···
Log in / Register

Where is the cabin air filter located in the Beidou Star?

6Answers
DelMadelyn
07/23/2025, 11:44:39 AM

The Beidou Star does not come with a cabin air filter, but it has a reserved space for installing one. The specific location is inside the glove compartment on the passenger side. Taking the 2016 Beidou Star X5 as an example, it is classified as a micro car with the following dimensions: length 3664mm, width 1610mm, height 1722mm, and a wheelbase of 2485mm. It has a fuel tank capacity of 42 liters and a curb weight of 940kg. The 2016 Beidou Star X5 features a MacPherson strut front suspension and a single longitudinal swing arm non-independent rear suspension. It is powered by a 1.4L naturally aspirated engine, delivering a maximum horsepower of 97PS, a maximum power of 71kW, and a maximum torque of 120Nm, paired with a 5-speed manual transmission.

Was this review help?
120
Share
OBrandon
08/10/2025, 07:36:48 AM

The air conditioning filter of the Beidou Star is located behind the glove compartment on the passenger side. I replaced it myself last time. First, you need to remove the glove compartment by pressing the clips on both sides and squeezing them towards the middle to release it. Then, you'll see a rectangular cover; pry it open to access the filter. I recommend buying the corresponding filter model on Taobao. The original factory filter has large gaps that let dust through, so I replaced it with an activated carbon one for better filtration. Remember to install it with the arrow pointing downward, otherwise, it may affect the airflow. The whole process takes about 15 minutes, and doing it yourself saves you 80 yuan in labor costs. Next time, it would be better to clean the leaves from the ventilation ducts while replacing the filter.

Was this review help?
5
Share
Expand All
SanOmar
09/22/2025, 01:33:38 AM

I've been driving the Beidou Star for seven or eight years. The cabin air filter is located behind the glove box, and you need to remove the glove box to access it. First, open the glove box, press the side panels inward, and you can remove the entire glove box. After removal, you'll see a white filter box; just pinch the clips and pull it out. If you find the filter is worn out, don't hesitate to replace it. Last time, I didn't change it in time, which caused the blower to make strange noises. Recently, I replaced it with a bamboo charcoal filter, and the air purification effect has significantly improved. I recommend changing it once a year, or every six months in northern areas with more dust and sand.

Was this review help?
13
Share
Expand All
AddysonDella
11/05/2025, 03:53:29 AM

Changing the air conditioning filter on the Beidouxing is quite simple, it's located behind the glove compartment on the passenger side. After opening the glove compartment, press both sides inward with both hands, and the entire glove compartment will come off. Behind it, there's a rectangular cover; opening it reveals the filter slot. The key point is not to install it backwards—the arrow indicating the airflow direction should face the rear of the car. Last time, I replaced it with a PM2.5 filtering filter, and the air conditioning odor was significantly reduced when driving on the highway. Be careful not to break the plastic clips during the disassembly and installation process.

Was this review help?
5
Share
Expand All
OCassandra
12/26/2025, 05:41:21 AM

The design of placing the air filter behind the glove box in the Beidou Star is quite reasonable. When replacing the filter yourself: 1. To remove the glove box, press the clips on both sides and avoid forcing it open. 2. Pull out the old filter and check the amount of dust; if it's black, it must be replaced. 3. Buy a new filter with activated carbon to absorb odors. 4. Pay attention to the airflow direction when reinstalling. 5. Take the opportunity to clean the air vent. Last time I replaced the filter, I found thick dust accumulated on the blower fan blades; after cleaning, the airflow increased by two levels.

Was this review help?
12
Share
Expand All
McJustin
03/24/2026, 01:10:40 AM

The air conditioning filter of the Beidou Star is located behind the glove box on the passenger side. Those with strong hands-on skills can replace it themselves. When removing the glove box, locate the clips on both sides and press firmly on the recessed areas with your index fingers. For the new filter, it's best to choose one with more pleats for higher filtration efficiency. The composite fiber filter I replaced has been used for half a year, and I can clearly feel the fresher air every time I turn on the external circulation. Remember to replace the new filter before summer each year to avoid musty odors. By the way, don't forget to empty the glove box before disassembling.

Was this review help?
10
Share
Expand All
More Q&A

Are motorcycles also exempt from inspection for 6 years?

