···
Log in / Register

What transmission does the Mercedes GLS use?

6Answers
RafaelDella
09/05/2025, 04:17:51 AM

Mercedes GLS uses Mercedes' 9-speed automatic manual transmission across the entire lineup. The following is a detailed introduction to the Mercedes GLS transmission: 1. The automatic manual transmission is a transmission device that combines manual and automatic shifting functions. This technology was developed to improve the economy and controllability of automatic transmissions, allowing the shift timing originally determined by the computer to be returned to the hands of the driver, thereby enhancing driving operability and enriching the driver's experience. 2. The automatic manual transmission combines manual shifting and automatic shifting in cars. This transmission combines the advantages of automatic and manual transmissions, minimizing power loss in the transmission system. When using the manual mode in a car with an automatic manual transmission, simply switch to manual mode and adjust the gear up or down as the speed changes. If the speed does not match the corresponding gear, the gear will automatically shift down. If the speed is higher than the current gear, you need to manually shift up.

Was this review help?
105
Share
Frederick
09/17/2025, 04:28:52 AM

As a seasoned car enthusiast, I've driven the Mercedes-Benz GLS equipped with a 9-speed automatic transmission. The gear shifts are incredibly smooth, especially during starts and acceleration, with almost no noticeable jerking. Paired with the engine's turbocharging, the power delivery is seamless, and it's also fuel-efficient during highway cruising. I also feel this transmission is optimized for off-road performance, providing stable torque control on inclines or muddy terrain with commendable reliability. Mercedes-Benz has consistently used this transmission in the GLS series for years, proving its durability. For enhanced driving excitement, switching to sport mode delivers more aggressive shift logic and exhilarating acceleration. In short, if you're after high performance and smooth driving, this choice won't disappoint—just remember to test-drive it thoroughly to experience the real-world performance.

Was this review help?
6
Share
Expand All
OEmiliano
10/31/2025, 10:10:06 PM

I usually commute to work in a GLS, which has a 9-speed automatic transmission that shifts smoothly and is very convenient for stop-and-go city driving. It starts smoothly at traffic lights with just a light tap on the accelerator, and doesn’t cause fatigue even in heavy traffic. The fuel consumption is well controlled, and the start-stop function helps save fuel. However, with long-term use, maintaining the transmission is quite important; it’s recommended to check the fluid every two years to avoid aging. The transmission used in Mercedes-Benz cars is reliable, with a low failure rate, making it very suitable for daily commuting. Additionally, it can adapt to driving habits—smooth shifts for gentle driving and quick responses for spirited driving. Overall, it’s a practical design that makes driving easier.

Was this review help?
6
Share
Expand All
RyderRose
10/31/2025, 10:12:08 PM

For family trips, the Mercedes-Benz GLS uses a multi-speed automatic transmission. I feel at ease driving it to take my kids to school or on vacations. The gear shifts are smooth and quiet, allowing the children to sleep soundly in the back seat. With 9 gears ensuring smooth high-speed driving and high safety, combined with the four-wheel-drive system, it doesn't slip in rainy weather. The transmission is generally durable, with few issues, making long trips worry-free. Additionally, Mercedes-Benz has added intelligent control that automatically adjusts to match road conditions, such as maintaining speed on uphill and downhill slopes. Regular maintenance is recommended to extend its lifespan.

Was this review help?
20
Share
Expand All
DeDonovan
12/14/2025, 09:18:05 PM

I'm curious about automotive technology. The Mercedes-Benz GLS features an automatic transmission with 9 gears, controlled by a computer that monitors driving data to shift gears. The design prioritizes smoothness and efficiency, such as quick downshifting for acceleration at high speeds and fuel economy at low speeds. Unlike manual versions which are cumbersome, it automatically adapts to road conditions. Additionally, Mercedes has optimized the hydraulic system to reduce wear and simplify maintenance. The multiple gears provide flexibility to handle various driving scenarios.

Was this review help?
11
Share
Expand All
VonSarah
12/14/2025, 09:20:18 PM

Having driven the GLS for many years, its 9-speed automatic transmission is quite reliable in shifting. Over time, the fluid needs to be replaced to avoid overheating and wear. It's smooth for city driving, but might have slight vibrations on long mountain roads. Mercedes-Benz transmissions use high-quality materials, ensuring long lifespan, and it's recommended to inspect every 30,000 kilometers. Additionally, it integrates with the engine and chassis to ensure stable overall response. Always pay attention to shifting sounds to detect and fix issues early.

