···
Log in / Register

What type of engine oil does the Volvo S60 use?

1Answers
DelilahAnn
07/24/2025, 07:26:23 PM

Volvo S60 uses 5W30 engine oil. Engine oil plays a crucial role in the vehicle's engine, providing functions such as lubrication and wear reduction, shock absorption, auxiliary cooling, rust and corrosion prevention, and sealing to prevent leaks. It can be considered the lifeblood of a car. The Volvo S60 is a mid-size luxury sedan under the Volvo brand. Volvo has equipped the S60 with three engine options: D3 2.0L, D5 2.5L, and T6 3.0L. Its high-end 3.0L turbocharged engine delivers a maximum power output of 304 horsepower and a peak torque exceeding 440 Nm. In terms of body dimensions, the car measures 4.628 meters in length, 1.865 meters in width, and 1.484 meters in height, with a wheelbase of 2.776 meters.

Was this review help?
117
Share
More Q&A

Which Department to Complain to About Car Quality Issues?

When encountering car quality issues, you can negotiate and resolve the matter with the seller; file a complaint with the car manufacturer for a solution; or lodge a complaint with the Consumer Association and relevant administrative departments. Below are the relevant details about complaints: 1. Filing a complaint with the Consumer Association and relevant administrative departments: When neither the 4S store nor the car manufacturer can effectively resolve the issue, or if the car is already out of warranty and repairs at the service center still fail to fix the problem, it is recommended that the car owner files a complaint with the Consumer Association and relevant administrative departments. After filing a complaint with the Consumer Association or relevant administrative departments, they will handle the case primarily through mediation based on the issues raised by the consumer. 2. Applying for arbitration or litigation: When neither the Consumer Association nor the relevant administrative departments can help resolve the issue, it is recommended that the car owner applies for arbitration or litigation. Arbitration is based on a dispute resolution agreement signed by both parties, where the consumer submits an arbitration application to the agreed arbitration committee; litigation refers to the consumer directly suing the vehicle's producer, seller, or service provider in a court with jurisdiction.
112
Share

What are the six starting mnemonics for Subject Three?

Subject Three starting mnemonics: First step (clutch), Second gear (first gear), Third turn (left signal), Fourth press (horn), Fifth release (handbrake), Sixth look (front, back, left, and right conditions), Seventh release and accelerate (release clutch, accelerate). More details are as follows: 1. Prepare to start in first gear, turn on the left signal before the car moves. 2. Sound the horn then release the handbrake, starting must be in semi-linked state. 3. Shift to second gear as soon as the car moves, slightly increase the throttle in second gear. 4. Turn off the signal then shift to third gear, further increase the throttle in third gear. 5. Increase speed and shift to fourth gear, quickly shift between fourth and fifth gears at high speed. 6. Clearly distinguish between two-foot clutch operations, and remember the standardized actions.
101
Share

How Long Can You Drive After the Audi A6 Brake Pad Warning Light Comes On?

Audi A6 brake warning light indicates that the brake pads have worn down to the manufacturer's preset wear limit. After the warning light comes on, there is usually 2~4mm of brake pad thickness remaining, which can theoretically last for about 1,000 kilometers. When the brake pads are completely worn out, metal-on-metal contact will occur, causing grooves on the brake discs and increasing safety hazards. Therefore, it is recommended to inspect and replace the brake pads as soon as possible after the warning light appears. Here are some braking techniques: 1. Emergency braking: Some vehicles are not equipped with ABS, so it is not advisable to apply full braking force at once. Instead, apply the brakes in two separate steps to prevent wheel lock-up, which can lead to skidding and loss of steering control. 2. Braking in rainy conditions: When driving on wet roads, avoid sudden braking or sharp turns of the steering wheel. After driving through water, it is best to gently apply the brakes twice to use inertia and friction to remove water from the brake discs, preventing brake failure during sudden braking.
115
Share

Can a Water-Damaged Car Key Still Be Used?

Water-damaged car keys can continue to be used after being disassembled and dried. Here are the relevant details: 1. Key: Most modern car keys are electronic keys, which are electronic devices. Therefore, do not use them directly after water exposure, as it may damage the internal circuits. You can disassemble the key and dry it with a hairdryer before reuse. 2. Precautions: Electronic keys contain batteries, which may cause a short circuit when exposed to water. Ensure the key is completely dry before attempting to unlock the car. Temporarily, you can use the mechanical key as a substitute. If the key still doesn't work, it's necessary to replace it with a new one promptly.
110
Share

What does it mean when the car CODE light is on?

Car CODE indicates that the indicator light self-test is required. When the self-test button is pressed, all indicator lights on the dashboard illuminate, indicating that all indicator lights can properly report fault conditions. More information about CODE is as follows: Introduction to the CODE light: The car CODE is a detection chip for the car. If the chip cannot be detected, the dashboard will light up. When this indicator is on, the car cannot be started. Attempting to start it multiple times may lock the engine, commonly known as engine immobilization. For cars equipped with an engine immobilizer system, even if a thief manages to open the door, they cannot drive the car away. Solutions for when the car displays CODE: If the car CODE light is flashing, it is likely a fuel-related issue. Check the front and rear oxygen sensors. Initial symptoms of failure include the engine fault light staying on or occasionally flashing on the dashboard. The car may still be drivable for a short time, but if left unrepaired for an extended period, the electronic fuel injection system's computer will not receive information about the oxygen concentration in the exhaust pipe, preventing feedback control of the air-fuel ratio. This will lead to increased engine fuel consumption and higher exhaust emissions. Therefore, it is essential to address the issue promptly by repairing or replacing the faulty components.
118
Share

How to Identify Whether a Car is China V or China VI?

To identify whether a car is China V or China VI, you can check the following aspects: 1. The relevant number in the emission standard column on the vehicle certificate: According to relevant laws and regulations, dealers are required to provide a certificate with the vehicle when selling it. Without this certificate, the vehicle cannot be registered. On the certificate, there is a column for the emission standard, which clearly indicates the emission standard number adopted by the vehicle. It doesn't matter if you don't understand the preceding numbers; the key is whether it states China V (indicating a China V model) or China VI (indicating a China VI model). 2. The relevant number on the environmental information list accompanying the vehicle: When purchasing a car, in addition to the certificate, there is an environmental information list in the accompanying documents. In the vehicle information section, there is a column for the emission stage, which will clearly and directly indicate whether the vehicle is China V or China VI. Just look carefully. 3. The relevant number in the vehicle conformity certificate: When picking up the car, there is another document called the vehicle conformity certificate, which contains many verification items. One of them is called "exhaust emissions," which directly states the standard number adopted for the 3C certification. GB18352.5-2013 refers to the fifth-stage emission standard, i.e., China V, while GB18352.6-2016 refers to the sixth-stage emission standard, i.e., China VI. 4. The number queried on the Motor Vehicle Environmental Protection Website: Simply visit the Motor Vehicle Environmental Protection Website, click on the public query platform, and then enter the VIN (vehicle identification number) and the last six digits of the engine number to query the relevant vehicle information, including content that can determine whether it is a China V or China VI vehicle.
103
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.