and 1.5L manual averages 7.7L/100km. 2. Power specifications of the Guangzhou Honda Fit: The Guangzhou Honda Fit is equipped with a Honda 1.5L VTEC engine. This engine is designed to be lighter and more compact than previous models, with a smaller valve angle, achieving a more compact combustion chamber for faster combustion. It reduces friction among moving parts, significantly improving engine efficiency. The maximum output power is 88kW/6600rpm, with a torque of 145Nm/4800rpm.
102
Share

What does the car LOR mean?

These are three markings: L, O, and R. They are the adjustment switches for the rearview mirror, used to adjust the rearview mirror. Turning to L adjusts the left rearview mirror, O turns it off, and R adjusts the right rearview mirror. The car rearview mirror reflects the situation behind, beside, and below the car, allowing the driver to indirectly see these areas clearly, thereby expanding the driver's field of vision. Additional information: 1. Installing rearview mirrors: Each vehicle should have a rearview mirror installed on the left and right sides inside the car, with their position and angle adapted to the vehicle model. 2. Before starting the car: The driver must observe through the rearview mirror whether there are vehicles approaching from the side or rear and other traffic conditions behind, in order to make quick and accurate judgments and decisions. Starting blindly may lead to collisions. 3. Driving on multi-lane roads: When changing lanes frequently, drivers should always accurately observe the traffic conditions behind and to the side through the rearview mirror. If there is a vehicle approaching from behind, do not change lanes. If a vehicle from the side or rear is overtaking you, temporarily refrain from overtaking the vehicle in front.
102
Share

Is there a difference between setting the car air conditioner to level 1 and level 4?

There is a difference between setting the car air conditioner to level 1 and level 4. The specific differences are as follows: 1. Fuel consumption: It will increase fuel consumption, but not significantly. This is because the compressor is driven by the engine belt, and its speed is only related to the engine. However, lowering or raising the level only changes the speed of the blower fan inside the car. A higher fan speed consumes more electricity, and the car's electricity can only be generated by consuming gasoline. 2. Power: Generally, the power of a car air conditioner's compressor is not adjustable; it only has two states: on or off. Setting the air conditioner to level 4 will feel cooler than level 1, but this is only due to the difference in heat exchange efficiency, not because the compressor works at a higher power at level 4 compared to level 1.
119
Share

What is the use of the car's external circulation mode?

External circulation mode is used in the following situations: 1. When you first buy a new car, turning on this mode helps quickly eliminate harmful gases and odors inside the vehicle. 2. During cooling, sometimes this mode needs to be activated to rapidly circulate air between the interior and exterior, serving as a ventilation and filtration function. 3. On rainy days, it enables quick ventilation without allowing rainwater to enter the car, and also helps eliminate window fogging. Here is a brief introduction about external circulation: (1) External circulation mode refers to the car's air conditioning system opening to allow airflow with the outside air, absorbing external air for circulation. (2) The disadvantage of external circulation mode is that when harmful gases enter the vehicle, they can cause harm to the health of the driver and passengers.
108
Share

How many colors does the Changan Yuexiang have?

Changan Yuexiang offers 9 color options, which are: Sparkling Galaxy Silver Gray, Sparkling Warm Blue, Sparkling Ice Blue, Sparkling Dream Blue Gray, Sparkling Orchid Purple, Sparkling Pearl White, Sparkling Coffee Golden, Emperor Black, and French Red. Additional relevant details are as follows: 1. The latest Changan Yuexiang has a body size of 4390mm in length, 1725mm in width, and 1490mm in height, with a wheelbase of 2535mm and a fuel tank capacity of 40 liters. 2. The latest Changan Yuexiang is equipped with a 1.4L naturally aspirated engine, delivering a maximum power of 74kW and a maximum torque of 135Nm, paired with a 5-speed manual transmission.
107
Share

How Long Does It Take to Charge a Motorcycle at Idle Speed?

It takes approximately 8-10 hours to charge a motorcycle battery at idle speed. When the motorcycle engine is running, it can charge the motorcycle battery. If the battery is in good condition, the charging time may be shorter. Here is a brief introduction to motorcycle charging: (1) Generally, there is no need to start the engine separately to charge the motorcycle battery. If the battery is in good condition, the generator can automatically charge the battery while riding the motorcycle. (2) The method of charging the battery depends on the type of engine. For a water-cooled engine, the charging time can be appropriately extended. For an air-cooled engine, it is recommended to control the charging time.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.