Was this review help?
10
Share
Expand All
More Q&A

What Phenomena Can Be Caused by Excessive Engine Oil?

Excessive engine oil in a car can lead to the following phenomena: 1. It reduces the engine's output power. When the engine is running, the crankshaft and connecting rod big end move rapidly. If there is too much oil, the crankshaft and connecting rod will churn the oil violently. This churning consumes a certain amount of energy, which indirectly reduces the engine's output power and increases fuel consumption. 2. It causes the engine's exhaust pipe to emit blue smoke. Excessive oil will inevitably lead to oil splashing due to the rapid movement of the crankshaft and connecting rod big end. A large amount of splashed oil can enter the combustion chamber and burn, resulting in blue smoke from the exhaust pipe, commonly known as "oil burning." "Oil burning" is also a method to determine excessive fuel consumption. 3. It can cause piston ring seizure, fuel injector clogging, and other faults. A large amount of oil entering the combustion chamber can burn and form carbon deposits on the piston rings, piston top valve seats, and fuel injectors. This can lead to piston ring seizure, fuel injector clogging, and increased wear between the piston and cylinder. Additionally, excessive carbon deposits can cause engine knocking. 4. It can easily lead to crankcase explosion. Excessive oil levels can generate oil vapor when churned by the connecting rod big end. This vapor can ignite when exposed to high temperatures, causing a crankcase explosion, which is a severe consequence. 5. It can cause oil leakage. Excessive oil increases the pressure in the lubrication system, making oil seals more prone to damage and leading to oil leakage. Leakage, especially at the front and rear ends of the crankshaft, increases oil consumption, pollutes the environment, and complicates maintenance. 6. It increases wear and reduces lubrication performance. The crankshaft churns the excessive oil, which not only splashes the oil but also creates air bubbles. Oil with bubbles entering the lubrication system can cause wear on the cylinder and piston. 7. It can lead to oil degradation and reduced performance. Excessive oil is easily heated when churned by the crankshaft, causing the oil to degrade and lose its performance. Therefore, adding too much oil is not beneficial, and it is best to drain some out.
114
Share

Can Driving Charge the Battery?

Driving can charge the battery. The engine directly drives the alternator via a belt. Once the engine starts, the alternator begins working. The electricity generated by the alternator undergoes rectification and voltage stabilization. Therefore, as long as the engine is running, even at idle speed, the battery is being charged. When the battery is depleted, it requires charging at a voltage slightly higher than the rated voltage, typically between 12-14V. The voltage produced at idle speed is slightly lower, which is not ideal for fully charging the battery. The battery can be fully charged when the engine speed exceeds 1200 RPM, but this takes a considerable amount of time. Generally, driving in third gear or higher can gradually restore the battery charge, eliminating the need to rev the engine while stationary. A fully charged battery can be identified by the following indicators, or by observing the battery's eye turning green: 1. A large number of bubbles form inside the battery, creating a "boiling" effect; 2. The terminal voltage rises to its maximum level and does not increase further for two hours; 3. The electrolyte level rises to its highest point and does not increase further for two hours.
108
Share

What is the Besturn X40 carbon canister assembly?

Besturn X40 carbon canister is actually part of the Evaporative Emission Control System (EVAP), which was introduced to prevent fuel vapors from escaping into the atmosphere after the engine stops running. After the engine is turned off, gasoline vapors mix with fresh air in the canister and are stored in the activated carbon canister. When the engine starts, the solenoid valve installed between the activated carbon canister and the intake manifold opens, and the gasoline vapors in the activated carbon canister are drawn into the cylinders by the vacuum in the intake pipe along with clean air for combustion. This not only reduces emissions but also lowers fuel consumption. Since activated carbon has adsorption capabilities, when the vehicle is running or turned off, gasoline vapors from the fuel tank enter the upper part of the activated carbon canister through pipelines, while fresh air enters from the lower part of the activated carbon canister. After the engine is turned off, gasoline vapors mix with fresh air in the canister and are stored in the activated carbon canister. When the engine starts, the solenoid valve of the fuel evaporation purification device installed between the activated carbon canister and the intake manifold opens, and the gasoline vapors in the activated carbon canister are drawn into the intake manifold for combustion.
113
Share

Which Steering Wheel Cover is Anti-Slip?

