···
Log in / Register

What to Do When the BYD Song Battery Runs Out and Fails to Start?

6Answers
DiJohnny
07/29/2025, 08:05:00 AM

There are two solutions when the BYD Song battery runs out and fails to start: 1. Jump-starting: Contact a rescue vehicle, connect the jumper cables, and temporarily charge the battery through the rescue vehicle to start the engine. This is the correct approach. To avoid being unable to charge when the car battery is dead, always keep a set of jumper cables in the car. When connecting the jumper cables, it is crucial not to mix up the connection sequence. First, connect the positive terminal of the dead battery to the positive terminal of the rescue vehicle's battery. Then, connect the negative terminal of the rescue vehicle's battery to a metal part (ground) in the engine compartment of the dead car. After connecting the jumper cables, start the rescue vehicle's engine and slightly increase its RPM. After about 5 minutes, the dead car can be temporarily charged. Once charging is complete, remove the jumper cables in the reverse order of connection. 2. Push-starting or Towing-starting: In the absence of jumper cables, push-starting or towing-starting is the most familiar and effective emergency starting method. However, this should not be used frequently as it may cause some damage to the engine and clutch, especially for automatic transmission vehicles, which should avoid using this method to start.

Was this review help?
103
Share
OliviaAnn
08/13/2025, 05:57:25 PM

I've encountered the situation where my BYD Song couldn't start due to a dead battery several times. It's usually caused by forgetting to turn off the lights when parking or leaving the car unused for extended periods, leading to complete battery drain. My solution is to get a friend's car to help jump-start: take out the jumper cables, connect the red clamp to the battery's positive terminal and the black clamp to the negative terminal, being careful not to cause a short circuit during connection. Wait a few minutes to let the BYD's battery charge slightly before starting the engine. After successful startup, drive for about thirty minutes to recharge the battery. If the battery is over three years old, it might be aging and due for replacement - also check the terminals for corrosion. For prevention: always confirm lights and electronics are off before shutting down the engine; if parking over a week, either start the engine to idle for ten minutes or connect a smart charger to maintain battery level. These simple measures can easily avoid trouble and save on repair costs.

Was this review help?
7
Share
Expand All
LaReagan
10/08/2025, 04:18:14 AM

I often help people deal with car issues, and a dead battery preventing startup is quite common. Don't panic—turn on the hazard lights and pull over safely. It's best to find a familiar driver to bring jumper cables and assist with connecting the positive and negative terminals for a jump-start; be cautious of sparks to avoid burns. If no one is available, use a mobile app to call the insurance company's free roadside assistance service, which usually arrives in about ten minutes. After starting, drive around for half an hour to recharge the battery. For prevention: avoid leaving the car idle for too long—drive short distances twice a week to maintain the charge; inspect the battery for signs of swelling or leakage, and replace it promptly if aging. This method is simple, effective, and saves both hassle and money.

Was this review help?
14
Share
Expand All
HavenRose
11/21/2025, 09:49:35 PM

When the BYD Song battery is dead and fails to start, first check if the headlights or horn are working properly to assess the power level. Using a portable jump starter is the quickest solution: connect red to red (positive terminals) and black to black (negative terminals), ensuring secure contact to avoid shorts. After starting, monitor the dashboard voltage display—normal readings should be above 12.6 volts. If unsuccessful, it may indicate a relay or charging system issue; visiting a repair shop for diagnostic trouble codes is recommended. Prevention tips: Install an in-car voltage monitor with an alarm; regularly measure battery health to maintain a full charge.

Was this review help?
5
Share
Expand All
Duarte
01/11/2026, 11:25:38 PM

I use my BYD Song to take my kids to school. Once, when I returned from a business trip, the battery was dead and the car wouldn't start, which was really frustrating. The reason was that the car had been parked for two weeks without moving, and the battery drained completely. Solution: I immediately called my husband to help jump-start the car with jumper cables; after connecting the cables, we waited a short while and successfully started the engine. If that didn't work, I would have taken a taxi to the supermarket to buy a new battery, which costs around 200 yuan. After starting, drive to a charging station or go for a spin to recharge. I've learned my lesson now: always check all switches before turning off the engine to avoid leaving anything on; if the car is used less frequently, start it once a week and drive for about ten minutes to maintain the battery. Paying attention to details in daily life saves a lot of trouble.

