···
Log in / Register

How to fold down the rear seats of the Geely Emgrand GS?

6Answers
MacEvangeline
09/02/2025, 11:49:54 PM

Method to fold down the rear seats of the Geely Emgrand GS: The Emgrand GS rear seats are equipped with buckle-style fixing switches at the top, with pivot connections between the backrest and the seat cushion. The backrest can be easily folded down with a one-touch operation to increase the trunk space. Here is some relevant information about the Emgrand: 1. The new Emgrand offers 10 models with two engine options, 1.4T and 1.8L, for consumers to choose from. It adopts a new design concept, adds a high-gloss red paint option, and is equipped with the GKUI Geely Smart Ecosystem. 2. Advanced configurations such as full-speed ACC adaptive cruise system are available on the 1.4T models, further solidifying the market position of the Emgrand GS after its launch.

Was this review help?
118
Share
LoganFitz
09/15/2025, 01:29:17 AM

When I used to drive the Geely Emgrand GS, I often needed to fold down the rear seats to load large items, and the process was actually quite simple. Near the shoulder area of the rear seatback, you can find a small pull strap or handle. Pulling it firmly will release the seat lock. Then, gently push the backrest forward, and it will fold flat into the trunk. It's advisable to adjust or remove the headrest before operating to prevent it from getting stuck, and also check if any items in the trunk have been cleared. Folding down the rear seats significantly expands the space, making it especially suitable for family trips or grocery runs. I’ve used it to transport bicycles and camping gear, which was very convenient and practical. For regular maintenance, check the seat lubricant every six months to prevent rust and ensure smoother operation.

Was this review help?
19
Share
Expand All
Eileen
10/29/2025, 02:08:35 AM

As a veteran driver with 20 years of experience, I'm quite skilled at folding down the rear seats of the Geely Emgrand GS. The key is to locate the release mechanism at the top of the seat, pull the lever, and don't rush—apply some force to unlock the latch before pushing the backrest forward. Always ensure the vehicle is stationary during operation and avoid doing this on slopes. Be mindful not to exceed the folding angle to prevent damaging internal mechanisms. When fully flattened, the rear seats align with the trunk floor, facilitating loading of bulky items like moving boxes for kids or garden tools—I've tested fitting two large suitcases. Regularly clean the seat tracks to prevent dust buildup from affecting functionality, and always prioritize safety.

Was this review help?
14
Share
Expand All
DelSadie
12/12/2025, 01:20:39 AM

As a family car owner, folding down the rear seats of the Geely Emgrand GS is as simple as a few seconds. There's a small pull ring beside the rear seat—just pull it firmly to unlock, then push the backrest down to flatten it. If the headrest is in the way, press it down first. This significantly increases the rear space, making it easier to pack more toys and snacks for outings with the kids, and even grocery shopping becomes more convenient. On weekends, I often take the whole family for outings, and folding down the rear seats makes the back much more spacious.

Was this review help?
10
Share
Expand All
ColinDella
02/01/2026, 02:29:38 AM

Safety first. Ensure the vehicle is parked and in neutral before folding down the rear seats. For the Geely Emgrand GS, operate by pulling the seat release mechanism to unlock, then gently push the backrest to fold it down—avoid forceful pushing to prevent injury. After completion, check that the seats are securely fixed and that the trunk space is clean and unobstructed. Regular maintenance of the release mechanism is recommended to prevent rust issues.

Was this review help?
7
Share
Expand All
VonAnastasia
04/27/2026, 12:41:36 PM

As a car enthusiast, I find the rear seat folding feature of the Geely Emgrand GS quite intelligent – simply locate the shoulder strap, pull it out to unlock, then fold forward for a completely flat surface. This design supports split-folding, allowing flexible adjustment of space. When folded down, it's perfect for large items like moving boxes or sports equipment, while also making it easy to clean dust off the seat surface in daily use. Remember to pull gently and lower slowly during operation to protect the lifespan of the buckles.

Was this review help?
6
Share
Expand All
More Q&A

What is the wading depth of the Tucson?

The maximum wading depth of the Tucson is 500mm. The wading depth of the Tucson is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration table. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when driving through waterlogged roads. Therefore, in terms of safe wading depth, off-road vehicles and SUVs have obvious advantages. However, for most compact cars and small cars with low chassis, the position of the vehicle's air intake should be used as a reference when passing through waterlogged roads. If the air intake is below the water level when the Tucson is wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it will cause serious damage to the engine's mechanical components (connecting rods, pistons, crankshaft, etc.). Therefore, the wading depth should not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct operations should be performed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting after stalling in water, which could cause severe damage due to water ingestion. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Follow the path taken by other vehicles and drive at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, observe warning water level markers, trees, and reference points such as the wheels and doors of other vehicles to estimate the water depth before deciding whether to proceed. Know your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not attempt to drive through. Instead, choose an alternative route.
112
Share

Where is the license plate with prefix Bu A from?

