···
Log in / Register

Where is the cigarette lighter fuse of Tiggo 8 located?

6Answers
SanRhett
07/29/2025, 03:36:56 AM

The cigarette lighter fuse of Tiggo 8 is located in the fuse box behind the left lower side panel of the instrument panel. The fuse box must be kept clean and protected from moisture when opened. Do not use a fuse with a rated current value higher than the specified value, as this may damage other components of the electrical system. Precautions for using fuses are as follows: 1. The color and markings of the replaced fuse must be exactly the same as those of the original fuse. 2. Do not use metal sheets, paper clips, etc. to replace the fuse. 3. The electrical box must be kept clean and protected from moisture. 4. All electrical equipment must be turned off before replacing the fuse.

Was this review help?
102
Share
VanMaddox
08/12/2025, 09:34:38 PM

As a seasoned driver of the Chery Tiggo 8, I've encountered the cigarette lighter malfunction issue several times. The fuse is usually located in the fuse box under the driver's seat or on the left side of the steering wheel. You'll need to open the small cover and refer to the diagram to find the exact position. The fuse number for the cigarette lighter typically ranges between 20 and 30. When the fuse blows, the cigarette lighter loses power completely, so you'll need to replace it promptly. For safety, turn off the engine and remove the key before replacing. Use small tweezers or your fingers to gently remove the old fuse and insert a new one of the matching specification (usually 15A or 20A). If fuses keep blowing frequently, it might indicate an overload or short circuit in the cigarette lighter. Don't just replace it with a higher-rated fuse as a quick fix – instead, check for foreign objects or short-circuit issues inside the cigarette lighter socket. For routine maintenance, I recommend regularly checking the fuse condition, especially before long trips to avoid roadside inconveniences. DIY replacement on the Tiggo 8 is quite straightforward, but it's best to consult the manual for more precise information.

Was this review help?
4
Share
Expand All
SanAurora
10/04/2025, 04:05:39 AM

As a new car owner, I panicked when my cigarette lighter suddenly stopped working last time. Later, I discovered that the fuse is located in a small box on the driver's side floor. Specific location: Bend down and look near the pedals, there's a plastic cover. Pry it open to see a row of fuses, then look for the cigarette lighter symbol or number (it may be No. 20 or 25 depending on the car model). Just gently pull it out and replace it with a new one—you can buy a matching one at the supermarket. If the cigarette lighter isn't working, don’t randomly check other parts first; inspecting the fuse should be your first step. When replacing it, make sure the car key is turned off to prevent short-circuit risks. Additionally, cigarette lighters often burn out due to overloading from plugging in too many charging devices. My advice is to use only one charging head at a time to avoid issues. Learning this trick has saved me many trips to the repair shop.

Was this review help?
9
Share
Expand All
VonCayden
11/17/2025, 09:53:08 PM

From a technical perspective, the cigarette lighter fuse of the Tiggo 8 is located in the cabin fuse box, near the driver's left foot area. After opening the cover, refer to the diagram to locate the specified number (assuming No. 30), then use a tool to remove the blown fuse and replace it with a standard 15A model. Ensure the vehicle is turned off before operation to prevent short circuits. If the issue recurs, check for potential short circuits in the cigarette lighter socket or aging wiring. Regularly avoid moisture to prolong the fuse's lifespan.

Was this review help?
18
Share
Expand All
SanEmery
01/07/2026, 11:29:40 PM

The failure of the cigarette lighter while driving the Tiggo 8 is concerning as it involves electrical safety during operation. The fuse location is easy to find—just lift the cover of the concealed compartment under the lower left corner of the steering wheel, then locate the corresponding fuse number (e.g., F25) for the cigarette lighter as indicated in the diagram. First, check if the fuse is blown before replacing it with a matching one. Always remember to stop the engine and turn off the ignition for safety. Overloading the cigarette lighter often stems from using incompatible devices. I recommend regularly cleaning the cigarette lighter socket to prevent this issue.

Was this review help?
12
Share
Expand All
IslaDella
04/04/2026, 10:10:30 PM

My family's Tiggo 8 commonly uses the cigarette lighter for charging. Once when it stopped working, I found the fuse in a small box under the lower left corner of the dashboard. After opening it, I used the label to identify the cigarette lighter fuse as F22 and replaced it with a new one to solve the issue. The replacement steps are simple: first turn off the engine, then use tweezers to remove and insert the fuse, but it's important to prevent overload by not plugging in too many devices—use only one at a time. In daily maintenance, checking the fuse box once a month can extend its lifespan and maintain driving convenience.

Was this review help?
5
Share
Expand All
More Q&A

What does SAT mean in Geely cars?