Was this review help?
14
Share
Expand All
VanAshley
04/08/2026, 03:21:30 AM

Don't panic if your BYD Song runs out of battery, prioritize personal and vehicle safety: Pull over to the roadside, turn on hazard lights to avoid obstructing traffic. Contact family or roadside assistance with jump-start tools, always wear insulated gloves during operation for safety. After jump-starting, observe if the battery light turns off indicating normal charging. Common causes include forgetting to turn off lights or aging battery leakage. Preventive measures: Avoid parking for over a week; Keep a portable jump starter in the trunk; Annual maintenance to check battery health and replace when necessary for safety. Sharing this experience helps reduce unexpected risks.

Was this review help?
1
Share
Expand All
More Q&A

Where is the thermostat located on the Geely Emgrand EC718?

The thermostat of the Geely Emgrand EC718 is located in the hot water pipe behind the generator. Introduction to the thermostat: The thermostat is a valve that controls the flow path of the coolant. It is an automatic temperature-regulating device, usually containing a temperature-sensing component that opens or closes the flow of air, gas, or liquid through expansion or contraction. How the thermostat works: The thermostat automatically adjusts the amount of water entering the radiator based on the temperature of the coolant, changing the circulation range of the water to regulate the cooling system's heat dissipation capacity, ensuring the engine operates within the appropriate temperature range. The thermostat must maintain good technical condition; otherwise, it will severely affect the normal operation of the engine.
104
Share

What kind of oil should be added to an air compressor?

Air compressor oil is used in air compressors. The specific introduction is as follows: 1. Types of air compressor oil: According to the design type of compressor oil, environmental conditions, and operating load, the type of air compressor oil is selected. Generally, in long-term high-temperature environments (>30℃), L-DAB oil is selected. For high-speed water-cooled or low-pressure, small compression ratio compressors, low-viscosity compressor oil can be selected. (1) For air-cooled piston-type shaft output power < 20KW, select 32, 46, or 100 grade (environmental temperature < -10℃, 32 grade can be selected) DAA, DAB, or DAC air compressor oil; (2) For water-cooled piston-type, select 68 or 100 grade DAA oil; (3) For oil-drip rotary-type, select 100, 150, or 220 grade DAB or DAC oil; (4) For oil-injection rotary-type, select 32 grade DAG, DAH, or DAJ oil. 2. Function of air compressor oil: The function of air compressor oil is to reduce friction on various types of machinery, protect the machinery and processed parts with liquid lubricants, mainly playing roles such as lubrication, cooling, rust prevention, cleaning, sealing, and buffering. Air compressor oil accounts for 85% of all lubricating materials, with numerous types and grades. The current annual global consumption is approximately 38 million tons.
104
Share

Why is the Everest cheaper than the Explorer?

The Everest is cheaper than the Explorer because they are not the same type of vehicle, with the Explorer offering higher functionality than the Everest. Below are detailed introductions to the Everest and the Explorer: 1. Everest: The Everest is derived from the Ford Ranger pickup truck chassis, featuring a body-on-frame (with a ladder frame) design, making it a true off-road vehicle suitable for rugged, unpaved terrain. If you frequently traverse mountains, construction sites, or engage in wilderness adventures without prioritizing passenger comfort, the Everest is a better choice. The rigidity of its body-on-frame construction is unmatched by urban SUVs. 2. Explorer: The Explorer, on the other hand, is Ford's large urban SUV, a unibody (monocoque) multi-purpose vehicle designed more for comfort on paved roads (highways). If your primary usage is within the city, with occasional trips to slightly rough suburban areas, and you prioritize space and passenger comfort, the Explorer is the superior option.
117
Share

How often should the Focus spark plugs be replaced?

