···
Log in / Register

Where is the cabin air filter of BYD S7 located?

6Answers
McEvelyn
07/29/2025, 05:33:17 AM

The cabin air filter of BYD S7 is located behind the glove box on the passenger side. The functions of the cabin air filter are: 1. To provide fresh air; 2. To absorb harmful substances; 3. To filter solid impurities. Taking the 2017 BYD S7 as an example, it is a mid-size SUV with a body size of 4835mm in length, 1855mm in width, and 1720mm in height, with a wheelbase of 2730mm. The 2017 BYD S7 is equipped with a MacPherson independent front suspension and a multi-link independent rear suspension, powered by a 1.5T turbocharged engine with a maximum horsepower of 154PS, a maximum torque of 240Nm, and a maximum power of 113kW, paired with a 6-speed manual transmission.

Was this review help?
119
Share
LaAthena
08/12/2025, 06:25:17 AM

I know the location of the BYD S7's cabin air filter very well because I've driven this car for several years. It's hidden inside the glove compartment in front of the front passenger seat. After opening the glove box, you'll find a cover or clips inside—just gently push or unscrew it to remove. Once removed, you'll see the cabin air filter housing right at the air duct inlet. Replacing it is quite simple; you can do it yourself, and buying a filter online costs just a few dozen yuan. Remember to replace it regularly—I usually do it every 10,000 km or once a year. Otherwise, accumulated dust can clog the vents, leading to strange odors when using the AC in summer, which affects driving comfort. Here’s a little tip: Before replacing, clean up any debris around the glove box to avoid dust falling in and dirtying the area. Don’t delay too long—keeping the air fresh is good for your health too.

Was this review help?
19
Share
Expand All
StAlexander
10/06/2025, 02:25:31 AM

When it comes to the location of the BYD S7's cabin air filter, I must remind you that it's located behind the glove compartment on the passenger side. As an experienced car enthusiast, I know this design prioritizes user accessibility. Specifically, open the glove box, remove the inner trim panel, and you'll find the filter housing. The placement is quite reasonable without interfering with other components. During replacement, it's advisable to wear gloves and gently push the new filter into place without excessive force to avoid damaging the clips. The filter's primary function is to trap dust and pollen from incoming air – delayed replacement can degrade cabin air quality, with some users reporting allergy symptoms or persistent odors. Personally, I inspect mine every six months and recommend developing this routine habit. This practice not only enhances driving comfort but also saves money by avoiding dealership maintenance visits.

Was this review help?
13
Share
Expand All
MirandaAnn
11/19/2025, 02:53:03 AM

Every time I perform minor maintenance on my car, I check the cabin air filter. In the BYD S7, it's hidden inside the glove compartment in front of the passenger seat. Just open the compartment, and you'll find a plastic cover on the rear wall—lift it, and there it is. Replacing it is effortless; you can do it yourself in just a few minutes, saving the hassle and expense of visiting a repair shop. Regularly changing the filter is crucial; otherwise, airflow becomes restricted, reducing AC efficiency and increasing fuel consumption. I usually replace it once a year or whenever I notice odd smells—simple, practical, and it helps extend the AC system's lifespan.

Was this review help?
11
Share
Expand All
Winifred
01/09/2026, 09:41:33 PM

The location of the BYD S7's cabin air filter is crucial as it directly impacts the air quality inside the vehicle. Positioned behind the glove compartment on the passenger side, simply open it and gently remove the inner panel to access the filter. I place great importance on this, as regular replacement prevents bacterial growth and respiratory issues. A dirty filter not only reduces airflow but can also blow out dust, posing health risks, especially when children are passengers. I personally inspect it every 8,000 kilometers or so—replacement is straightforward and requires no tools. Additionally, I strongly recommend installing a new filter before summer to ensure a cool and comfortable driving environment. It's cost-effective and provides peace of mind, so don't skip this maintenance step.

Was this review help?
2
Share
Expand All
DeBella
04/06/2026, 02:30:53 AM

I'm familiar with changing the air filter for the BYD S7. It's located inside the glove box on the passenger side, and you can see it after removing the rear cover. I've done it myself several times—it's economical: the filter is cheap to buy online, and DIY saves labor costs. Be careful not to break the plastic clips during the process. Regularly replacing it has many benefits—a clogged filter increases the air conditioning load and raises power consumption. I usually check it when seasons change, maintaining the car while saving costs. Remember the location—the filter box is clearly visible.

Was this review help?
15
Share
Expand All
More Q&A

Is it illegal to hang a national flag on a car?

Hanging a national flag on a car is not illegal, but you must choose a standard and compliant flag and ensure it does not affect your own or others' normal driving. The reasons are as follows: 1. Article 13, Paragraph 3 of the Implementation Regulations of the Road Traffic Safety Law stipulates: 'The spraying or pasting of logos or advertisements on motor vehicles must not affect safe driving.' Therefore, when hanging a national flag or affixing a flag-style sticker on a private car, the owner must select a standard and compliant flag and ensure it does not interfere with normal driving. 2. Articles 17 and 19 of the National Flag Law clearly state: 'Damaged, soiled, faded, or non-compliant flags must not be hoisted,' and 'the national flag and its design must not be used as trademarks or advertisements or for private funeral activities.'
108
Share

What is the meaning of automotive OBD?