Motorcycles enjoy a 6-year inspection exemption. It's important to note that although motorcycles can benefit from this 6-year exemption, they still need to undergo annual registration stamping during the inspection period. Failure to do so will result in penalties for overdue inspection. Documents required for obtaining the inspection exemption mark: For vehicles exempt from inspection for 6 years, the traffic management department will not physically inspect the vehicle when issuing the inspection mark. They will only review the following documents: the application form for motor vehicle inspection mark, the motor vehicle driving license, the compulsory traffic accident liability insurance certificate, and the proof of vehicle and vessel tax payment or exemption. They will also verify the records of traffic violations and accident handling. If all requirements are met, the inspection mark will be issued, noted on the supplementary page of the driving license, and the application form will be archived in the motor vehicle records.
116
Share

What is the length of the Hongqi H9 in meters?

The dimensions of the Hongqi H9 are as follows: length is 5137mm, width is 1904mm, height is 1493mm, and the wheelbase is 3060mm. Detailed information about the Hongqi H9 is provided below: 1. The Hongqi H9 is equipped with a 3.0-liter V6 supercharged engine. The engine has a maximum power of 200kW and a maximum torque of 400 Nm. This engine features hybrid injection technology and uses an aluminum alloy cylinder head and block. 2. The engine with hybrid injection technology can choose different fuel injection methods under different operating conditions, which can improve engine efficiency and reduce fuel consumption. 3. The use of supercharging technology increases the engine's air intake, resulting in smoother power output from the supercharged engine, thereby enhancing the vehicle's ride comfort.
109
Share

Why Can't the Motorcycle Be Pushed Backwards?

Check the brakes, especially if there is an issue with the rear brake. Inspect whether the transmission belt pulley, gears, and bearings are damaged. If a sliding device is installed, it might also be damaged. Deformed Footrest: The footrest is deformed, causing the gear lever to be blocked when stepped backward. Loose Gear Wheel Screw: The fixing screw on the left side of the gear cam (usually under the gear indicator switch) is loose, preventing the motorcycle from moving backward. Kick Starter Not Reset: The kick starter is not reset properly; moving it a few times to return to its original position should help. Gear Shift Mechanism Fault: Malfunctions in the gear shift arm or gear shift hook. Brake Shoe: The return spring of the brake shoe is broken. Solution:
119
Share

How to Use the Cruise Control on a Wrangler?

The cruise control switch for the Wrangler is located on the right side of the multifunction steering wheel. Press the NO button, accelerate to the desired speed, and then press SET. Here's a guide on using the Wrangler's cruise control and an introduction to the vehicle: 1. Turn on the cruise control switch, accelerate to over 40 km/h, and set the cruising speed. 2. The Wrangler is a rugged off-road vehicle under the Jeep brand, featuring a very retro exterior design. It is equipped with a 2.0-liter turbocharged engine, delivering a maximum power of 195.4 kW and a maximum torque of 400 Nm. The engine reaches its maximum power at 5000 rpm and its maximum torque at 3000 rpm. 3. This engine utilizes direct fuel injection technology and is constructed with an aluminum alloy cylinder head and block. 4. The engine is paired with an 8-speed automatic transmission.
115
Share

How to Get into the Back Seat of a Mustang?

On both sides of the front seats of the Ford Mustang, there are handles. Pulling these handles allows the backrest of the front seats to move. By tilting the front seats forward, one can access the rear seats. Below is some related information: 1. In terms of exterior design, the iconic extended hood and shorter rear deck mark 40 years of history, just as these classic design elements have become symbols of the Mustang since the 1960s: the C-shaped openings on the body sides, the triple-element taillights, and the galloping horse emblem in the center of the grille. 2. For the interior, the optional interior color accent package is inspired by the acclaimed Mustang concept car interior, featuring charcoal black leather seats with red accents, red door panels, and red floor mats. The aluminum interior trim further enhances the sense of the Mustang's technical excellence.
108
Share

Where are the drainage outlets for the Volkswagen Magotan's doors located?

The drainage holes for the Magotan's doors are located at the bottom of the doors, with two holes on the inner edge of the door's outer panel. Here is some relevant information: 1. During the use of the car, the drainage holes should be checked regularly to ensure they are clear and avoid blockages that could cause unnecessary trouble. 2. In daily car use, we can clean obvious leaves and debris near the drainage holes inside the car. However, fine mud or debris may be hidden in the hoses or pipes, so besides visually inspecting the drainage holes, we also need to check the drainage pipes. 3. The drainage holes in the sunroof and engine compartment are the most prone to blockages, so inspections of these two areas should be a priority. The most effective method to check drainage is to pour clean water into the drainage holes and observe the speed and condition of the drainage.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.