···
Log in / Register

Where are the positive and negative terminals of a Volvo battery?

3 Answers
Preston
09/03/25 6:26am
The positive terminal of the battery will be covered with a red cap, and opening the cap will reveal a terminal with a fuse, indicating the positive terminal. If the markings are not visible or are unclear, it is best to use a multimeter to test it to avoid damaging the vehicle's electrical components by connecting incorrectly. Use the voltage setting on a digital multimeter; if the reading is positive, the end connected to the red probe is the positive terminal, and if the reading is negative, the end connected to the black probe is the positive terminal. Here is some related information about car batteries: 1. Introduction: A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. Typically, the term 'battery' refers to a lead-acid battery, which is mainly made of lead and its oxides, with a sulfuric acid solution as the electrolyte. 2. Working principle: It uses a lead plate filled with sponge-like lead as the negative electrode, a lead plate filled with lead dioxide as the positive electrode, and a 22-28% dilute sulfuric acid solution as the electrolyte. During charging, electrical energy is converted into chemical energy, and during discharging, chemical energy is converted back into electrical energy.
Was this review help?
8
3
Share
LeLevi
09/15/25 7:53am
With over a decade of experience driving Volvos, the battery terminals are located under the hood—easily visible once you open it. Typically, the positive terminal is on the right front, marked with a red cover or clear signage, while the negative terminal is on the left, either black or directly attached to the car body. Always exercise caution: turn off the engine first and wear insulated gloves to avoid short circuits. I remember once helping a stranded friend jump-start his car—the sequence matters: connect the positive terminal first, then the negative. Reversing the order could fry the electrical system. Models like the XC60 or S90 have similar layouts, but if your car’s battery is in the trunk, that’s a different story. Regular maintenance should include checking for corrosion or loose connections, as battery health directly impacts cold-weather starts. Safety first—never let metal tools touch both terminals simultaneously.
Was this review help?
7
3
Share
Expand All
NicoleFitz
10/29/25 8:32am
I've been driving a Volvo for three years, and as a young car owner, I was a bit confused the first time I had to locate the battery terminals. When you pop the hood, the battery is at the front of the car. The positive terminal on the right has a bright red cap, while the negative terminal on the left is black or sometimes uncovered. When working on it yourself, make sure the engine is off and take your time—don’t touch anything randomly to avoid electric shock. If you’re unsure about the positions, it’s best to check the manual or take a photo with your phone for reference. I once had a dead battery in winter, and when replacing it, connecting the positive and negative terminals correctly ensured a smooth start. While Volvo designs are consistent across models, beginners should still be cautious—safety first, and using insulated tools is a basic recommendation. Also, remember to check your battery’s condition regularly, as battery issues can disrupt your entire trip.
Was this review help?
18
4
Share
Expand All
More Forum Discussions

What are the Ford off-road vehicle models?

Ford off-road vehicles include: Ford Bronco, first-generation Ford Explorer, Ford F-150 Raptor, Ford Everest, and Ford Toller T4. An off-road vehicle is a type of automobile specifically designed for off-road use, primarily referring to vehicles capable of operating on rough terrain. Taking the 2019 3.5T Ford F-150 Raptor Performance Edition as an example: Appearance: It is a pickup truck launched by Ford (Imported), with a length of 5910mm, width of 2192mm, height of 1992mm, and a wheelbase of 3708mm. Power: It is equipped with a 3.5T twin-turbocharged engine, with a maximum power of 380kw and a maximum torque of 280nm, paired with a 10-speed automatic transmission.
16
4
Share

How to open the rear wing of the new A7?

The method to open the rear wing of the new A7 is as follows: 1. The rear wing of the Audi A7 opens automatically. When the vehicle speed reaches the set speed, it will automatically open. When the speed reaches 130km/h, the hidden spoiler wing on the upper end of the luggage compartment cover will automatically rise to provide sufficient downforce. When the speed drops to 80km/h, it will smoothly retract into the rear of the car. 2. Manual opening: There is a dedicated button to control the rear wing below the display screen. Press it to raise the rear wing. Additional information: The car rear wing refers to the ducktail-shaped protrusion installed at the rear end of the car's trunk lid, which is part of the car's aerodynamic kit. Its main function is to reduce the lift at the rear of the vehicle.
18
2
Share

How to fold down the rear seats of the Geely Emgrand GS?

Method to fold down the rear seats of the Geely Emgrand GS: The Emgrand GS rear seats are equipped with buckle-style fixing switches at the top, with pivot connections between the backrest and the seat cushion. The backrest can be easily folded down with a one-touch operation to increase the trunk space. Here is some relevant information about the Emgrand: 1. The new Emgrand offers 10 models with two engine options, 1.4T and 1.8L, for consumers to choose from. It adopts a new design concept, adds a high-gloss red paint option, and is equipped with the GKUI Geely Smart Ecosystem. 2. Advanced configurations such as full-speed ACC adaptive cruise system are available on the 1.4T models, further solidifying the market position of the Emgrand GS after its launch.
18
5
Share

Where is the Cabin Air Filter of Haval H2S Located?

The cabin air filter of Haval H2S is located inside the glove compartment in front of the passenger seat. Below is the replacement method for the cabin air filter: 1. Clear out all items from the passenger glove compartment. 2. After cleaning the glove compartment, use a screwdriver to remove the screws on both sides of the glove compartment. 3. Once the screws are removed, press the plastic clips on both sides of the glove compartment to take it down. 4. After removing the glove compartment, you will see the cabin air filter housing. 5. Press the plastic clip on the cabin air filter housing and then remove the housing. 6. After taking down the housing, replace it with a new cabin air filter, and then reassemble the glove compartment in the reverse order of disassembly. The entire process of replacing the Haval H2S cabin air filter is now complete.
4
1
Share

Where is the cabin air filter located in Dongfeng Fengshen H30?

Dongfeng Fengshen H30's cabin air filter is located under the glove compartment on the passenger side. Remove the three self-tapping screws on the outermost inner side facing the seat, pry open the cover to reveal a long sliding cover. There is a self-tapping screw on the left side, remove it and slide it to the left to see the cabin air filter. Below is the replacement method for Dongfeng Fengshen H30's cabin air filter: 1. Open the glove compartment and remove all items; 2. Remove the screws fixing the glove compartment; 3. Remove the side panel and continue removing screws; 4. Take off the glove compartment; 5. Locate the cabin air filter compartment and remove its cover; 6. Replace with a new cabin air filter; 7. Reassemble the glove compartment following the disassembly steps to complete the replacement.
20
0
Share

Can a driver's license be inspected in a different location?

According to the latest regulations on motor vehicle driver's license inspection, a driver's license can be inspected annually in a different location. Below is relevant information about the annual inspection of a driver's license in a different location: Required Materials: According to Article 57 of the "Regulations on the Application and Use of Motor Vehicle Driver's Licenses," if there are changes in the motor vehicle driver's information, the "Motor Vehicle Driver's License" must be replaced. When applying, the "Motor Vehicle Driver's License Application Form" must be filled out. Processing Location: Processing Location: The vehicle management office where the "Motor Vehicle Driver's License" was issued or any other vehicle management office outside the place of issuance. Processing Hours: Monday to Friday, 9:00 AM to 5:00 PM (excluding national statutory holidays and adjusted working days).
6
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.