···
Log in / Register

Where is the button to display average fuel consumption on the K3 dashboard?

6Answers
AaronDella
08/25/2025, 11:07:14 PM

On the Kia K3, there is a button at the top of the right control lever under the steering wheel (the lever that controls the wipers). Pressing it cycles through the displayed information, which includes: instant fuel consumption, average fuel consumption, remaining driving range, current driving time, current driving distance, and current average speed. The average fuel consumption for the Kia K3 is around 8~10L/100km. Here are the detailed specifications of the Kia K3: 1. Configuration: Engine: 1.5L 115HP L4. Intake form: Naturally aspirated. Transmission: CVT (simulated 8-speed). Transmission type: Automatic. Fuel type: Gasoline. Curb weight: 1230KG. 2. Fuel consumption: Comprehensive road condition tested fuel consumption: 7.08L/100KM. Tested mileage: 30,605KM. Low fuel consumption: 6.36L/100KM. High fuel consumption: 7.80L/100KM. Average fuel cost (based on 92# gasoline at 7.08 yuan/liter): 0.5 yuan/km.

Was this review help?
110
Share
StEmily
09/07/2025, 11:24:54 PM

I used to drive a K3 for quite some time. The button for displaying the average fuel consumption is located in the control area on the left side of the steering wheel, among a cluster of small buttons, usually labeled 'Trip' or 'INFO'. Pressing it once allows the dashboard screen to cycle through various displays, including average fuel consumption and instant fuel consumption. When I first bought the car, I was a bit confused too, but later found its location by checking the owner's manual. If the fuel consumption display becomes inaccurate, you can long-press that button to reset the data, which helps in monitoring your driving habits. Paying attention to this while driving can assist you in adjusting the throttle during congested road conditions, saving you a significant amount on fuel costs.

Was this review help?
11
Share
Expand All
LaWyatt
10/21/2025, 11:28:20 PM

In the K3 model, the average fuel consumption button on the dashboard is typically located within the multifunction button panel on the right side of the steering wheel, such as the control button with up and down arrows. Press the left or right buttons or the central INFO button, and the dashboard display will switch to show the average fuel consumption figure. This small feature is quite practical, providing real-time feedback on your driving efficiency—for example, fuel consumption tends to be lower during highway driving compared to city driving. If you can't find it, don’t forget to check the display options in the central control system settings, as the button location may change after some owners modify their vehicles.

Was this review help?
1
Share
Expand All
MacQuinn
12/04/2025, 10:50:00 PM

I often drive my K3 for outings. The button to display average fuel consumption is located on the small button panel on the steering wheel—just press the round button with the symbol to toggle it. While driving, a quick glance at the dashboard shows the fuel consumption data, saving the hassle of stopping. During my beginner days, I almost thought it was a hidden feature until a friend pointed out that every display screen has a manual diagram. Making it a habit to check regularly helps avoid the awkward situation of forgetting to refuel.

Was this review help?
19
Share
Expand All
SanBrandon
01/25/2026, 12:13:20 AM

The average fuel consumption button on the K3 dashboard is located in the steering wheel control key area. Simply press the 'Trip' button on the multifunction steering wheel to switch display modes. The operation is very simple – just press it and observe the screen changes. If there's no response after pressing, it might be due to a malfunctioning button, so it's advisable to check the battery or restart the vehicle. This feature is very helpful for optimizing driving, such as reminding you to drive more smoothly when rapid acceleration causes fuel consumption to rise quickly.

Was this review help?
9
Share
Expand All
DelEverett
04/20/2026, 11:01:53 PM

Regarding the K3 dashboard, the average fuel consumption display button is located on the left-hand side of the steering wheel. Simply press the button marked with the function icon to cycle through and easily view the readings. I remember when I first drove this car, it only took me a few minutes to familiarize myself with the button's location. Besides fuel consumption, it can also display other data such as mileage statistics. Over time, it has helped me significantly reduce fuel expenses, making it particularly suitable for daily commuters.

Was this review help?
13
Share
Expand All
More Q&A

BMW X6 Engine Model?

BMW X6 Engine Model is: N201997mL. The following is the relevant content introduction: 1. The BMW X6 intake method is turbocharged, and the transmission method is an eight-speed automatic manual transmission. 2. The BMW X6 is equipped with a 3.0-liter twin-turbo diesel engine, a 3.0-liter twin-turbo gasoline engine, a new 4.4-liter V8 gasoline direct injection twin-turbo engine, and a 4.8-liter gasoline engine. BMW defines the X6 as an SAC. Compared to the X5, which is positioned for on-road performance, the X6 has evolved more thoroughly in terms of road performance, integrating the sporty capabilities of a coupe with the versatility of an SUV in terms of exterior design and power handling. The BMW X6 is produced based on BMW's CLAR architecture and features a new family face, with improvements in both configuration and power.
109
Share

Is Land Rover Produced in India?