Currently, there is no license plate with the prefix Bu A. The installation method for license plates is as follows: 1. Take out the license plate screws and rotate them to insert the anti-theft caps; 2. Position the license plate correctly, align the screws with the gaps on the bumper, and secure them using tools; 3. Cover the anti-theft caps and press them into place. License plates, also known as vehicle registration plates, are mounted on the front and rear of vehicles, displaying the vehicle's registration number, registration region, or other relevant information. Their main functions are: 1. Identifying the vehicle's registered region through the license plate; 2. Tracing the vehicle's owner and registration details based on the license plate.
119
Share

Where is the OBD port of the Volkswagen Touran located?

The OBD port of the Volkswagen Touran is located behind the plastic cover under the steering wheel. The OBD system refers to the On-Board Diagnostics system, which is used to monitor the operating status of the engine and the exhaust treatment system in real-time. The Volkswagen Touran is a 5-door, 7-seater MPV with body dimensions of 4527mm in length, 1829mm in width, and 1659mm in height, with a wheelbase of 2791mm. It is equipped with a 1.4T turbocharged engine and a 7-speed dual-clutch transmission, delivering a maximum power of 10 kW and a maximum torque of 250 Nm. The drivetrain is front-wheel drive, with a McPherson independent suspension at the front and a four-link independent suspension at the rear.
102
Share

How to reset the maintenance light on a Mercedes-Benz E300?

Mercedes-Benz E300 maintenance light reset method is as follows: 1. Start the vehicle. 2. Switch the dashboard display to the odometer interface. 3. Press and hold the "OK" button on the left side of the steering wheel and the "Phone" button on the right side for several seconds until the maintenance menu appears. 4. Three menu options will appear ("Vehicle Data", "Dynamometer Test", "ASSYSTPLUS"), select "ASSYSTPLUS" and press the "OK" button to enter. 5. Select "Complete Maintenance" and press the "OK" button to enter. 6. Select "Confirm Complete Maintenance" and press the confirmation button on the steering wheel.
114
Share

What to Do If You Don't Know How to Drive After Getting Your License?

What to Do If You Don't Know How to Drive After Getting Your License? Here are some tips for novice drivers: 1. Familiarize yourself with the basic operations of the vehicle. Before driving, make sure you thoroughly understand and remember the basic operations of the car, such as the functions of various buttons and how to operate the lights. This will prevent you from panicking in critical moments. 2. Drive smoothly and slowly. For novice drivers, stability is the most important. Maintain a slightly slower speed to give yourself enough time to observe and react. Avoid sudden acceleration and make sure to distinguish between the brake and accelerator pedals. Frequently check the rearview mirror to monitor the situation behind you. Stay calm and flexible when encountering problems—don’t overestimate your abilities or force yourself into awkward situations. 3. Stay focused. Novice drivers should give 100% of their attention to driving. Avoid fatigue, distractions, and being influenced by surrounding vehicles. Do not answer calls or use your phone while driving. Safety comes first. 4. Drive on familiar routes. Stick to routes you know well. If your driving skills aren’t yet proficient, avoid experimenting with unfamiliar roads, as they can increase risks for beginners. Unfamiliar routes may cause nervousness and added pressure, leading to accidents. 5. Keep your foot on the brake. When not pressing the accelerator, develop the habit of resting your right foot on the brake pedal. This ensures you can brake promptly when necessary, protecting yourself and avoiding mistaking the accelerator for the brake.
118
Share

What Causes Road Collapse?

Reasons are as follows: 1. Geological factors: Roads built on soft soil may collapse, and underground water seepage can also cause collapses, as well as mudslides and earthquakes. 2. Excessive groundwater extraction: Ground subsidence caused by excessive groundwater extraction is a slow, regional process, usually due to over-pumping of groundwater, which disrupts the original structure of the stratum, making the soil layer unstable and creating hidden dangers. When encountering underground construction or long-term soaking by rainwater, sudden road collapse occurs. 3. Soil erosion: Soil loss is mainly caused by frequent summer rains, which intensify the scouring of subgrade soil, causing significant deformation of surface rainwater. Additionally, broken underground pipes allow seepage water to dilute surrounding soil, leading to soil loss and sudden road collapse.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.