In automatic transmissions, SAT stands for the Sport mode of the automatic gearbox. Usage of Sport mode: In this mode, the engine will not immediately shift up after the RPM increases. The gear shift will only complete when the engine torque is sufficiently high, ensuring greater torque output and faster acceleration. For example, in Eco mode the transmission may shift to second gear at 1200 RPM, but in this mode it will shift at 1500 RPM. The power performance is stronger but fuel consumption will increase accordingly. Automatic transmission modes: Automatic mode (D gear): The vehicle will automatically shift gears based on speed and RPM. Sport mode (S gear): The system will shift gears automatically, with more powerful performance than in automatic mode. Manual mode: When in S gear, using '+' or '-' to shift up or down will engage manual mode, which can simulate 8 gear positions.
106
Share

What to Do If a Beginner Driver Frequently Stalls the Car?

The main reason for stalling lies in the beginner's lack of proficiency in controlling the car's clutch, resulting in uncoordinated operation between the clutch and accelerator. Methods to avoid stalling are as follows: 1. Control the clutch properly: When starting, mastering the clutch is key to avoiding stalling. Beginners often struggle with clutch control, especially in manual transmission cars. If the clutch is released too slowly, the car is prone to stalling. Therefore, when starting, press the clutch firmly with your left foot, hold it steady when halfway released, and then gradually release it as the car begins to move. 2. Apply the accelerator: While controlling the clutch, applying the accelerator is equally important. Simply releasing the clutch will make the car move slowly, and failing to apply the accelerator can also lead to stalling. Therefore, gently press the accelerator while releasing the clutch to ensure a smoother start. 3. Use the handbrake in coordination: Sometimes, beginners may experience the car rolling backward when starting, which can cause panic and lead to stalling. In such cases, use the handbrake in coordination. Before shifting into gear to start, pull the handbrake tight, release the clutch halfway, then release the handbrake and apply the accelerator to prevent rolling backward. 4. Avoid driving at high gear with low speed: During normal driving, if the car is in a high gear but moving at low speed, the engine will gradually start to shake, and the power will become insufficient, making stalling likely. Therefore, beginners should learn the right timing for gear shifting.
114
Share

Why Can't the Rear Windows of Mercedes-Benz Be Rolled Down?

There are reasons why Mercedes-Benz windows cannot be rolled down. Internal factors of the window regulator: The oil inside the door's window regulator has been depleted, and the inner cover should be removed to add oil. Solutions: If the issue is with oiling the internal mechanism, first remove the inner cover. Remove the hidden screws and disassemble the quick-action switch. If that doesn't work, peel off the waterproof plastic sheet below to expose the window's lifting mechanism. If the problem lies with the window switch, then the only solution is to visit a 4S shop to apply for a replacement of the new window switch. Regularly oil the internal mechanism of the window, and clean internal stains, dust, and other impurities to avoid affecting the window's operation.
114
Share

Does Replacing the Engine Wiring Harness Require Removing the Engine?

Replacing the engine wiring harness does not require removing the engine. Here are some relevant details about the engine: 1. Function: An engine is a machine that converts other forms of energy into mechanical energy, including internal combustion engines (such as gasoline engines), external combustion engines (such as Stirling engines and steam engines), and electric motors. 2. Mechanical Device: Internal combustion engines typically convert chemical energy into mechanical energy. The term 'engine' can refer to both the power-generating device and the entire machine that includes the power unit. The engine was first developed in the UK, so the concept of the engine originates from English, with its original meaning referring to a 'mechanical device that generates power.'
107
Share

Where can I check the car battery level?

The method to check the car battery level is: The car dashboard cannot display the battery level, and the battery status can only be determined through the battery inspection eye. By observing the different colors of the battery inspection eye, you can assess the battery's condition. Relevant precautions for battery usage are as follows: 1. Regular inspection: First, ensure the battery is securely installed. Frequently check if the battery connecting wires and plugs are loose, and tighten them if necessary. 2. Starting time limit: Each vehicle start should not exceed 5 seconds. If a second consecutive start is needed, ensure there is a 10-15 second interval in between. 3. Proper usage: After turning off the engine, it is advisable to minimize listening to music and avoid turning on the headlights.
114
Share

What is the fuel consumption of the Haval H6 upgraded version?

Haval H6 upgraded version consumes only 4.9L per 100 kilometers. Driving habits: Some drivers have a slower temperament, drive slowly, start leisurely, accelerate gently, maintain a steady speed, and brake gradually. With such driving habits, fuel consumption is estimated to be not too high. Some people have a more impatient temperament, eager to burn rubber at traffic lights, overtake every car on the road, and frequently brake abruptly. With such driving habits, fuel consumption will not be low. Transmission: Here, the transmission refers to the automatic transmission. The engine and transmission form the simplest power output system, so the structure of the transmission also directly affects fuel consumption. Reducing fuel consumption: Try to maintain regular maintenance to keep the engine in good condition, and avoid carrying unnecessary items in the car. Use the correct gear as much as possible, release the throttle in advance when approaching traffic lights, anticipate road conditions ahead to reduce unnecessary braking and sudden acceleration, and avoid traveling during peak traffic hours. All these measures help to reduce fuel consumption.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.