What to Do When Your Driver's License is Deducted 12 Points?

What to Do When the Front Windshield Fogs Up with AC On?

Press the defog button, turn on the air conditioning (A/C) switch, set the temperature to the lowest, and switch to external circulation to defog. Both cold and warm air can be used to defog the windshield, but warm air is slower than cold air. The most effective method is using cold air, which blows dry cold air directly onto the glass, preventing water vapor from condensing and achieving defogging. The method for warm air defogging is the same as cold air, but note that warm air should not be used on rainy days as it may initially worsen the fog. Always use external circulation when defogging the windshield. The reason for windshield fogging: There is a temperature difference between the inside and outside of the car. If the temperatures differ, the side with the lower temperature will have a lower saturated vapor pressure on its surface compared to the surrounding environment, causing water vapor to gather on the glass and form tiny droplets, resulting in fog. Methods to defog the windshield: Air Conditioning Cooling: Use the air conditioning's dehumidification function to reduce air humidity and remove fog. In summer, especially when multiple people enter the car without turning on the AC, the exhaled humid air can quickly fog up the windshield. Turn on the AC to blow cold air onto the windshield, using its dehumidification function to quickly remove the fog. If humidity is too high and the AC is ineffective, slightly open the windows to rapidly reduce cabin humidity. Combining this with the AC can speed up the process. Air Conditioning Heating: Reduce fogging by minimizing the temperature difference. In winter, blowing warm air onto the glass quickly raises its temperature, reducing the difference between the inner and outer surfaces and preventing heavy fogging. However, the rear and side windows heat up more slowly, requiring more time to fully defog. Whether using automatic or manual AC, turning it on aids dehumidification. Avoid setting the AC to the coldest temperature, as prolonged use can cause frost to form on the outer windshield. Applying Anti-Fog Agents: Spray a small amount of defogging agent on the windshield and wipe it clean to remove dirt and stains. This leaves a transparent protective film that prevents water vapor from condensing, especially useful in cold winters. Alternatives like dish soap, soapy water, glycerin, alcohol, or saline can be applied, left to dry, and then wiped with a soft cloth to keep the windshield fog-free for days. Opening Windows for Airflow: If the fog is light, open the side windows to create airflow between the inside and outside, reducing the temperature difference and gradually eliminating the fog. This method works similarly to using cold air. However, it’s impractical during rain, snow, high-speed driving, or heavy fog. Rear Windshield Heating: Most cars have a rear windshield heating function, with varying button locations but the same effect. Turn on the heating switch, and the fog will disappear in about a minute.

110

Share

How to Reset the Maintenance Light on Besturn X40?

The method to reset the maintenance light on Besturn X40 is as follows: 1. Use the universal diagnostic tool TECH2 for resetting. 2. Manually reset using the buttons on the right side of the dashboard. The specific steps are: (1) Turn off the ignition switch. (2) Press and hold both arrow buttons simultaneously, then turn on the ignition switch. (3) Release both arrow buttons after about 3 seconds. (4) The maintenance menu will appear, asking if you want to reset. (5) Press and hold the SET (reset) button for more than 3 seconds. (6) Press the MODE button. (7) Turn off the ignition switch to complete the reset.

105

Share

How to Fix the Airbag Warning Light Displayed on the Car?

Solutions for the airbag warning light being on: 1. During engine self-check, the indicator light will illuminate, but it will turn off once the self-check is completed, typically within about 5 seconds. This is a normal phenomenon. 2. False fault. After all, the airbag is controlled by circuits, and there are many reasons that can cause the airbag light to come on. For example, if the battery is severely depleted, the airbag may send a signal indicating low voltage for a specific airbag, generating a fault code. In this case, simply clearing the code will suffice. 3. Genuine faults involve a variety of possible causes, such as airbag failure, airbag clock spring failure, collision sensor failure, loose airbag connectors, or circuit breaks. It is necessary to promptly use a diagnostic tool to read the fault code, locate the fault point based on the code, and resolve the issue.

111

Share

What is the purpose of a balance shaft?

The function of a balance shaft is to balance and reduce engine vibrations, thereby achieving the goals of lowering engine noise, extending service life, and enhancing passenger comfort. Balance shaft technology is a structurally simple yet highly practical engine technology, which can be categorized into single and double balance shafts. The method for aligning a balance shaft is as follows: 1. Align the timing mark on the shaft sprocket with the copper-plated chain link. 2. Place the timing chain on the water pump drive sprocket. 3. Adjust the last chrome-plated chain link so that the timing mark on the exhaust-side balance shaft drive sprocket aligns with it.

117

Share

What are the differences between BYD Song Pro and Song?

The differences between BYD Song Pro and Song are: 1. Different front grilles: The BYD Song Pro features chrome horizontal bars with a larger grille shape, while the Song adopts an irregular zigzag pattern design. 2. Different wheel rims: The BYD Song Pro uses a blade-shaped ten-spoke rim, whereas the Song employs a branch-like five-spoke rim. 3. Different taillights: The BYD Song Pro has downward-protruding integrated taillights, while the Song features upward-protruding integrated taillights. Both the BYD Song Pro and Song share a 5-door, 5-seat SUV body structure, with both models utilizing MacPherson strut front suspension and multi-link independent rear suspension.

106

Share

Does the car's OFF indicator on the dashboard mean on or off?

OFF in a car indicates that something is turned off, while ON means it is turned on. The OFF light on a car mainly refers to ESP-OFF, where ESP stands for Electronic Stability Program, an active safety device designed to prevent the vehicle from skidding or fishtailing. There are several other buttons in a car: 1. The "SEL" button is a menu selection confirmation button, usually located on the multifunction steering wheel. 2. The "AC" button is the compressor switch, which controls the air conditioning cooling. 3. "MUTE" is the mute button, allowing for instant muting. 4. "MODE" is the mode switching button. 5. "SET" on the multifunction steering wheel is the cruise control function button.

102

Share