···
Log in / Register

What Causes the Rear Wheels to Stop Turning After Starting the Car?

1Answers
LaAlan
09/08/2025, 03:09:35 AM

Two possible reasons: either the brake pads and discs are stuck with foreign objects, causing dragging brakes accompanied by abnormal friction noises, or the brake caliper lacks oil or is damaged, preventing separation and resulting in dragging brakes. Below are detailed explanations about car tires: Types of Tires: Pneumatic tires are categorized into tube tires and tubeless tires based on their structure. Passenger cars commonly use tubeless tires. Depending on the arrangement of the internal cord layers and buffer layers, tires can also be divided into radial tires and bias-ply tires. Radial tires are widely used in vehicles. The sidewalls of tires are labeled accordingly. Functions of Tires: Tires directly contact the road surface and, together with the car's suspension system, help absorb shocks during driving, ensuring good ride comfort and smoothness. They also maintain strong adhesion between the wheels and the road, improving traction, braking, and off-road capability. Additionally, tires bear the weight of the car.

Was this review help?
103
Share
More Q&A

What does illegal removal of OBU mean?

Illegal removal of OBU refers to a situation where the lane system displays a U-turn or overtime vehicle, and the automatic deduction or swiping of the card to deduct the fee from the card will not be possible. In such cases, the toll should be paid in cash. Below is some relevant information about OBU: 1. Concept: It stands for On-Board Unit, which is a microwave device using DSRC technology to communicate with RSU. 2. Limitations: The in-vehicle application environment is quite harsh, so the performance requirements for in-vehicle equipment are higher than those for general electronic devices. When designing intelligent transportation systems, it is particularly important to consider the application environment to ensure the system can adapt to the in-vehicle environment and leverage it to create greater value than general systems.
119
Share

What is the difference between E and F driving licenses?

The differences between E and F driving licenses are as follows: 1. Different permitted vehicle types: The E license allows driving two-wheeled motorcycles with an engine displacement over 50ml or a maximum design speed exceeding 50km/h; The F license permits driving light motorcycles with an engine displacement under 50ml and a maximum design speed not exceeding 50km/h. 2. Different driving scopes: The E license can drive both regular two-wheeled motorcycles and the light motorcycles permitted by the F license; The F license can only drive light motorcycles, with no other permitted vehicle types. 3. Different license plate colors: E license plates are yellow; F license plates are blue. 4. Different examination requirements: The E license test vehicle must be a regular two-wheeled motorcycle with at least four speed gears; The F license test vehicle requirements are formulated by the provincial traffic management department of the public security authority.
118
Share

Where to Maintain a Jetta After Purchase?

Jetta vehicles should be maintained at Jetta 4S stores or auto repair shops and cannot currently be serviced at Volkswagen 4S stores. In fact, getting maintenance done anywhere will not affect the owner's "Three Guarantees" rights. China's Three Guarantees policy does not explicitly link maintenance outside 4S stores with the Three Guarantees services. The policy states that as long as maintenance is performed according to the manufacturer's requirements, the warranty remains valid, and any quality issues during the warranty period can be covered by the Three Guarantees. If a component unrelated to maintenance fails, there is no issue with receiving Three Guarantees services. However, in practice, if engine problems arise and the warranty-period maintenance was not performed at a 4S store, claiming Three Guarantees services can be somewhat troublesome. The following situations are not covered by the Three Guarantees but may be eligible for paid repairs: 1. Damage caused by improper use, maintenance, or storage by the consumer; 2. Damage caused by unauthorized disassembly by non-authorized repair providers; 3. Lack of a valid Three Guarantees certificate or purchase invoice; 4. Discrepancy between the product model on the Three Guarantees certificate and the repaired product, or if the certificate has been altered; 5. Damage caused by force majeure.
112
Share

What Causes the Clicking Noise in the Front Axle of FAW J6P?

Body noise, engine compartment noise, etc. Here are the specific details: 1. Body Noise This issue is usually caused by insufficient body rigidity, leading to deformation of the vehicle during driving, resulting in friction or shaking between the doors and the frame, or friction between steel plates due to loose welds. Applying adhesive strips on the doors and windows or placing rubber pads in the friction areas may reduce or eliminate the noise, but these are temporary fixes. Some vehicles have significant wind noise, which is related to their design. If no additional items have been added, the owner should not attempt to resolve it themselves. Additionally, loose fastenings between body components can also cause noise, which can usually be fixed by tightening the screws. 2. Engine Compartment Noise: There are several possible causes for noise here. A high-pitched belt squeal is usually due to belt slippage. If there is a dry metal friction sound when the engine is running, it often indicates damage to the bearings of the generator, water pump, or power steering pump. A hissing sound during engine operation may suggest a blocked exhaust system or a leaking/broken vacuum tube. It's important to note that if the noise originates from inside the engine, the owner likely cannot fix it themselves, and it's best to take the vehicle to a repair shop. 3. Transmission Noise: If there is a "rustling" sound from the transmission while driving, which disappears when the clutch is pressed, it indicates a transmission issue, possibly due to worn bearings or gears, or bearing spots. 4. Tire Noise: Tire noise is always rhythmic, and its frequency increases with speed. A dull "thudding" sound often indicates tire tread deformation, bulging, severe wear, or insufficient pressure. A "tapping" sound may be caused by small stones stuck in the tread. If the tire makes a "whooshing" sound accompanied by noticeable body shaking or steering deviation, it's almost certainly a tire blowout, and the tire should be replaced immediately.
118
Share

Why is the left headlight lower than the right one?

Don't worry about it being a headlight malfunction - this situation is actually quite normal. According to legal regulations, the low beam of car headlights should be lower on the left side and higher on the right side. If the lights were perfectly aligned horizontally, that would indicate a problem. Here's some relevant information: 1. Headlights: Vehicle lights refer to the lamps on a vehicle, serving as illumination tools for nighttime road driving and signaling devices for various vehicle movement indications. 2. Classification: Vehicle lights are generally divided into headlights, taillights, turn signals, etc. 3. Maintenance: The "soul" of headlights is their bulbs, whose performance affects nighttime illumination effects and directly relates to driving safety. Therefore, using high-quality headlight bulbs is essential to ensure safety.
105
Share

Is the 2021 Focus equipped with a four-cylinder engine?

The 2021 Focus does not feature a four-cylinder engine. It offers a 1.5L three-cylinder and a 1.5T inline three-cylinder engine. Below are the specific drawbacks of three-cylinder engines: 1. Higher costs: Both manufacturing and maintenance costs are higher compared to conventional four-cylinder engines. To achieve high output with small displacement and address the strong vibrations caused by structural asymmetry, many new technologies are required. 2. Higher vibration levels: The unbalanced working state makes it more prone to vibrations. Due to the unequal number of cylinders on each side of the engine, it is more likely to experience shaking during operation, and the engine noise may also be louder. Although balance shaft technology is used to mitigate excessive vibration, the vibration levels are still higher than those of four-cylinder or six-cylinder engines. 3. Lower acceleration performance: Smaller intake volume results in generally weaker starting and acceleration performance. Compared to a four-cylinder engine, having one less cylinder leads to a reduced intake volume, which also limits acceleration performance during the initial stage.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.