···
Log in / Register

Where is the cabin air filter located in the Haval H3?

6Answers
MacValeria
07/29/2025, 10:53:47 AM

The cabin air filter in the Haval H3 is located on the inner side of the glove compartment. The cabin air filter is a component installed in the vehicle's air conditioning system that absorbs dust particles, alleviates respiratory discomfort, reduces irritation for allergy sufferers, and protects the air conditioning cooling system. The Haval H3 is a compact SUV under the Haval brand, with dimensions of 4620mm in length, 1800mm in width, and 1810mm in height, and a wheelbase of 2700mm. In terms of powertrain, the Haval H3 is equipped with four engine options: a 2.0L naturally aspirated engine, a 2.4L naturally aspirated engine, a 2.5L turbocharged engine, and a 2.8L turbocharged engine.

Was this review help?
105
Share
Jim
08/13/2025, 03:26:30 AM

Last time I replaced the air conditioning filter on my Haval H3 myself, I realized it's located behind the glove compartment in front of the passenger seat. To access it, you first need to empty the glove box, then unscrew the two screws at the bottom, which allows the glove box to drop down. Inside, there's a plastic cover that you can lift to remove and replace the filter. Make sure the arrow on the filter is pointing downward when installing it, otherwise the airflow won't be strong enough. It's important to change the filter every six months because it traps dust and bacteria inside the car, preventing air conditioning odors and benefiting respiratory health. I often drive long distances, and after replacing it, the air feels much fresher, saving me the cost of maintenance at the 4S shop.

Was this review help?
4
Share
Expand All
OliveRose
10/11/2025, 01:12:37 AM

The air conditioning filter of the Haval H3 is installed inside the glove compartment on the passenger side, near the lower part of the dashboard. When replacing it, it's best to ensure the car is turned off. First, remove the items from the glove compartment, loosen the fixing screws to detach the glove compartment, and then you can see the filter cover. If it's clogged, the air conditioning airflow will decrease, dust will accumulate in the car, and it can easily cause allergic reactions. With years of driving experience, I recommend checking it every 5,000 kilometers, especially during the rainy season when bacteria are more prevalent. The design of its location is quite convenient for DIY, just make sure not to install the filter upside down. Spending a little money to replace it can help maintain the air quality inside the car.

Was this review help?
2
Share
Expand All
DiJeremiah
11/24/2025, 01:17:59 AM

The cabin air filter in the Haval H3 is hidden behind the glove compartment on the passenger side, which is a bit concealed but not hard to locate. I typically replace it every 6 months since it filters the air inside the car, preventing dust and pollen from affecting health—especially important for family members with sensitivities. After opening the glove box, you just need to unscrew some bolts to access the filter housing, making sure the arrow points in the correct direction. The placement is well-designed, making replacement fairly straightforward. The first time might take a bit of effort, but once you're familiar with the process, it only takes a few minutes.

Was this review help?
9
Share
Expand All
DeRowan
01/14/2026, 02:49:59 AM

The air filter for the Haval H3 is located behind the inner side of the glove box. The specific replacement method involves first emptying the glove box, removing the screws at the bottom to let the glove box drop down, and then opening the filter cover at the back. A clogged filter can lead to reduced airflow or unpleasant odors, affecting driving comfort. I enjoy car maintenance and recommend regular cleaning with compressed air to extend its lifespan; the design of its location makes DIY easy, saving on repair costs. Remember to align the arrow marking the air intake direction to avoid incorrect installation.

Was this review help?
20
Share
Expand All
GrahamFitz
04/10/2026, 10:57:52 PM

Locating the Hover H3's cabin air filter took me some effort—it's tucked away behind the glove compartment on the passenger side. To replace it, you need to unscrew and open the glove box, where you'll find a small housing for the filter. Make sure to install it in the correct orientation as marked. Last time I installed it backward, the airflow weakened, forcing me to redo the job. This design saves cabin space but may require practice for beginners to avoid mistakes. Replacing the filter every six months improves air quality, ensuring a more comfortable drive.

Was this review help?
1
Share
Expand All
More Q&A

Why Does the Car Fuel Gauge Needle Not Move?

The fuel gauge needle not moving is usually due to a damaged fuel float. It is recommended to go to a repair shop to connect the two wires of the fuel float. If the fuel gauge needle reaches the top, it means the fuel float is damaged. If it still doesn't move, check the wiring and the instrument panel. If the needle doesn't move right after filling up the tank, it's because the fuel float is pushed to the top of the tank by the buoyancy of the fuel, and the sensor-connected needle won't move. Only after consuming some fuel and the float descends will the needle move with the sensor. Below is an introduction to car instruments: 1. Car instruments consist of various gauges, indicators, and especially warning lights and alarms, providing the driver with necessary vehicle operation parameters. According to their working principles, car instruments can be roughly divided into three generations. The first generation is mechanical gauge movements; the second generation is called electrical instruments; the third generation is fully digital car instruments, which are networked and intelligent, with more powerful functions, richer display content, and simpler wiring connections. 2. The car fuel gauge mainly displays the amount of gasoline in the fuel tank. This gauge usually doesn't have issues. It's worth noting that when the fuel gauge needle is below the minimum red line, the car can still travel 30-40 kilometers, but it is still recommended not to wait until the needle reaches the bottom or the fuel warning light comes on before refueling, as cars use electric fuel pumps.
108
Share

Where is the cabin air filter located in a Volvo S80?

