
The anti-skid switch for the XC60 is located below the gear lever on the driver's right side, marked with an "OFF" button. The main function of ESP (Electronic Stability Program) is to control the longitudinal and lateral stability of the vehicle, ensuring it moves according to the driver's intentions. ESP is typically enabled by default unless manually turned off by pressing the "OFF" button. The anti-skid system is usually active, but it is not recommended to keep it on in the following situations: 1. When the vehicle is stuck in mud or during off-road driving. In cases of being stuck or other off-road scenarios, some wheel slip is necessary to help the vehicle escape or climb. Here, ESP's characteristic of preventing wheel slip can be counterproductive. Therefore, during extreme off-road conditions or when stuck, it's advisable to turn off ESP first to facilitate escape. 2. When encountering wheel slip while climbing on rainy or snowy days. On snowy or wet roads, especially when starting on an incline, wheels are prone to slipping. The system will detect the wheel slip and limit engine output, and ESP intervention may hinder progress. Thus, it's better to turn off ESP before attempting to proceed.

















I've been driving a XC60 for almost three years now. The anti-skid button is located in the control area on the left side of the steering wheel. To be more specific, if you sit in the driver's seat and look down near the panel around your left knee, you'll find a button with a small car and curved lines icon - it's quite easy to locate by touch. I always keep it activated while driving as the anti-skid system works really well, especially helping stabilize the car during rainy or snowy conditions. However, there was one time when I got stuck in mud, and I had to temporarily turn it off to get out, then immediately reactivated it afterward for safety. I'd advise against casually toggling this button, especially for new drivers who might forget to turn it back on, which increases skidding risks. If you really need to find it, check your vehicle's manual as the exact position might vary slightly between different model years.

I've studied the design of the XC60, and the anti-skid button is typically integrated into the area on the left side of the driver's instrument panel, near the center console. That button features a car skidding symbol—a light press partially deactivates the system, while holding it down for a few seconds turns it off completely. This system is enabled by default, monitoring wheel slip to automatically apply brakes for correction, so you generally don't need to worry about it during city driving. However, turning it off can improve power delivery when off-roading or driving in deep snow. I recommend regularly checking the button's condition to ensure good contact. If you notice looseness or sticking, visit a dealership immediately to inspect the wiring—never compromise on safety features.

My car is a XC60, and the anti-skid switch is located on the control panel just below the steering wheel, with a clear icon that's easy to spot at a glance. Normally, keep this button turned on—don’t toggle it off randomly, as the system helps control skidding on slippery roads. Operation is simple: just press the button. But remember, after turning it off, a warning light will illuminate on the dashboard, so be sure to turn it back on after completing specific tasks. This feature is crucial for driving safety, and it’s best to adjust it to automatic mode based on weather conditions.

I believe safety comes first when driving a . The anti-skid button is conveniently located on the driver's side door control panel, within easy reach on the dashboard. Don't turn off this function lightly—it uses sensors to prevent loss of control and can be lifesaving, especially during high-speed sharp turns. Simply press the button lightly to operate it. If the button malfunctions, it might be due to wiring issues or a blown fuse, in which case you should visit a professional repair shop. Personally, I never turn it off when driving my XC60 on the highway. It's become a habit to check the vehicle's condition and keep the system activated for peace of mind.

I often take long trips in my XC60. The anti-skid button is located in the row of switches on the left control area of the steering wheel, marked with a car sliding symbol. Just glance down near the center console when looking for it. It's convenient to use, but I don't recommend turning it off unless necessary. Temporarily disabling it in mud or snow can help you get out more easily. Keep it on for daily driving to protect your family, as the system fine-tunes braking to prevent rollovers. By the way, here's a tip: the button may be smoother in new cars, while older models tend to accumulate dust, affecting sensitivity. Regularly wipe the control panel to maintain performance.