According to the maintenance manual of the Focus spark plugs, they should be replaced every 10,000 kilometers or 30 months. Spark plugs have a service life. Long-term use can lead to carbon buildup. If not replaced regularly, the engine may experience difficulties in starting, insufficient power, increased fuel consumption, and excessive exhaust emissions. If a spark plug fails, the engine cannot function properly, and the car naturally cannot be driven, necessitating timely replacement. Additionally, spark plugs should be replaced based on individual driving conditions. If you notice difficulties in starting the vehicle or if the spark plugs indeed need replacement, you can decide to replace them accordingly. Gasoline engines are equipped with spark plugs, one per cylinder, with some high-speed gasoline engines having two spark plugs per cylinder. Although a spark plug is a small component, it is extremely important. The function of a spark plug is to introduce the high-voltage pulse generated by the ignition coil into the combustion chamber, using the electrode to produce a spark that ignites the air-fuel mixture, completing the combustion process. How spark plugs work: The electrode of the spark plug repeatedly generates electricity to ignite the air-fuel mixture in the cylinder. Meanwhile, other parts of the ignition system produce timed high-voltage pulses, forming sparks and explosions to provide the energy required for the engine's power output. The structure of a spark plug consists of a slender metal electrode passing through a ceramic insulator. The lower part of the insulator is surrounded by a metal shell, which is screwed into the cylinder head. The bottom of this metal shell is welded with an electrode to ground it to the car body. Spark plugs are devices that ignite the mixture of gasoline and air entering the engine combustion chamber. They operate under high-temperature and high-pressure conditions and are one of the vulnerable parts of a gasoline engine. They play a crucial role in the engine's operation, significantly affecting fuel efficiency and smooth operation. Precautions for replacing spark plugs: It is best to replace them when the engine is cold. When removing, pull from the root of the high-voltage line, not directly yanking the wire, as this can easily break the inner core. Also, mark the positions of each cylinder's high-voltage lines before removal to avoid confusion. Before installing new spark plugs, ensure they are compatible with the engine of the vehicle model in question.
107
Share

How long after spraying alcohol indoors can the air conditioning be turned on?

About 10 minutes. Additionally, alcohol should not be used for spraying; it should only be used for wiping. This is because alcohol has an extremely low ignition point, and spraying it can easily lead to fires or explosions if it comes into contact with open flames or static electricity from friction. Therefore, never spray alcohol indoors, in vehicles, or on clothing. Below are some key precautions regarding alcohol use: 1. Ventilate after spraying: It's best to wait at least half an hour after spraying alcohol before turning on the air conditioning. Alcohol has a very low ignition point and can easily ignite upon contact with open flames. After using alcohol, ensure all windows are open for proper ventilation, as it typically evaporates within about 10 minutes. 2. Alcohol should not be sprayed, only wiped: Due to its extremely low ignition point, spraying alcohol can easily cause fires or explosions if exposed to open flames or static electricity. Avoid spraying alcohol indoors or on clothing. 3. Pay attention to concentration: When using 75% alcohol for disinfection, the concentration must be exactly 75%. Concentrations that are too high or too low will affect its effectiveness. Be mindful of the surrounding environment—avoid open flames, smoking, or turning on the air conditioning within half an hour of spraying disinfectant indoors.
115
Share

What Are the Hazards of Using Car Seat Cushions for Height Increase?

The hazards of using car seat cushions for height increase are that during emergency braking, the inertia of the body leaning forward can easily cause the driver to lose stability on the seat and collide with the steering wheel. Women can drive in thin-soled, soft casual shoes or sports shoes, with heels not exceeding 3 centimeters and ankles free to move, allowing easy switching between the accelerator and brake. The following are descriptions of shoes that should not be worn while driving: 1. Flip-flops: Whether they are hard sandals or soft flip-flops, the shoes are not securely fixed to the feet, making it easy for the feet to slip out or for the shoes to get stuck under the floor mat or pedals, affecting braking. 2. High heels: Stiletto heels are particularly dangerous for driving, as they are prone to getting stuck, and the high heels make it difficult to maintain balance and control the pressure applied to the pedals, leading to delays in switching between the accelerator and brake, which is very dangerous. 3. Platform shoes: Fashion-conscious women may prefer thick-soled platform sandals or boots, but these shoes are cumbersome and create a thick 'barrier' between the feet and the pedals. The heels also feel as if they are propped up, making it hard to gauge the pressure applied, resulting in inflexibility when switching between the accelerator and brake.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.