Volvo S80's cabin air filter is located under the glove compartment on the passenger side. The replacement method for Volvo S80's cabin air filter is: 1. Remove the screws of the cover panel under the glove compartment; 2. Take off the cover panel and filter cover to replace. The Volvo S80 has body dimensions of 4991mm in length, 1861mm in width, and 1490mm in height, with a wheelbase of 2976mm. The Volvo S80 features MacPherson strut independent front suspension and multi-link independent rear suspension. It is equipped with a 2.4L naturally aspirated engine producing maximum power of 170PS (125kW) and peak torque of 225Nm, mated to a 5-speed automatic transmission.
101
Share

How Many Types of Brake Pad Materials Are There?

There are five types of automotive brake pad materials: asbestos, metal, ceramic, and high-carbon (titanium) fiber. Automotive brake pads generally consist of a steel plate, an adhesive insulation layer, and a friction block. The steel plate is coated to prevent rust, and the coating process is monitored using an SMT-4 furnace temperature tracker to ensure quality by detecting temperature distribution. Below is an introduction to these five types of brake pads: 1. Asbestos material: Low cost and lightweight, widely used in trucks and construction vehicles. 2. Semi-metallic material: This is the default material for brake pads in all vehicle models upon factory release. These brake pads have a relatively low friction coefficient, typically around 0.38, and a shorter lifespan. Some manufacturers produce these pads with a higher friction coefficient, though this can lead to noise issues. 3. Metal material: Metal materials include iron and copper. One type is commonly referred to as wear-resistant iron, appearing very dark with no visible spots. Another type contains copper powder, where brass or copper metal blocks or small particles can be seen on the surface. 4. Ceramic brake pads: Moderate density, high-temperature resistance, corrosion resistance, and significantly lower noise compared to metal materials. A key feature is minimal dust production. Genuine ceramic brake pads contain aramid fibers, offering far superior lifespan and performance compared to the above-mentioned types. 5. High-carbon (titanium) fiber: Used in high-end vehicles and relatively rare in the market. Carbon (titanium) fiber is an upgraded version of ceramic pads. They are lightweight, high-strength, have a small thermal expansion coefficient, good thermal conductivity, and heat resistance. Carbon fiber provides stable friction curves, minimal thermal impact on friction surfaces, and wear resistance over 1.5 times that of standard ceramic pads.
120
Share

What engine is equipped in the Geely King Kong?

Geely King Kong is equipped with a 1.5L naturally aspirated engine, with a maximum horsepower of 102ps, a maximum power of 75kw, and a maximum torque of 141nm, paired with a 5-speed manual and automatic transmission. The dimensions of the Geely King Kong are: length 4342mm, width 1692mm, height 1435mm, wheelbase 2502mm, minimum ground clearance 158mm, fuel tank capacity 45L, and curb weight 1103kg. The front suspension of the Geely King Kong is a MacPherson independent suspension, and the rear suspension is a torsion beam non-independent suspension. The Geely King Kong is equipped with 185/60R15 front tires and 185/60R15 rear tires.
111
Share

What Causes the Steering Wheel Noise in the New Santana?

New Santana steering wheel noise is caused by issues such as a faulty airbag clock spring, lack of oil in the shock absorber's plane bearing, loose stabilizer bar bushings, or dirty power steering fluid. The details are as follows: Faulty Airbag Clock Spring: If the noise comes from inside the steering wheel, it is mostly due to a dry airbag clock spring. Remove the steering wheel's airbag clock spring and apply some grease. Check if the noise persists. If it does, promptly replace the airbag clock spring, as it indicates damage. Lack of Oil in the Shock Absorber's Plane Bearing: When turning the steering wheel, if the noise comes from outside the vehicle, it is likely due to insufficient oil in the shock absorber's plane bearing. Open the hood and listen to see if the noise originates from the shock absorber's top mount. This will confirm if the noise is from the plane bearing. If it lacks oil, apply some grease. If the noise continues after greasing, replacement is necessary. Loose Stabilizer Bar Bushings: If the noise is not from the shock absorber's plane bearing, check if the stabilizer bar bushings are loose or damaged. Loose or damaged stabilizer bar bushings can cause noise not only when turning the steering wheel but also when driving on uneven roads. Loose bushings can be fixed by adding shims, but damaged ones must be replaced. Dirty Power Steering Fluid: If the power steering fluid is too dirty, it increases the pressure in the power steering system, causing a buzzing noise from the power steering pump. Promptly replace the power steering fluid in such cases.
116
Share

What car has a logo featuring a cross with a snake beside it?

The logo featuring a cross with a snake beside it belongs to Alfa Romeo. Taking the 2020 Alfa Romeo Giulia as an example, its body dimensions are: length 4643mm, width 1860mm, height 1438mm, with a wheelbase of 2820mm and a fuel tank capacity of 58 liters. The 2020 Alfa Romeo Giulia features a MacPherson strut front suspension and a multi-link independent rear suspension. It is equipped with a 2.0T turbocharged engine, delivering a maximum horsepower of 280PS, a maximum power of 206kW, and a maximum torque of 400Nm, paired with an 8-speed automatic transmission.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.