···
Log in / Register

Where is the cigarette lighter fuse located in the Chevrolet Sail?

6Answers
DelWalker
07/28/2025, 10:00:46 AM

The cigarette lighter fuse in the Chevrolet Sail is located in the storage compartment above the hood release handle on the left side of the steering wheel. Taking the 2013 Chevrolet Sail as an example, it is a compact car with the following dimensions: length 4249mm, width 1690mm, height 1503mm, wheelbase 2465mm, fuel tank capacity 42L, trunk capacity 370L, and curb weight 1040kg. The 2013 Chevrolet Sail is equipped with a 1.2L naturally aspirated engine, delivering a maximum horsepower of 87PS, maximum power of 64kW, maximum torque of 115Nm, and paired with a 5-speed manual transmission.

Was this review help?
116
Share
VanLuna
08/11/2025, 02:34:28 PM

I've been driving my Chevrolet Sail for almost ten years, and the location of the cigarette lighter fuse is actually quite common. It's usually on the left side of the dashboard below the steering wheel, near the driver's left foot. You'll need to squat down or lean over to see it—there's a small rectangular plastic cover that can be easily popped open, revealing a row of fuses inside. When looking for the fuse, refer to the diagram or labels on the cover, which typically indicate 'cigarette lighter,' 'cig lighter,' or similar wording. The fuse is often located in the middle-lower positions and is usually rated at 10A or 15A. If it blows, the cigarette lighter will stop working, often due to a short circuit in the car charger or overuse. You can test it with a multimeter or pull it out to check if the thin wire inside is broken. If it's blown, just replace it with a new fuse—don't force it, as this could cause bigger issues. I recommend checking it regularly, especially before long trips, to prevent unexpected problems.

Was this review help?
4
Share
Expand All
OJordan
09/28/2025, 10:50:44 PM

As a frequent road-tripper driving a Chevrolet Sail, let me guide you to its cigarette lighter fuse location. Tucked beneath the dashboard near the steering wheel, specifically inside the side panel by the driver's footwell, you'll need to reach down and feel for a slightly recessed cover—just give it a firm push to open. The fuse box inside may look intimidating with its dense layout, but stay calm. Look for labels marked 'AUX power' or 'cig'—that's your cigarette lighter fuse, typically positioned in the second row towards the right. Wear gloves during inspection to prevent minor mishaps; a blown fuse will show blackened filament marks. Replacement is straightforward: use tweezers to remove the old fuse and snap the new one into place. While this task isn't complicated, if the lighter still doesn't work, check for loose wiring. Avoiding cheap chargers in daily use can extend fuse lifespan. Memorizing this spot could save you hefty repair bills.

Was this review help?
11
Share
Expand All
Sousa
11/11/2025, 11:46:15 PM

I've been using the Sail for commuting for quite a while. The cigarette lighter fuse is located under the dashboard inside the car, in that small cover to the left of the steering wheel. Open the cover, the fuse positions are usually labeled, just find the 15A cig lighter blade fuse. If it's not working, pull it out to check if it's blown.

Was this review help?
14
Share
Expand All
AnnieDella
01/02/2026, 01:29:01 AM

If you're looking for the location of the Sail cigarette lighter fuse, I've checked some information and it's usually fixed in the fuse box under the driver's seat. Open that cover with the diagram, and the cigarette lighter fuse is often located near the middle row, labeled as 'cig lighter' or a similar icon, with a rating of around 15A. When it blows, the cigarette lighter stops working, possibly due to a short circuit or overload in the device; it's best to keep a spare fuse for emergencies, but make sure not to install it in the wrong position to avoid a short circuit. Other similar places in the car, like the engine compartment box, might be confusing, but this one is definitely inside the car.

Was this review help?
2
Share
Expand All
StephenLee
03/30/2026, 02:26:22 AM

As someone who loves car maintenance, I'm very familiar with the cigarette lighter fuse of the Chevrolet Sail. It's located under a small cover on the driver's side dashboard. You need to lift that plastic panel to reveal neatly arranged fuses inside. The cigarette lighter fuse is usually positioned at the edge of the fuse box and clearly labeled. When checking, pay attention to whether the fuse is blown - if it's burned out, replace it with one of the same amperage. Don't delay this, because a faulty cigarette lighter might affect emergency equipment like chargers. To prevent this issue, avoid plugging in high-power devices regularly. Replacing a fuse only takes a few minutes - it's safe and hassle-free.

Was this review help?
5
Share
Expand All
More Q&A

Can Dish Soap Be Added to Car Windshield Washer Fluid?