Automotive OBD stands for On-Board Diagnostics. Here is relevant information: 1. This system continuously monitors the operating conditions of the engine and the working status of the exhaust after-treatment system. Once it detects conditions that may cause excessive emissions, it will immediately issue a warning. 2. The On-Board Diagnostics system can also detect the working conditions of the engine's electronic control system and other functional modules of the vehicle during operation. When a fault occurs in the system, the Malfunction Indicator Lamp (MIL) or Check Engine warning light will illuminate. Meanwhile, the OBD system will store the fault information in memory, and relevant information can be read in the form of fault codes through standard diagnostic instruments and diagnostic interfaces.
103
Share

Which Toyota models are equipped with VVT-i engines?

Toyota Crown and Reiz, among others, are equipped with VVT-i engines. Below is a detailed introduction about automobile engines: 1. Overview: An automobile engine is a device that provides power to a vehicle, determining its power, fuel efficiency, stability, and environmental friendliness. Depending on the power source, automobile engines can be categorized into diesel engines, gasoline engines, electric vehicle motors, and hybrid systems. 2. Others: Common gasoline and diesel engines are both types of reciprocating piston internal combustion engines, capable of converting the chemical energy of fuel into the mechanical energy of piston motion and outputting power. Gasoline engines have high rotational speeds, are lightweight, produce less noise, are easy to start, and have lower manufacturing costs. Diesel engines have higher compression ratios, better thermal efficiency, and superior fuel economy and emission performance compared to gasoline engines.
102
Share

What lights to use when driving straight through an intersection in Subject 3?

When driving straight through an intersection in Subject 3, you should use low beam headlights; when turning left, right, or making a U-turn at an intersection, use turn signals and low beam headlights. Subject 3, which includes the road driving skills test and the safe and civilized driving knowledge test, is part of the motor vehicle driver's license assessment and is the abbreviated name for the road driving skills and safe and civilized driving knowledge test subjects in the motor vehicle driver's examination. When driving straight through an intersection at night in Subject 3, alternate between high and low beam headlights at least twice. Subject 3 test items: preparation for getting on the car, starting, driving straight, changing lanes, passing through intersections, parking by the roadside, passing through pedestrian crossings, passing through school zones, passing through bus stations, meeting vehicles, overtaking, making U-turns, and driving at night. Simulated lighting operation items: Passing sharp curves and slopes at night: alternate between high and low beam headlights; Passing slopes and arched bridges at night: alternate between high and low beam headlights; Passing sharp curves and arched bridges at night: alternate between high and low beam headlights; Passing arched bridges and pedestrian crossings at night: alternate between high and low beam headlights; Passing intersections without traffic signals at night: alternate between high and low beam headlights; Overtaking vehicles ahead at night: alternate between high and low beam headlights; Please turn on the low beam headlights: low beam headlights; Meeting non-motorized vehicles on narrow roads at night: low beam headlights; Following vehicles closely in the same direction at night: low beam headlights; Driving on roads with streetlights at night: low beam headlights; Meeting non-motorized vehicles on narrow bridges at night: low beam headlights; Driving on well-lit roads at night: low beam headlights; Driving straight through intersections at night: low beam headlights; Meeting motor vehicles at night: low beam headlights; Turning left at intersections at night: low beam headlights + turn signals; Turning right at intersections at night: low beam headlights + turn signals; Driving without streetlights or under poor lighting conditions at night: high beam headlights; Please turn on the high beam headlights: high beam headlights; Temporary parking by the roadside: position lights + hazard warning lights; Vehicle breakdown on the road at night, obstructing traffic and difficult to move: position lights + hazard warning lights; Driving in foggy conditions: fog lights + hazard warning lights.
106
Share

What is the detailed explanation of BYD Han's lifetime warranty for the three electric systems?

Detailed explanation of BYD Han's lifetime warranty for the three electric systems: The exclusions of the lifetime warranty involve repairs not performed at BYD-authorized service centers in case of accidents, or damage to components related to the three electric systems caused by human or accidental collisions, water immersion, fire, etc. In other words, if the vehicle is involved in an accident, as long as the repairs are carried out at a BYD-authorized service center and the accident does not result in damage to components related to the three electric systems, the lifetime warranty can still be enjoyed. The BYD Han is a mid-to-large-sized sedan with body dimensions of 4950mm in length, 1890mm in width, and 1490mm in height.
105
Share

What Does Motion Detection Mean in a Dash Cam?

Motion detection in a dash cam refers to the feature where the device automatically starts recording only when there is movement within its field of view, otherwise it stops recording to save storage space. The principle and application of motion detection are as follows: Principle of Motion Detection: The images captured by the camera at different frame rates are processed and compared by the CPU using a specific algorithm. When there is a change in the scene, such as a person walking by or the camera being moved, the calculated comparison result exceeds a threshold, prompting the system to automatically take appropriate action. Application of Motion Detection: The motion detection function in dash cams is commonly used for parking surveillance, effectively preventing incidents like scratches. However, since motion detection requires power consumption, it usually requires a separate power source.
119
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.