Where is the cabin air filter located in Dongfeng Fengshen AX7?

2 Answers
KarterDella
07/24/25 9:44am
Dongfeng Fengshen AX7's cabin air filter is located inside the glove compartment on the passenger side. Here are situations when the cabin air filter needs replacement: Unpleasant odors inside the vehicle: After cleaning or deodorizing the interior, if strange smells persist or the air remains stale, consider replacing the cabin air filter. After driving 20,000 kilometers: It's recommended to replace the cabin air filter after 20,000 kilometers. In areas with poor air quality (frequent sandstorms or smog), replacement may be needed as early as 10,000 kilometers. Generally, the filter should be replaced every 7,000 to 10,000 kilometers. In severely polluted environments, earlier replacement is advised. The product's effectiveness is typically guaranteed within these mileage ranges.
Was this review help?
5
5
Share
Ricky
08/11/25 5:01am
I recently replaced the air conditioning filter on my AX7 by myself, which is located behind the glove compartment on the passenger side. You need to remove the glove compartment first—there are clips on both sides that can be easily pressed to release it. Inside, you'll see a plastic cover; pry it open to access the filter slot. The design is quite user-friendly, making it easy to insert and remove the filter. When buying a new filter, remember to choose one with activated carbon to help eliminate odors. I usually replace it every six months, but with the recent heavy smog, I've been changing it every three months. After replacement, there's a noticeable improvement in the air quality inside the car. Doing it myself saved a lot of money—the labor cost at a shop is enough to buy two filters. Just remember to install the filter with the arrow pointing downward; otherwise, it affects the filtration efficiency. I installed it upside down the first time.
Was this review help?
10
1
Share
Expand All
More Forum Discussions

Can Drum Brakes Modified to Disc Brakes Pass Annual Inspection?

Drum brakes modified to disc brakes can pass annual inspection. The inspection items include: 1. Check whether the engine, chassis, body and its ancillary equipment are clean, complete and effective, whether the paint surface is uniform and beautiful, whether the main assemblies have been replaced, and whether they are consistent with the initial inspection records; 2. Test whether the vehicle's braking performance, lights, exhaust and other safety performance meet the requirements of relevant regulations; 3. Check whether the vehicle has been modified, remodeled or transformed, and whether the driving license, license plate, and all vehicle file registrations are consistent with the actual condition of the vehicle; 4. Check whether the license plate, driving license, and enlarged license plate characters sprayed on the vehicle are damaged, altered or illegible, and whether they need to be replaced.
18
3
Share

What are the causes of tire blowouts on highways?

Factors that can cause tire blowouts include insufficient tire pressure, overinflation, improper installation, lack of proper maintenance, tire wear and aging, sidewall bulges, manufacturing defects, and severe impacts. Below are additional details: Measures to prevent tire blowouts: Replace tires in a timely manner, perform wheel alignment and tire balancing, rotate front and rear tires, maintain proper tire pressure, and avoid speeding. How to handle a tire blowout: Hold the steering wheel firmly and adjust the vehicle's direction gently; avoid repeatedly jerking the steering wheel and do not slam on the brakes. Wait until the vehicle gradually slows down before gently steering; set up a warning triangle behind the vehicle to prevent secondary accidents.
1
0
Share

How to Open the Front Hood of a Ford Focus?

To open the front hood of a Ford Focus, follow these steps: 1. Rotate the Ford logo on the front of the car counterclockwise by 90 degrees; 2. Insert the key into the knob and simultaneously lift the engine hood upwards with your right hand. Taking the 2020 Ford Focus as an example, it belongs to the compact car category, with body dimensions of: length 4378mm, width 1810mm, height 1468mm, and a wheelbase of 2705mm. The 2020 Ford Focus features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 122PS, a maximum power of 90kW, and a maximum torque of 153Nm, paired with a 6-speed manual transmission.
4
2
Share

What is the function of the engine solenoid valve?

The function of the engine solenoid valve is: to use the electromagnetic force generated by the electric current flowing through the coil to attract the valve core, which is divided into normally open and normally closed types. It is usually used to cut off the flow of oil, water, gas and other substances, and cooperate with pressure, temperature sensors and other electrical equipment to achieve automatic control. Its characteristic is that it can work normally under vacuum, negative pressure and zero pressure, but the diameter generally does not exceed 25mm. The working principle of the engine solenoid valve is: when energized, the electromagnetic coil generates electromagnetic force to lift the closing member from the valve seat, and the valve opens; when the power is off, the electromagnetic force disappears, and the spring presses the closing member on the valve seat, and the valve closes. Automotive solenoid valves also include distributed direct-acting solenoid valves, direct-acting solenoid valves, and pilot-operated solenoid valves.
17
5
Share

Which Side is the Child Lock On?

Child locks are installed on the rear doors. The method to operate the child lock is as follows: 1. Open the small toggle safety mechanism below the rear door lock; 2. Toggle it towards the end with the child icon; 3. Close the door. At this time, the door cannot be opened from inside the car and can only be opened from outside. The function of the child lock is to prevent children from opening the door during driving when there are children in the rear seats, thereby avoiding danger. There are two types of child locks: knob-type and toggle-type. The knob-type child lock requires inserting a key into the corresponding hole to rotate the knob switch for locking and unlocking operations, which is more complex than the toggle-type child lock.
1
0
Share

What is the ground clearance of the Volkswagen Lavida?

The ground clearance of the Volkswagen Lavida is 110mm. Taking the 2021 Volkswagen Lavida as an example, it belongs to the compact car category with body dimensions of: length 4670mm, width 1806mm, height 1474mm, and a wheelbase of 2688mm. The fuel tank capacity is 51 liters. The 2021 Volkswagen Lavida features a front MacPherson strut independent suspension and a rear torsion beam non-independent suspension. It is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 113ps, a maximum power of 83kw, and a maximum torque of 145nm, paired with a 5-speed manual transmission.
14
3
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.