What to Do When the Vehicle Alerts for Excessive Tire Pressure?

2 Answers
JoelFitz
08/26/25 5:04am
Solutions for vehicle alerting excessive tire pressure: Upon noticing the tire pressure alert, first turn on the hazard lights, gradually slow down, and after ensuring safety, pull over to the right side of the road. Then, rule out false alarms, and finally, change the tire or call for assistance. There are four main reasons in daily life that may trigger a tire pressure alert: 1. A punctured tire or air leakage; 2. Failure to reset the tire pressure settings after replacing or repairing a tire; 3. Failure to reset the tire pressure settings after inflating the tire; 4. The car has been parked for a long time without being driven. According to international standards and requirements: standard tires should be between 2.4 to 2.5 bar; reinforced tires should be between 2.8 to 2.9 bar, and should not exceed 3.5 bar. Air pressure is the lifeline of a tire; both too high and too low pressure will shorten the tire's lifespan.
Was this review help?
5
5
Share
LaylaFitz
09/08/25 6:56am
I've been driving for decades and have encountered tire pressure warning alerts many times. The common causes are sudden hot weather causing tire expansion or over-inflation at gas stations. In such cases, don't rush to continue your journey. Find a safe place to park, turn off the engine, and let the tires cool naturally for a few minutes before checking. If you confirm the pressure is too high, use the onboard tire pressure gauge to measure it - the manufacturer's standard is usually indicated on the door label. If it's high, slowly release some air, but avoid releasing too much at once to prevent dangerously low pressure. High tire pressure during highway driving is particularly hazardous, increasing the risk of blowouts, damaging tires, and wasting fuel. Afterwards, make it a habit to check tire pressure monthly with simple tools, especially during seasonal temperature changes. If this happens frequently, there might be an issue with the tire pressure monitoring system, and it's best to have it checked at a professional shop.
Was this review help?
5
2
Share
Expand All
More Forum Discussions

What are the symptoms of a bad CV joint?

Symptoms of a bad CV joint include regular abnormal noises during normal steering or when driving over bumps. In severe cases, it may lead to loss of power and deviation from the intended driving direction. The CV joint is located in the car's chassis, connecting the driveshaft to the wheels, and its key role is to transmit power to the wheels. Below are some maintenance methods for CV joints: 1. Avoid starting in high gear; 2. Avoid abruptly engaging or disengaging the clutch; 3. Avoid overloading and speeding; 4. Regularly check the connection points of the CV joint for any abnormalities and ensure the dust cover is intact.
14
2
Share

How to Deal with Black Paint Scratches on a White Car?

When black paint gets scratched onto a white car, the specific situation and solutions are as follows: 1. Dirt adhesion: If the black marks are merely dirt adhering to the paint surface, simply washing and wiping them off will suffice. 2. Exposed primer: If the scratch has removed the surface paint of the car, in minor cases, you can use a touch-up pen to repair it yourself. For more severe cases, sandpaper can be used to sand off the paint at the scratched area, followed by repainting. 3. Deformation: If the impact is particularly severe and causes deformation of vehicle parts, it is necessary to visit a 4S shop or repair shop for professional repair by specialists.
15
0
Share

What Causes the Anti-Slip Warning Light to Illuminate?

Main reasons for the anti-slip light illumination: 1. Accidental pressing of the ESP OFF button, manually deactivating the anti-slip system. 2. Software issues causing poor signal transmission. 3. Fuse blown or circuit short. 4. Poor contact or malfunction at sensor interfaces. 5. ABS pump failure. There are two methods to clear the anti-slip light: 1. Restart the engine and briefly press the ESP OFF button to check if the anti-slip system was manually deactivated. 2. Visit a 4S dealership for inspection, diagnose the fault cause, and use a diagnostic scanner to clear the trouble codes after repair.
19
4
Share

How to open the fuel tank cap of Buick GL8?

Buick GL8's fuel tank switch is located under the driver's seat in the main cockpit. Simply pull the switch outward by hand to open the fuel tank cap. More information about Buick GL8 is as follows: 1. Buick GL8 is positioned as a medium-sized MPV, and all models meet the China VI B emission standards. 2. In terms of power, Buick GL8 is equipped with a 2.0-liter inline 4-cylinder turbocharged engine, matched with a 6-speed automatic manual transmission, with a maximum power of 191KW and a maximum torque of 350N·m. The fuel supply method is all direct injection.
6
4
Share

Is removing a tire clockwise or counterclockwise?

Removing a tire is counterclockwise, while installing a tire is clockwise. When tightening the wheel nuts onto the studs, it's not about the depth but rather the torque value. Different specifications and grades of bolts and nuts have specified torque range values. Simply tighten according to the bolt's grade, and the vehicle can operate normally. Tires are circular elastic rubber products assembled on various vehicles or machinery for ground rolling, typically mounted on metal rims. They support the vehicle body, cushion external impacts, ensure contact with the road surface, and maintain the vehicle's driving performance. Tires are often used under complex and harsh conditions, enduring various deformations, loads, forces, and temperature extremes during operation. Therefore, they must possess high load-bearing capacity, traction performance, and cushioning properties.
19
4
Share

What does car cornering light mean?

Car cornering lights refer to the feature where the vehicle's headlights (or fog lights) can rotate a certain angle in the direction of the turn to expand the field of vision. Standard headlights have blind spots during turns, making pedestrians in these areas difficult to notice and potentially leading to hazards. This equipment primarily enhances nighttime driving safety. There are two common types of cornering auxiliary lighting: one is fog light-assisted steering, where the fog light on the same side illuminates when the headlights are on and the vehicle is turning, and automatically turns off when the turn is completed. The other is dynamic headlights, which adjust their angle based on the vehicle's turning direction to ensure safety in blind spots during curves.
10
1
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.