
If the car has a keyhole, you can use the mechanical key to start the vehicle. If not, the entry and smart start system warning light will illuminate, and a buzzer in the vehicle will sound once. Within 30 seconds after the buzzer sounds, bring the electronic smart key close to the "Start/Stop" button, and the buzzer will sound again to prompt starting the engine.

















As a seasoned driver for many years, I've encountered the issue of a dead key fob battery several times. Typically, the key uses a CR2032 coin cell battery, which is quite easy to replace yourself. First, use a small screwdriver or coin to gently pry open the back cover, being careful not to damage the plastic clips. Remove the old battery, noting the positive and negative orientation, and replace it with a new one in the same position. After securing the cover, test the unlock button—if the red light turns on, you're good to go. Even with a dead BYD key fob, you can still start the car in an emergency: locate the lock cylinder on the door, use the physical key to unlock it, then place the smart key close to the start button inside the car for a few seconds to ignite the engine. For prevention, I recommend checking the battery annually or keeping a spare in the car. Older vehicles may have shorter battery life, but replacement costs just a few bucks—though dealerships might charge more. In short, it's not a major issue, but addressing it early avoids being stranded.

When a car, the salesperson taught me how to deal with a key fob battery replacement. My BYD key fob makes it very easy to change the battery. The model is usually CR2032, which can be purchased at supermarkets or hardware stores. The steps are simple: Look for a gap along the edge of the key fob, gently pry open the back cover without using too much force, replace the battery ensuring the positive side faces upward. Close the cover and test the remote functions. If unsure about the battery model, refer to the owner's manual or visit a BYD dealership for a free check. As a preventive measure, replace the battery every two years or so. When the key fob battery is dead, you can still operate it, such as using the physical key to open the door, and then placing the key fob near the induction area (like the cup holder) to start the car. I believe regular maintenance can save a lot of hassle and time.

I often help my family with car issues. Replacing the in a BYD key fob is quick. Purchase a CR2032 coin cell battery and do it yourself: pry open the back cover and replace it. Test the remote to ensure it works properly. To prevent malfunctions, replace the battery every 1-5 years as a precaution.

As a practical car owner, don't panic when your key fob runs out of power. Most key fobs use CR2032 batteries, which can be replaced by prying open the case. In emergencies, you can use the physical key to unlock the door and the induction start. After replacing the battery, I used a multimeter to test the voltage to ensure stability. For daily prevention, remember not to expose the key fob to high temperatures.

I've replaced the in my BYD key fob a few times. Simple method: Use a tool to pry it open and install a new CR2032 battery. Test if the light turns on, then you're good to go. When the battery dies, the physical key can unlock the door, and you can still start the car via keyless ignition. I make it a habit to check the battery health every two years to avoid unexpected issues.


