···
Log in / Register

Where is the air conditioning filter element of the Haifuxing located?

6Answers
ClaireRose
07/29/2025, 02:46:14 PM

The air conditioning filter element of the Haifuxing is located under the glove box on the passenger side. Here are some relevant details: 1. If the filter element is dirty, you can clean it by blowing compressed air from the reverse side. Operation method: Hold the air gun 5 cm away from the filter element and blow at a pressure of 500 kPa for about 2 minutes. The air filter element is very prone to dust accumulation. Use compressed air to remove the dust, but never wash it with water, as this can easily cause damage. 2. The Haifuxing is a compact car launched by FAW Haima, with body dimensions of 4464mm in length, 1695mm in width, and 1425mm in height, and a wheelbase of 2610mm. The Haifuxing is equipped with a 1.5L naturally aspirated engine, delivering a maximum horsepower of 111ps and a maximum torque of 147nm, paired with a 5-speed manual transmission.

Was this review help?
112
Share
LaIris
08/14/2025, 08:16:29 AM

I've been driving a Haifuxing for a while now, and the location of the cabin air filter is really easy to find—it's right behind the glove compartment in front of the passenger seat. You just need to pull open the glove compartment and tug it downward firmly to see a plastic cover panel behind it. Gently pry it open with a small screwdriver, and the filter is hidden inside. This design is quite thoughtful, allowing you to change it yourself without needing to visit a repair shop. Remember to replace the filter regularly, especially in summer, as dust buildup can clog the AC, causing unpleasant odors in the airflow and potentially affecting your health. I usually replace it once a year—buying an original one online only costs a few dozen yuan, making it simple and cost-effective. Wear gloves when replacing it to keep your hands clean, and you'll immediately notice fresher air quality inside the car, which even improves your driving mood.

Was this review help?
14
Share
Expand All
DelLeo
10/14/2025, 04:02:21 AM

With over 20 years of automotive repair experience, I can confirm that the cabin air filter in models like the Haima Family is typically located behind the glove compartment on the passenger side. You'll need to remove the entire glove box assembly - most variants are secured with either snap fasteners or screws. Once the cover plate is detached, the filter can be slid out for maintenance. This strategic placement keeps the filter away from engine heat sources, maintaining optimal airflow cooling efficiency and preventing rapid dust accumulation. I recommend inspection every 10,000 km or six months. A clogged or deformed filter will reduce AC cooling performance and potentially overload the blower motor. When replacing, opt for activated carbon versions which trap more pollutants, significantly improving cabin air quality - particularly beneficial for elderly passengers and children.

Was this review help?
15
Share
Expand All
Richard
11/27/2025, 09:09:15 PM

I've been driving my Haima Family Star for several years. When traveling with kids, the cabin air filter is located behind the glove box. After opening the glove box door, there's a small hidden compartment - just unclip the cover to access the filter. The filter doesn't just block dust; it also filters pollen and bacteria, preventing allergy-induced rhinitis in children. A simple replacement takes about ten minutes at minimal cost, yet significantly improves cabin comfort. Remember not to buy cheap knockoff filters - their poor filtration makes them a waste of money. Regular AC maintenance also reduces odors, ensuring cool, fresh airflow without any strange smells, making long drives much more pleasant.

Was this review help?
13
Share
Expand All
LilyLynn
01/17/2026, 10:33:02 PM

As a DIY enthusiast, I find the air conditioning filter of the Haifuxing conveniently located behind the glove compartment, making the process very straightforward. Step one involves pulling out the glove compartment. Step two requires locating the removable plastic panel at the back and gently prying open the clips with a tool to remove it. In step three, pull out the old filter to clean off the dust, and when installing the new one, ensure the arrow direction is correctly aligned. The entire process doesn't require professional tools—just have some wet wipes handy to clean your hands. Familiarizing yourself with the filter's location has great benefits: it saves time and money by doing it yourself, and you also learn some maintenance knowledge. With improved air conditioning efficiency, cooling is faster and fuel consumption is reduced, maintaining the car's condition for longer durability and enhancing the overall driving experience.

Was this review help?
4
Share
Expand All
VanConnor
04/14/2026, 12:16:21 AM

As an experienced driver, I pay close attention to driving safety details. The location of the Haifu Star's cabin air filter behind the glove compartment on the passenger side is quite practical. Regularly replacing the filter can prevent air conditioning duct blockages and avoid blowing out dirty air that may cause allergies or distraction. Its convenient location allows for quick removal, and choosing high-quality filter screens during replacement helps prevent PM2.5 inhalation. This not only improves in-car air quality but also reduces the likelihood of air conditioning system failures, lowering maintenance costs. Replacing it every six months is fundamental, especially during rainy seasons or dusty weather when filters are prone to moisture and mold, which can affect health. Developing this habit makes driving more reassuring, with a fresh and odor-free cabin environment that reduces fatigue even during long highway drives.

Was this review help?
19
Share
Expand All
More Q&A

What is the interval duration for two consecutive lane changes?

