···
Log in / Register

What to Do When the Trunk of Wuling Hongguang S Won't Open?

6Answers
Jaden
07/24/2025, 03:47:47 PM

Enter the trunk through the emergency escape hatch and manually unlock it by pulling the unlocking lever with your hand. The trunk may not open due to issues with the linkage rod or the lock cylinder. It is recommended that the owner use the emergency trunk release from the rear seats. Afterward, promptly visit a 4S shop or a professional repair shop to replace the lock cylinder or the lock rod.

Was this review help?
104
Share
DelJackson
08/10/2025, 05:08:38 AM

I had a similar issue with my Wuling Hongguang S before - the trunk suddenly wouldn't open, which was really frustrating. Common causes could be a stuck latch or remote control failure. You can try using the physical key first, since S-model trunks often use mechanical locks to avoid body damage from forced pulling. Next, check the key remote: replace the battery if dead, or try moving away in case of signal interference. For electric components, it might be a blown fuse - look for number F15 or similar in the fuse box under the driver's seat and replace it. Lubricating the lock cylinder also helps - spray some anti-rust oil and wait a few minutes. Finally, check for debris blocking the trunk seam. If nothing works, don't force it - head to a repair shop immediately to avoid travel delays or bigger malfunctions.

Was this review help?
17
Share
Expand All
ColtonLee
09/26/2025, 12:17:17 AM

As a fellow car enthusiast who often works on my own vehicle, I recommend starting with the key: first try using the spare key to rule out a remote battery issue. If that doesn't work, check the trunk's exterior handle and interior pull cord for any sticking or rust, and apply lubricant if needed. The Wuling Hongguang S has a simple electrical system, so inspect if the trunk fuse is blown—locate the corresponding fuse in the driver's side fuse box, and replacement takes just minutes. If you hear the motor but the trunk won't open, test the wiring connections or check for relay failure. Don't forget to wear safety gloves to prevent electric shock. For older vehicles, lock mechanism wear is common, so regular maintenance with lubricant spray can help prevent issues. These DIY steps can resolve most situations, saving you money and time.

Was this review help?
10
Share
Expand All
DelAmir
11/09/2025, 01:21:01 AM

When I first drove the Wuling Hongguang, I also encountered a trunk jam. Don't panic. First, make sure the vehicle is unlocked—sometimes forgetting to remove the key can prevent the button from working. The S-series mostly has mechanical locks, so try pulling the handle. If there's any unusual noise, it might be due to cold weather freezing or dust buildup; try using a hairdryer or cleaning the edges. As a backup, fold down the rear seats to access your items in an emergency. The operation is simple—avoid forcing it open to prevent scratching the paint. A quick repair at the 4S shop usually handles minor issues.

Was this review help?
20
Share
Expand All
LaJulianna
12/30/2025, 03:05:49 AM

I've seen many Wuling Hongguang S owners on car forums complaining about the trunk not opening, mostly due to remote control failure or water ingress causing rust in the lock cylinder. Try spraying WD-40 as a lubricant and wait half an hour to see if it works. For electric tailgates, restart the vehicle system by turning off the engine and waiting a few minutes before trying again. Safety first—don't force it open on the roadside; seek help or visit a professional shop. For long-term maintenance, regularly lubricate the lock mechanism and keep the trunk dry and clean to prevent recurrence of the issue.

Was this review help?
3
Share
Expand All
McMorgan
03/27/2026, 10:17:37 PM

To address the issue of the Wuling Hongguang S trunk not opening, start with the remote control: Insufficient battery power is often overlooked—replace it and observe the response. If there's no reaction, check for signal interference sources. On the mechanical side, feel for resistance when pulling the handle to identify any jamming, and apply lubricant promptly for maintenance. A blown fuse is a common issue—refer to the manual to locate the trunk circuit fuse and replace it quickly. If the electric system produces a humming sound but doesn't operate, test the wiring connections. Regularly clean the trunk door seams; the Wuling Hongguang's simple structure benefits from maintenance to extend its lifespan. If the problem persists, seek professional repair immediately to ensure driving safety.

Was this review help?
8
Share
Expand All
More Q&A

How to Drain the Windshield Washer Fluid in a Sagitar?

The method to drain the windshield washer fluid in a Sagitar: Open the front hood of the car. There is a blue cap located at the lower left of the engine with a water spray pattern on it - this is where you add windshield washer fluid. It is recommended to use purified water mixed with a small amount of windshield washer fluid. Simply refill when it runs out during normal use. Windshield washer fluid is a liquid used to clean the windshield of vehicles and other transportation tools. It is a consumable item in automotive use, mainly composed of water, alcohol, and ethylene glycol, with functions such as cleaning, antifreeze, and antifog. In terms of body dimensions, the Sagitar measures 4753mm in length, 1800mm in width, and 1462mm in height, with a wheelbase of 2731mm.
110
Share

Is the Wuling Rongguang V exempt from inspection for six years?