Choosing a hand-stitched genuine leather steering wheel cover not only protects the steering wheel from wear but also enhances grip and friction, preventing slippage due to sweaty hands. This improves the responsiveness and safety of the vehicle while driving and also helps reduce vibration absorption. 1. The biggest drawback of steering wheel covers is slippage. Even the most tightly fitted products can affect control to some extent. Therefore, when selecting a steering wheel cover, choose one with high inner friction that won’t slip after installation. 2. The surface of the steering wheel cover should not be too slippery. Materials like long fur or linen can easily cause slippage and make it hard to grip. Additionally, before use, check the craftsmanship of the steering wheel cover’s surface for any hard threads or stiff folds to avoid scratching your palms during use. 3. Opt for a Hand-Stitched Genuine Leather Steering Wheel Cover Hand-stitched genuine leather steering wheel covers are significantly different from the common fluffy covers that require rubber fasteners. The key difference is that they are truly fixed to the steering wheel, with no relative displacement. During the stitching process, the cover is tightly secured to the steering wheel, ensuring a perfect fit and preventing slippage.
116
Share

Essential Maintenance Items for Volkswagen Lavida at 20,000 Kilometers

Generally speaking, the 20,000-kilometer maintenance is a major service for a car, typically being its third maintenance. Routine items include changing the engine oil, oil filter, air filter, cabin air filter, spark plugs, etc. Replacing the engine oil and oil filter is essential. Under the harsh conditions of high temperature and high pressure inside the engine, the shelf life of engine oil is significantly shortened, and its performance deteriorates substantially. Over time, it fails to protect the engine effectively. The oil filter prevents impurities from mixing into the oil, which could cause oxidation, leading to the formation of sludge and clogging the oil passages. Both the engine oil and oil filter should be replaced simultaneously. The air filter serves to block dust and particles from being sucked into the engine during the intake process. If the filter is not cleaned for a long time, dust can enter the engine, causing abnormal wear on the cylinder walls. If it wasn't replaced during the 10,000-kilometer maintenance, it must be replaced at the 20,000-kilometer service. If the car uses standard material spark plugs, preparations should be made to replace them at the 20,000-kilometer mark. Spark plugs directly affect the engine's acceleration performance and fuel consumption. When you feel a lack of engine power while driving, maintenance should be performed. The service life of spark plugs varies depending on their material.
106
Share

Why does the oil light stay on in the 2008 Kawasaki Z1000?

Reasons: 1. Insufficient oil level, which reduces the oil pump's output or causes air intake, leading to a drop in oil pressure; 2. Overheating of the engine, which thins the oil, causing it to leak excessively through the gaps and resulting in reduced oil pressure; 3. Damage or excessive wear and assembly gaps in the oil pump components, which can prevent the oil pump from delivering oil or cause insufficient oil output; 4. Improper clearance between the crankshaft and the main or connecting rod bearings—too tight increases oil pressure, while too loose decreases it; 5. Oil leaks or blockages in the oil lines. II. Fault Diagnosis and Repair 1. If the oil level is insufficient, the oil pump's output will decrease or fail to pump oil due to air intake, leading to a drop in oil pressure. This can accelerate wear on the crankshaft, bearings, cylinder liners, and pistons due to poor lubrication. Therefore, check the oil level in the oil pan daily and top up with the same brand and type of oil if necessary. 2. Oil Pump Wear Excessive wear in the clearance between the oil pump shaft and bushings, gear end face and pump cover, or gear side/radial clearance can reduce oil output and pressure. Replace worn parts and resurface the pump cover to restore the clearance to standard specifications. 3. Engine Overheating Excessive scale in the cooling system, poor heat dissipation, prolonged overload operation, or delayed fuel injection timing can cause engine overheating, accelerating oil degradation, thinning, and leakage through gaps, reducing pressure. Remove scale, adjust injection timing, and operate the engine within rated load limits. 4. Increased Clearance in Main/Connecting Rod Bearings Long-term use increases the clearance between the crankshaft and bearings, raising leakage and lowering oil pressure. Every 0.01mm increase in clearance reduces pressure by 0.01MPa. Regrind the crankshaft and replace bearings to restore proper clearance. 5. Oil Cooler Leakage External leaks contaminate the engine surface and reduce pressure; internal leaks allow oil into the radiator, impairing cooling efficiency, causing overheating, oil thinning, and pressure loss. Remove the cooler for repair or replacement to restore functionality. 58 Auto
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.