Car windshield washer fluid should not be mixed with dish soap; it is recommended to purchase high-quality windshield washer fluid for use. Household dish soap is an alkaline substance. If used as windshield washer fluid, it may cause rubber components to harden and could potentially corrode the washer fluid reservoir and tubing. Additionally, tap water used for dilution contains impurities, which can cause significant issues with prolonged use. Steps for adding windshield washer fluid: Open the front hood—the release lever is located under the dashboard in front of the driver's seat. Gently pull it to open the hood. Locate the washer fluid reservoir: It is usually positioned on the right side of the engine bay, with a cap marked by an indicator-like symbol. Open the cap and add the washer fluid: The reservoir has a dipstick—pay attention to the markings while filling to avoid overfilling and unnecessary spillage. Choosing windshield washer fluid: Washer fluids are generally categorized into antifreeze and all-season types. As long as temperatures remain above freezing, all-season fluid can be used. However, during winter, it is essential to switch to antifreeze washer fluid to prevent the reservoir from cracking due to freezing expansion and to ensure the fluid can be sprayed properly for timely windshield cleaning. Additionally, antifreeze washer fluid helps accelerate the melting of ice and snow.
101
Share

Is it necessary to turn on lane keeping?

Lane keeping is necessary to turn on because after the vehicle activates the lane keeping system, the corresponding icon will be displayed on the dashboard during normal driving. Once the vehicle deviates from its original track, the indicator light on the dashboard will light up, which is helpful for driving safety. The working principle of the lane keeping system is to use a camera to identify the lane markings. If the vehicle deviates from the current lane without turning on the turn signal, it will definitely be alerted. However, if the turn signal is on, there will be no warning. In addition, this system is specifically designed for vehicles driving on highways or well-conditioned rural roads, and it only starts working when the speed exceeds 65 km/h. The function of the lane keeping assist system: The lane keeping assist system helps avoid collisions caused by unintentional lane departure. If the vehicle approaches the detected lane line but does not use the turn signal in the corresponding direction, the steering wheel can be slowly turned for assistance. If the lane line is crossed, a lane departure warning may also be issued. If the lane keeping assist system detects that the driver is actively steering, it will not assist or issue a lane departure warning.
106
Share

What to Do When Locked Inside a Car?

What to Do When Locked Inside a Car? Solutions are as follows: 1. If you have a key: You can use the key or a spare key to solve the problem. When purchasing a vehicle, the original keys that come with the car are generally no fewer than two. If the commonly used key is accidentally locked inside the car, try to retrieve the spare key, as this is the simplest and least costly method. 2. If you don't have a key: You can open the trunk switch to escape. If the trunk switch cannot be found, you can seek help from a 4S shop. 3. Call the police: The police can help find a legitimate locksmith company, which significantly reduces expenses and provides a sense of security, preventing fraud and extortion by unscrupulous locksmith companies. 4. Hire a locksmith company: Documents required when hiring a locksmith company include ID card, passport or household registration, and vehicle license.
116
Share

How Long Does It Take to Replace a Driver's License?

If all requirements are met, the vehicle management office should reissue the motor vehicle driver's license within one day. Important notes for replacing a driver's license include: 1. Replacement locations: It can be processed at the vehicle management office, traffic police detachment, or driver's license service points, and can also be handled in a different location. Non-local individuals can go to the overseas management window of the vehicle management office. 2. Required documents: Application form for motor vehicle driver's license, lost certificate of motor vehicle driver's license, original and photocopy of ID card (only the photocopy is collected, the original is for verification), and two 1-inch photos. 3. Before applying for a replacement, ensure that: You have not accumulated 12 penalty points in a single scoring cycle; all traffic violation records have been properly handled, with no unpaid tickets.
106
Share

What is the recommended tire pressure in kPa for cars?

Standard tires: 2.4-2.5 bar. Reinforced tires: 2.8-2.9 bar. Maximum pressure: should not exceed 3.5 bar. Methods of tire pressure monitoring: 1. Direct tire pressure monitoring: Direct tire pressure monitoring devices use pressure sensors installed in each tire to directly measure tire pressure, transmitting pressure information from inside the tire to a central receiver module via wireless transmitters, then displaying the pressure data for each tire. The system automatically alerts when tire pressure is too low or there's a leak. 2. Indirect tire pressure monitoring: The working principle of indirect tire pressure monitoring is: when a tire's pressure decreases, the vehicle's weight causes that wheel's rolling radius to become smaller, making it rotate faster than other wheels. By comparing rotational speed differences between tires, it monitors tire pressure. Indirect tire pressure alert systems essentially rely on calculating tire rolling radius to monitor pressure.
114
Share

Why is the engine malfunction indicator light on?

There are various reasons that can cause the engine malfunction indicator light to illuminate: sensor malfunctions, spark plug issues, ignition coil problems, fuel pump failures, fuel line blockages, etc. When the engine malfunction light comes on, it can be categorized into three scenarios, each requiring a different response: 1. The car cannot start: This may be caused by a fuel pump or ignition component failure, and repair is recommended. 2. The malfunction light is on, but there are no noticeable abnormalities while driving: This might just be a sensor malfunction, and you can continue driving temporarily, but it's best to drive at low to medium speeds. 3. The engine malfunction light is on, and the vehicle can still be driven, but exhibits severe shaking, lack of acceleration power, etc.: In this case, you should not continue driving.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.