The Wuling Rongguang V is not exempt from inspection for six years. As a minivan, the Wuling Rongguang V is not covered by the new regulations and is still subject to the original annual inspection requirements. The Wuling Rongguang V is a commercial vehicle produced by Wuling, equipped with 1.2L and 1.5L engines to meet business reception needs. It features a rear solid axle suspension system, with a design more focused on cargo capacity. In terms of dimensions, the Wuling Rongguang V measures 4415mm in length, 1685mm in width, and 1850mm in height, with a wheelbase of 2720mm. Exterior color options include Emerald Black, Mysterious Black, Tungsten Gray, Topaz Brown, Coral Red, and Pearl White.
102
Share

How to Select Driving Modes on the CS75PLUS?

CS75PLUS is equipped with 58 driving mode switching options, offering three driving modes: Normal Mode, Eco Mode, and Sport Mode. The instrument panel changes color according to the selected driving mode. Eco Mode is suitable for highway cruising. In Normal Mode, the throttle pedal response is moderate, providing linear acceleration that is easy to control. When switched to Sport Mode, the throttle pedal resistance decreases, making it easier to press deeply, while the steering wheel resistance increases for more precise directional control. In terms of dimensions, the CS75PLUS measures 4670mm in length, 1865mm in width, and 1700mm in height, with a wheelbase of 2710mm.
109
Share

How to Repair P0132 Trouble Code?

p0132 trouble code repair method: First inspect the wiring harness of the pre-catalytic converter oxygen sensor, replace the pre-catalytic converter sensor and engine control module, then clear the fault according to the trouble code. The P0132 trouble code applies to all automobile manufacturers and represents high voltage in the oxygen sensor circuit. The function of the oxygen sensor is to measure the oxygen content in the engine exhaust to adjust the fuel injection volume, thereby enabling the engine to achieve an optimal air-fuel ratio. Its core component is a porous ZrO2 ceramic tube, which is a solid-state electrolyte with porous platinum electrodes sintered on both sides. At a certain temperature, due to the difference in oxygen concentration on both sides, oxygen molecules on the high-concentration side are adsorbed on the platinum electrode and combine with electrons to form oxygen ions O2, making this electrode positively charged. O2 ions migrate through oxygen ion vacancies in the electrolyte to the low-oxygen-concentration side, making that electrode negatively charged, thus generating a potential difference.
120
Share

What are the symptoms of a faulty motorcycle carburetor?

Common symptoms of a faulty motorcycle carburetor: 1. Carburetor backfire; Backfire occurs in two situations: one is during startup, when a "popping" sound comes from the air cleaner, accompanied by a puff of white smoke, and the engine is difficult to start; the other is when the engine is running, and a sudden "popping" sound comes from the air cleaner. 2. Carburetor throttle knocking sound; The throttle continuously moves up and down in the mixing chamber body. Due to excessive wear leading to excessive clearance, during the engine intake stroke, the airflow impact causes the throttle to produce radial swing and hit the mixing chamber body, resulting in a "clicking" sound. This sound is almost inaudible at idle speed, becomes loudest when the throttle is turned to 1/4 open, gradually decreases as the throttle is opened further, and disappears when the throttle is fully opened. 3. Foreign matter adhering to the contact surface of the needle valve and valve seat; The needle valve and valve seat control the fuel intake, requiring strict sealing and high surface smoothness. If foreign matter adheres to the contact surface, it will cause the needle valve and valve seat to seal improperly, leading to fuel leakage. Foreign matter mainly refers to impurities and condensed gums in gasoline. To avoid such faults, users should pay attention to regularly cleaning the gasoline filter and using high-quality gasoline. 4. Unstable acceleration transition of the carburetor; The carburetor's idle fuel supply gradually decreases while transitioning to the main fuel supply, which continuously increases. Poor transition manifests as significant engine speed fluctuations or stalling during startup and acceleration as the throttle is opened. 5. Unstable carburetor idle speed. After the engine runs for several minutes to warm up, if the idle speed fluctuation exceeds ±100 RPM, it indicates unstable idle speed.
106
Share

How to use the steering wheel heating in Audi Q5L?

The steering wheel heating switch in Audi Q5L is located at the lower left side of the steering wheel. To activate the steering wheel heating, simply press the switch. It should be noted that not all Audi Q5L models come equipped with steering wheel heating. If this switch is not present, the function cannot be used. The Audi Q5L is a mid-size SUV under the Audi brand, which features two types of engines across its lineup: a low-power version of the 2.0-liter turbocharged engine and a high-power version of the 2.0-liter turbocharged engine. The low-power version delivers 190 horsepower with a maximum torque of 320 Nm, while the high-power version provides 252 horsepower with a maximum torque of 370 Nm. The vehicle measures 4753 mm in length, 1893 mm in width, and 1659 mm in height, with a wheelbase of 2908 mm.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.