···
Log in / Register

Where is the air conditioning filter of the new Peugeot 308 located?

6Answers
OKyle
07/29/2025, 02:14:50 PM

The air conditioning filter of the new Peugeot 308 is located in the engine compartment, above the right front wheel. Be cautious of the working area's temperature to avoid burns from high heat. Steps to replace the air conditioning filter: 1. First, remove the soundproofing cotton. You can use a flat-head screwdriver to pry open the clips and take out the soundproofing cotton; 2. Open the cover of the air conditioning filter, pull out the old filter, and install the new one; 3. Replace the cover and restore the soundproofing cotton. The clips can be snapped back into place by hand. The new Peugeot 308 is a compact sedan under the Peugeot brand. This model is equipped with three types of engines: a low-power version 1.2-liter turbocharged engine, a high-power version 1.2-liter turbocharged engine, and a 1.6-liter naturally aspirated engine. Its front suspension uses a MacPherson independent suspension, and the rear suspension employs a torsion beam non-independent suspension.

Was this review help?
103
Share
MarleyRose
08/14/2025, 06:44:27 AM

I found the cabin air filter of the new Peugeot 308 is hidden behind the glove compartment on the passenger side, with a very user-friendly design. I just replaced it myself – the process is straightforward: First, open the glove box, and you'll notice small clips or screws securing the bottom or sides. Once released, the glove box can be easily removed or flipped downward, revealing a rectangular cover. Lift the cover to access the filter slot, then simply pull out the old filter and insert the new one, making sure the arrow direction is correct. The whole process takes less than 15 minutes and requires no special tools. I believe regular replacement is crucial, especially in dusty areas, as accumulated dirt in old filters can compromise air freshness and increase allergy risks. I recommend checking it every six months or 10,000 kilometers to maintain good cabin air quality. Even beginners can DIY this – it saves money and hones hands-on skills.

Was this review help?
10
Share
Expand All
Maeve
10/14/2025, 12:57:56 AM

With over a decade of experience repairing cars myself, replacing the cabin air filter in the new Peugeot 308 is a breeze—it's conveniently located below the glove box. Here's the step-by-step: Open the passenger-side glove compartment, release the clips or screws at the mounting points inside, and partially remove the entire assembly. You'll then spot a square frame slot—simply pull out the old filter and slot in the new one. All you need is a basic screwdriver or just your bare hands. After replacement, ensure everything is securely fastened back in place. The design is thoughtful, avoiding the hassle of dismantling the dashboard. The filter itself is crucial for blocking dust and pollen; when clogged, cooling efficiency drops and odors may develop. I recommend opting for a carbon-infused filter for better performance and extended lifespan. DIY saves time and dealership costs while enhancing daily driving comfort.

Was this review help?
2
Share
Expand All
VanElisa
11/27/2025, 12:53:12 AM

As a health-conscious car owner, I pay close attention to the location of the cabin air filter, as a clean filter can reduce bacteria and odors inside the vehicle. The new Peugeot 308 positions it behind the glove box for easy access and replacement. After opening the glove box, locate and release the inner fastening clips to reveal the filter cover. Replacing the old filter significantly improves air freshness. For allergy sufferers, frequent changes can prevent discomfort caused by pollen. I recommend replacing it at least once a year or based on mileage. The well-designed location helps avoid inhaling dust, which is harmful to health. Choose high-quality filter materials to improve the breathing environment.

Was this review help?
7
Share
Expand All
McJameson
01/17/2026, 02:21:14 AM

Finding the cabin air filter location on the new Peugeot 308 is quite convenient, as it's positioned at the bottom inner side of the glove box. To access it, simply open the glove box and release a few small clips to reveal the filter cover, allowing for quick replacement. The whole DIY process takes about 10 minutes, saving you the waiting time at a repair shop. Regular replacement improves AC efficiency, extends system lifespan, and prevents costly repairs. The easily accessible location minimizes the risk of improper operation.

Was this review help?
15
Share
Expand All
Reginald
04/13/2026, 04:13:01 AM

Modern cars like the new Peugeot 308 feature user-centric designs, with the cabin air filter conveniently located behind the glove box. After replacement, I noticed significantly improved airflow. The accessible placement stands out: simply open the passenger-side glove box, release the clips to reveal the cover. This intelligent design eliminates complex disassembly while incorporating health-conscious elements like reminder systems (though manual operation is required). Choosing the correct filter size during replacement ensures optimal filtration efficiency, directly impacting driving comfort.

Was this review help?
20
Share
Expand All
More Q&A

Does the Audi Q7 have a seven-seater version?