Consecutive lane changes require a ten-minute interval. Introduction to consecutive lane changes: So-called consecutive lane changes refer to continuing to change lanes before the vehicle body has straightened. Consecutive lane changes are not allowed. The correct way to change lanes is to change to one lane, then drive straight for a distance before changing to the next lane. Turn signals must be used before changing lanes: The primary action before changing lanes is to use the turn signal, but this is often intentionally or unintentionally ignored by many drivers. In traffic accidents caused by lane changes, the main cause is vehicles changing lanes suddenly without using turn signals. This is especially dangerous when driving on highways. Before changing lanes, promptly using the turn signal to alert other vehicles is a good habit that drivers must develop and a reflection of good driving etiquette. Whenever the vehicle's trajectory changes, the turn signal should be used as a basic form of driving communication.
107
Share

Will 5 Liters of Antifreeze Mixed with 1 Liter of Water Freeze?

5 liters of antifreeze mixed with 1 liter of water will not freeze. However, adding water to automotive antifreeze reduces its performance. The impurities in water can cause sedimentation, diminishing the antifreeze's normal effectiveness. At lower temperatures, this can lead to pipe freezing, affecting normal operation. How to choose antifreeze: The key indicators are freezing point and boiling point. Market options include -15°C, -25°C, -30°C, and -40°C. Generally, select one that is at least 10°C lower than your region's lowest temperature. Methods to check for antifreeze shortage: Observe the antifreeze warning light on the dashboard. If lit, it likely indicates low antifreeze levels, though high cylinder temperatures could also trigger it. Inspect the antifreeze reservoir. If the level is below the minimum mark (MIN), do not continue driving; add antifreeze promptly. Check the level indicators on the antifreeze tank. Normal levels are between the MAX and MIN marks. If below MIN, it indicates a shortage.
117
Share

Can cleaned automotive urea barrels be used to store drinking water?

Automotive urea barrels generally need to meet food-grade packaging standards. For example, Calorie automotive urea barrels are made from new HDPE material and can be used to store drinking water or alcohol after thorough cleaning, but it is strongly recommended to ensure they are thoroughly cleaned. Some brands of automotive urea barrels are made from recycled materials, which are harder to clean properly. Barrels that have previously contained other products or have been stored for too long are not recommended for storing drinking water, as they may cause secondary contamination. Introduction to automotive urea: Automotive urea solution is a type of urea that is highly soluble in water. At 20°C, 105 grams can dissolve in 100 milliliters of water, resulting in a neutral pH solution. This means that as long as the automotive urea solution barrel is cleaned with water, it can be used to store drinking water. Functions of urea: It helps treat exhaust gases to reduce pollutants, optimize engine performance, and improve fuel efficiency.
107
Share

What are the symptoms of a faulty car blower?

Car blower failure symptoms are as follows: No air ventilation from AC: Prolonged use causes excessive dust accumulation, increasing friction between rotor and bearings, leading to rotor obstruction or even seizure, resulting in coil overheating damage. After power off, open the blower rear cover, add several drops of lubricating oil (like sewing machine oil) to both bearing sleeves while rotating the blades until they move freely, thus resolving the blower issue. Reduced airflow: If the blower motor operates normally but certain vents show abnormal airflow (too strong/weak), check corresponding air ducts for blockages, inspect whether dampers can open properly, and examine connecting pipes for leaks. Repair according to specific conditions after inspection.
114
Share

Is it correct to shift into high gear and drive quickly through flooded roads?

When driving through flooded roads, it is incorrect to shift into high gear and drive quickly. Instead, you should use a low gear to ensure the vehicle has sufficient driving force. Enter the water smoothly to prevent splashing water from entering electrical equipment, which could cause short circuits. Maintain medium engine speed and a steady speed, avoiding stopping, shifting gears, or making sharp turns while driving through the water. Pre-drive inspection: Before entering the water, someone must check the depth, width, water flow speed, the extent of damage to the road caused by the water, and whether the water level is rising or falling. Based on these observations, determine whether it is safe for the vehicle to pass. If the conditions are not safe, do not risk driving through. Protective measures: When it is confirmed that passage is possible, take necessary protective measures for the vehicle, such as closing the louvers, raising the position of the battery, waterproofing the electrical system, and elevating the exhaust pipe outlet.
111
Share

What is the appropriate tire pressure for the Elantra?

The normal tire pressure range for the Elantra is 2.4-2.5bar. Due to seasonal factors, the tire pressure can be increased by 0.2bar in winter and reduced by 0.1bar in summer. The Elantra's tire pressure monitoring system is indirect, utilizing the vehicle's ABS balance control, and only displays low pressure when there is a leak. To check the tire pressure, first prepare a tire pressure gauge, locate the position of the factory tire pressure label, press the gauge onto the tire valve to measure and read the value, and remember to replace the valve cap after checking. If the tire pressure monitoring indicator light comes on (a yellow symbol with an irregular circle, no stamp on top, four small spikes below, and an exclamation mark inside), there are generally three possible reasons: Abnormal tire pressure: The system typically alerts when pressure is below 1.8bar or above 3.0bar. In this case, tire inspection and pressure adjustment are necessary. Tire pressure monitoring not reset: After inflating the tires, if the tire pressure monitoring system is not reset in time, it will continue to record the previous data, causing the indicator light to stay on. Simply reset the tire pressure monitoring system to resolve this. Damaged tire pressure sensor: The tire pressure sensor, which monitors tire pressure, is installed inside the tire and connected to the tire inflation valve. If the sensor is damaged during driving, the tire pressure warning light will also illuminate. For sensor damage, the only solution is to replace it with a new part.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.