Land Rover currently has four production bases. First, Solihull in the UK, which is the earliest and most important production base for Land Rover, with the highest output, mainly producing the Range Rover, Range Rover Sport, Land Rover Discovery, and Land Rover Defender. Second, Halewood in the UK, primarily producing models like the Range Rover Evoque, Range Rover Velar, and Discovery Sport. Third, the Pune factory in India, mainly producing models such as the Range Rover, Discovery, and Defender, with very low output, only tens of thousands of vehicles per year. Fourth, the Changshu Economic Development Zone in Jiangsu, China, with an annual designed capacity of 130,000 vehicles, mainly producing models like the Evoque and Discovery Sport. This has also led to the longest car name in China: Chery Jaguar Land Rover Range Rover Evoque and Chery Jaguar Land Rover Discovery Sport.
116
Share

Where is the oil filter located on the Atenza?

The oil filter on the Atenza is located beneath the engine. The oil filter element is the oil filter itself, and its function is to remove impurities, gums, and moisture from the oil, delivering clean oil to all lubrication points. The Atenza measures 4870mm in length, 1840mm in width, and 1450mm in height, with a wheelbase of 2830mm, and features a front-engine, front-wheel-drive layout. In terms of exterior design, the car adopts the all-new KODO design language, with standard LED headlights featuring a scorpion-eye design, enhancing its original beauty, sense of power, and speed with an added touch of elegance. The interior has been completely revamped with the 6.5-generation interior design, featuring innovations in layout, materials, and technological features.
117
Share

What is the minimum ground clearance of the Chevrolet Orlando?

The minimum ground clearance of the Orlando is 180 millimeters. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary, which is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. Here is some related information about the Orlando: 1. The Orlando is a model officially released by Chevrolet. It has a wheelbase of 2796mm. The second and third-row seats of the Orlando support 4/6 and 5/5 proportional folding respectively. When only the 5-seat configuration is used, the trunk capacity can reach 479L, and the trunk can accommodate two 20-inch suitcases. 2. The fuel standard for the Orlando is 92 or above unleaded gasoline, and its emissions comply with the China VI emission standards. The suspension system (front/rear) consists of MacPherson independent suspension/multi-link independent suspension.
105
Share

What is the body construction material of the Baojun 730?

The Baojun 730 features a unibody construction. In terms of its external structure, the new Baojun 730 body utilizes over 55% high-strength steel, with hot-stamped steel plates applied in multiple key areas to enhance overall rigidity while reducing body weight. The design of front and rear energy-absorbing boxes effectively absorbs impact energy. Details about the Baojun 730 are as follows: 1. Exterior design: The large shield-shaped grille appears more three-dimensional, with the front grille connected to the headlight cluster to widen the horizontal visual effect. The bumper adopts a through-type design with single-spoke chrome trim accents, elevating the vehicle's premium feel. Combined with sharp front-end lines and distinctive headlight styling, it exudes a strong sense of modernity. 2. Interior: The new Baojun 730 automatic transmission version features a fresh black-gray color scheme, paired with dark wood-grain imitation panels on the dashboard, ice-blue ambient lighting, and new dual-tone premium seats, creating a layered interior with quality craftsmanship and visual spaciousness.
101
Share

How to Open the Thermostat on a Chevrolet Cruze?

The thermostat on a Chevrolet Cruze opens using the coolant temperature to melt the wax. The thermostat utilizes expansion or contraction to open or close the flow of coolant, automatically adjusting the amount of water entering the radiator based on the coolant temperature. This changes the circulation range of the coolant to regulate the cooling system's heat dissipation capacity. The steps to replace the thermostat are as follows: 1. Turn off the engine and open the front hood. Disconnect the negative terminal of the battery to prevent the electric fan from suddenly operating during the process, which could cause injury. 2. Remove the plastic cover outside the timing belt. The position of the generator may affect the thermostat replacement, so the generator assembly needs to be removed. Place a water-catching tray under the car and prepare to remove the lower hose. 3. After removing the lower hose, the antifreeze will gush out—be careful of burns. At this point, the thermostat itself can be seen. Remove the faulty thermostat. 4. Install the new thermostat. After installation, apply a layer of sealant to the hose connection to prevent leaks.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.