The Audi Q7 does have a seven-seater version. The Audi Q7 is a mid-to-large-sized 5-door, 7-seater SUV with body dimensions of 5067mm in length, 1970mm in width, and 1731mm in height, with a wheelbase of 2996mm. It features a front-engine, four-wheel-drive layout and uses multi-link independent suspension both at the front and rear. The Audi Q7 is equipped with a 2.0T turbocharged engine and an 8-speed automatic transmission, delivering a maximum power of 180 kW at 5000 to 6500 rpm and a maximum torque of 370 Nm at 1600 to 4300 rpm.
101
Share

Is the Chevrolet Trax a four-wheel drive vehicle?

The Chevrolet Trax does not offer a four-wheel drive version. Introduction to the Chevrolet Trax: 1. Powertrain: It is equipped with two engines, one being a 1.0-liter turbocharged engine delivering 125 horsepower and a maximum torque of 180 Nm; the other is a 1.3-liter turbocharged engine producing 165 horsepower and a maximum torque of 240 Nm. 2. Body dimensions: The length, width, and height are 4270mm, 1791mm, and 1602mm respectively, with a wheelbase of 2570mm. 3. Suspension: The front suspension uses a MacPherson independent suspension, while the rear suspension employs a torsion beam non-independent suspension.
103
Share

How to resolve the yellow engine light issue in Mercedes-Benz C260?

The solutions for the yellow engine light issue in Mercedes-Benz C260 are as follows: 1. Pull over and park the car, turn off the engine for 5-10 minutes. Without pressing the brake pedal, press the start button once, or without depressing the clutch, turn the key halfway to the 'on' position. The car will initiate a self-check function after powering on. Wait for 5-10 seconds and observe whether the warning lights on the dashboard turn off, leaving only the engine warning light. 2. If other warning lights remain illuminated, it is necessary to take the car to a 4S shop or repair shop to inspect the corresponding modules and components. If only the engine warning light remains on, start the engine again and observe whether the engine warning light persists. 3. If the engine warning light turns off, no further action is needed. If the engine warning light remains on, take the car to a 4S shop or repair shop to inspect the engine-related components and modules.
119
Share

Is the Difference Between BMW 7 and BMW 5 Significant?

The difference between BMW 7 and BMW 5 is not very significant, but there are still some subtle distinctions. Body Size Differences: The dimensions of the 5 Series are 5087x1868x1500 mm with a wheelbase of 3108 mm, while the 7 Series measures 5250x1902x1498 mm with a wheelbase of 3210 mm. It can be seen that the 7 Series is slightly larger than the 5 Series, with a wheelbase nearly 100 mm longer. Power Differences: The 530Li Leading Edition of the 5 Series uses a 2.0-liter turbocharged L4 engine with a maximum horsepower of 252 hp, while the 730Li Leading Edition of the 7 Series uses a 2.0-liter turbocharged L4 engine with a maximum horsepower of 258 hp. Additionally, the 5 Series has a maximum power of 185 kW and a maximum torque of 350 Nm, whereas the 7 Series has a maximum power of 190 kW and a maximum torque of 400 Nm. Although the difference in performance between the two models is not substantial, the 7 Series still slightly outperforms the 5 Series. Other Configuration Aspects: There are also many differences in other aspects between the two models, such as tire specifications, suspension, seats, center console, headlights, and other technological configurations.
120
Share

Does a new car need an annual inspection within two years?

A new car purchased within two years requires an annual inspection. The maintenance required for a new car's annual inspection includes: 1. Checking the engine's working condition, such as whether the pipeline connections are normal, whether there are any leakage points, whether the engine sound is normal, and whether there are any abnormal noises; 2. Checking whether the coolant content is in a normal state; 3. Checking the wear degree of the brake pads and tires, as well as the tire pressure condition; 4. Checking whether there are any scratches or corrosion on the chassis components; 5. Checking the remaining amount of power steering fluid and whether there are any oil leakage phenomena at the oil pipe interfaces; 6. Comprehensive cleaning of the vehicle, including the engine compartment, body, and interior.
109
Share

How to Remove the Steering Gear of the Cavalier?

The steps to remove the steering gear of the Cavalier are as follows: 1. First, remove the outer part of the steering wheel. If there are no screws at the back, gently apply force to detach the cover. At this point, loosen the central screw by 3~4 turns (remove the key and turn the steering wheel to lock it in place), remove necessary components, and prepare the tools. 2. Take out the removal tool and remove the nut. Note that you should not immediately take out the steering wheel at this stage. Be sure to make alignment marks first to avoid misalignment during reinstallation, which could cause the steering wheel to be off-center. Reinstallation should follow the reverse order.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.