Where can I watch the tutorial video for the Changan CS75 automatic transmission?

What Do the Different Gear Positions in a Vehicle Mean?

The following are the descriptions of the gear positions in a vehicle: 1. P (Park): This is the parking gear, which uses the mechanical device inside the transmission to lock the rotating parts of the vehicle. It must only be engaged when the vehicle is completely stopped. Additionally, when turning off the engine, the gear must always be in the P position. 2. R (Reverse): This is the reverse gear, used when backing up. It's important to note that you should never force the gear into R when the vehicle hasn't come to a complete stop, as this can cause wear to the transmission. 3. N (Neutral): This is the neutral gear, typically used during brief stops. In this position, you can release your foot from the brake pedal to rest. However, if you're on a slope, you should still keep your foot on the brake to prevent the vehicle from rolling, unless you engage the handbrake or electronic brake. 4. D (Drive): This is the forward driving gear. When in D, the driver only needs to control the accelerator pedal to adjust the speed. The transmission will automatically determine the appropriate gear based on the throttle input and vehicle speed, eliminating the need for manual shifting.

110

Share

Where to Install Ambient Lights?

Automotive ambient lights can be installed in locations such as door panels, under the front and rear seats, and the center console. As a new type of interior decorative lighting, ambient lights are essentially flexible LED strip lights that can be installed in areas where ambient lighting is desired. Vehicle owners can customize the color and brightness of the ambient lights according to their preferences. Here is some relevant information: Function of Ambient Lights: Car ambient lights serve as decorative lighting, typically in colors like red, blue, or green, primarily to enhance the cabin's aesthetics at night and improve the driving experience. Principle: Most ambient lights come in several colors, controlled by a fixed lighting controller that can adjust the color and turn the lights on or off.

119

Share

What Are the Reasons for Spark Plugs Being Prone to Damage?

Spark plugs are prone to damage due to the following reasons: excessively rich air-fuel mixture and mismatched spark plug models for the vehicle. Symptoms of damaged spark plugs: The car may experience difficulties in starting, low power, excessive exhaust emissions, increased fuel consumption, and other malfunctions. Methods to determine if a spark plug is damaged: Remove the spark plug and observe its appearance color to assess its condition. A normal spark plug's insulator skirt and electrodes should appear gray-white, gray-yellow, or light brown. A properly functioning spark plug has a reddish-brown insulator skirt, with an electrode gap between 0.8-0.9mm and no signs of electrode burn. If the spark plug is contaminated with oil or deposits but not damaged, it can continue to be used after cleaning off the oil and deposits. If the spark plug is severely damaged, showing signs such as blistering at the top, black streaks, cracks, or melted electrodes, the cause of the damage should be identified. After troubleshooting, replace the spark plug with a new one. Additionally, if the spark plug appears black as if smoked, it indicates the wrong heat range was selected or the air-fuel mixture is too rich, with oil creeping up.

120

Share

Why does a new car shake after starting?

Here are the specific reasons why a new car shakes after starting: 1. Suspension system failure: The suspension system is mainly responsible for filtering the vibrations from the engine during operation. If there is a problem with the suspension, these vibrations will be directly transmitted to the steering wheel and the cabin, affecting driving. When the engine is idling, turning on the electrical systems inside the car can also easily cause shaking. The engine increases its load due to the electrical systems being turned on, causing the idle speed to drop. To compensate for the shaking caused by the drop in idle speed, the engine will automatically increase the RPM. 2. Unstable oil pressure: Check whether the fuel supply pressure and the intake pressure sensor are normal. If the fuel pump's supply pressure is abnormal or the intake pressure sensor's readings are incorrect or malfunctioning, it can cause the car body to shake. 3. Cold start: The main reason for shaking during a cold start is incomplete fuel combustion, which results in insufficient power. The ignition energy is relatively low during startup, and when the temperature of the fuel and lubricating oil is low, more fuel is needed to meet the power demand. Over time, the gap at the spark plug's electrode gradually increases, leading to a decrease in ignition energy and poor fuel atomization, which causes the car body to shake. Additionally, aging ignition coils, aging high-voltage wires of the spark plugs, or leakage can also reduce ignition energy.

109

Share

Can Highway Cameras Detect Unlicensed Driving?

Yes. Electronic eyes equipped with "facial recognition" technology can clearly capture the driver's face. Traffic police departments can then analyze the surveillance footage, match the driver's information in the system, and determine whether the driver holds a valid driver's license. If the driver does not have a license, or if the license has been revoked, canceled, or expired, it constitutes unlicensed driving. Additional Information: For traffic violations such as unlicensed driving, traffic police not only conduct spot checks on suspicious vehicles but can also use electronic eyes for surveillance. Modern electronic traffic enforcement cameras are increasingly powerful and now feature "facial recognition" capabilities, which can be used to capture and address various traffic violations.

115

Share

What is the distance for the three-point braking in the driving test and where does it occur?

Three-point braking is a type of voice-activated braking. You need to press the brake once at the arrow marking and once at the stop line or just as you touch the zebra crossing. However, pressing it more times is also acceptable, as long as you remember to press and release quickly, and then lightly press the accelerator to avoid stalling the car. Here is some additional information: 1. Introduction: Subject Three is part of the motor vehicle driver's license examination, officially known as the Road Driving Skills and Safe & Civilized Driving Knowledge Test. 2. Test Content: The Road Driving Skills Test generally includes: preparation before starting, simulated lighting test, starting, driving in a straight line, gear shifting operations, changing lanes, pulling over, driving straight through intersections, turning at intersections, meeting oncoming vehicles, overtaking, making U-turns, and night driving. The content may vary depending on the type of vehicle license being tested. The Safe & Civilized Driving Knowledge Test generally covers: requirements for safe and civilized driving operations, safe driving knowledge under adverse weather and complex road conditions, and post-accident handling procedures.

110

Share

Where can I watch the tutorial video for the Changan CS75 automatic transmission?

What Do the Different Gear Positions in a Vehicle Mean?

Where to Install Ambient Lights?

What Are the Reasons for Spark Plugs Being Prone to Damage?

Why does a new car shake after starting?

Can Highway Cameras Detect Unlicensed Driving?

What is the distance for the three-point braking in the driving test and where does it occur?

What is the Suitable Tire Pressure in Winter?

Where is the Light Switch in a Sedan?

What are the consequences of not displaying the annual inspection sticker?

What to Do When the Motorcycle Keyhole is Locked?