···
Log in / Register

What to Do When Encountering Rain During the Subject 3 Driving Test?

6Answers
LeSophie
07/29/2025, 07:40:24 AM

Precautions for the Subject 3 driving test in rainy weather include: 1. Check if the rearview mirrors have raindrops obstructing visibility before getting in the car; 2. Control speed appropriately, enhance observation, and increase following distance; 3. Shift to a lower gear in advance when encountering waterlogged sections; 4. Slow down early and yield to pedestrians and non-motorized vehicles when passing through areas with them. The road driving skills tested in Subject 3 include: preparation before starting, light simulation test, starting, driving straight, gear shifting operations, changing lanes, pulling over, going straight through intersections, turning left at intersections, turning right at intersections, crossing pedestrian crosswalks, passing school zones, passing bus stops, meeting oncoming vehicles, overtaking, making U-turns, and night driving.

Was this review help?
111
Share
VanDelaney
08/13/2025, 04:03:38 PM

During my driving test (Subject 3) on rainy days, I would arrive early to inspect the vehicle, especially ensuring the wipers effectively clear the windshield, as poor visibility can easily cause nervousness. Speed should be controlled more cautiously—normally 40 km/h is sufficient, but reduce to below 30 km/h in rain, maintaining double the usual following distance to prevent rear-end collisions. Use fog lights when necessary; don’t cut corners. Avoid slamming the brakes; apply gentle pressure to prevent skidding. Mindset is key—examiners are human too, and they won’t deduct points for safe operations under umbrellas. Accumulate experience during practice, treat the test as real driving, focus on smooth gear shifts and turns, and steady breathing to pass.

Was this review help?
2
Share
Expand All
DiAngela
10/08/2025, 01:48:39 AM

As a parent who drives year-round, I teach my child that safety comes first during the rainy-day Category 3 driving test. With poor visibility, it's essential to turn on high beams or fog lights and regularly check the cleanliness of rearview mirrors. Speed must be reduced, and braking distance should be estimated in advance as it increases; sharp turns can easily lead to skidding. Maintaining a safe distance is crucial. Stay calm—mistakes are twice as likely in the rain. Take deep breaths and focus on the examiner's instructions, ensuring timely wiper adjustments for clear visibility. Examiners prioritize standardized operations like not running red lights, and only safe completion leads to passing. Simulating rainy conditions a few times before the test prevents panic during the actual exam.

Was this review help?
6
Share
Expand All
StXavier
11/21/2025, 02:06:07 AM

On the day of my driving test (Subject 3), it happened to be a heavy rainstorm. Honestly, I was quite nervous. But I adjusted my mindset beforehand, reminding myself that everyone was in the same situation during rainy conditions, and the examiner was also understanding. During the test, I drove slower, stayed focused on turning and lane changing, and avoided sudden acceleration. I set the wipers to the highest speed, used normal lighting, and maintained a safety distance more than twice the usual. Looking back, the key was practicing rainy-day driving simulations during regular training, which made the test feel just like another routine practice.

Was this review help?
1
Share
Expand All
AnthonyLee
01/11/2026, 03:42:54 AM

From a technical perspective, the rainy-day driving test (Subject 3) requires strict vehicle control. Activate the wipers to ensure visibility, reduce speed to under 30 km/h, and steer gently to prevent skidding. Avoid slamming the brakes; use intermittent braking to engage the ABS system. Promptly use the air conditioning to defog and prevent mirror blurring. Maintain a distance of over 20 meters from the vehicle ahead, as braking distance doubles in rain. Stay focused on safe operations and don't worry about minor mistakes.

Was this review help?
3
Share
Expand All
DeAriana
04/08/2026, 12:57:32 AM

When facing the rainy day test for Subject 3, I'll make thorough preparations. Check the wipers and tires to ensure waterproof performance, and control the speed appropriately without exceeding limits. Safety first—turn on the high beams for better visibility and maintain at least a 15-meter distance from the car ahead. Stay calm, as the examiner evaluates overall safety rather than perfection in rainy conditions. Focus on traffic light compliance and turning maneuvers. Apply brakes early to prevent skidding during operations, and develop a feel for rainy driving through practice—let the test proceed naturally.

Was this review help?
14
Share
Expand All
More Q&A

Where is the Lexus fuel filler switch located?

Different models have different fuel filler cap switches. 1. Switch location: Generally, the switch is located on the driver's side door panel or near the seat, next to the trunk release button, with a fuel pump icon on it. 2. Push-type fuel filler: Some vehicles do not have a fuel filler cap switch and instead feature a push-type fuel filler cap. Pressing the left side of the fuel cap will cause it to pop open when refueling. Some unique models require a key to open the fuel filler cap for security reasons. 3. Methods to open the fuel cap if it malfunctions: First, if the fuel cap motor is damaged and cannot open, you can open the trunk and remove the right-side interior panel. Pulling the motor backward can temporarily unlock it, allowing the fuel cap to open. If it still doesn't open, it is recommended to visit the nearest 4S store for repair as soon as possible. If the fuel cap motor lock pin freezes in place after washing the car in winter, pouring hot water into the gaps around the fuel cap can usually restore its functionality. Another method is to repeatedly lock and unlock the car using the remote while tapping the fuel cap area with a fist, which may help open the fuel cap in some cases.
106
Share

Is a car that has just turned 6 years old exempt from inspection?

The sixth-year vehicle requires an on-site annual inspection. The six-year exemption refers to non-commercial passenger cars and other small and mini passenger vehicles (excluding vans and vehicles with 7 or more seats), which are exempt from on-site testing within six years. Relevant information about vehicle annual inspection is as follows: 1. Introduction: Vehicle annual inspection refers to a mandatory test for every vehicle that has obtained official license plates and a vehicle registration certificate, equivalent to an annual physical examination for the vehicle according to the "Safety Technical Conditions for Motor Vehicle Operation." 2. Purpose: Vehicle annual inspection can promptly eliminate potential safety hazards, encourage enhanced vehicle maintenance, and reduce the occurrence of traffic accidents.
101
Share

What is the difference between fog lights and position lights?

Both are used for nighttime illumination, but the high beam has a higher angle and longer range. Here are the details about fog lights and position lights: 1. Fog lights: As the name suggests, fog lights are turned on when there is fog. They have strong penetrating power and provide a good scattered light source, ensuring sufficient visibility in fog, rain, or snow, and alerting oncoming drivers to safety. 2. Position lights: Position lights, also known as small lights, are used to indicate the width of the vehicle. Hazard warning lights, commonly referred to as emergency flashers or double flashing, involve all front and rear turn signals flashing in a regular pattern to make the vehicle's width visible to following cars and serve as a warning at night.
109
Share

Differences between v97 and v93?

The differences between v97 and v93 are as follows: 1. Different engines: The Pajero v97 uses a 3.8L displacement engine with the code name 6g75; the v93 uses a 3.0L displacement engine with the code name 6g72. 2. Different power outputs: The Pajero v97 has a maximum horsepower of 243ps and a maximum torque of 327nm; the v93 has a maximum horsepower of 177ps and a maximum torque of 259nm. The similarities between v97 and v93 are as follows: 1. Both the Pajero v97 and v93 belong to the mid-to-large-sized vehicle category. 2. Both have the same body dimensions: length 4830mm, width 1895mm, height 1885mm, wheelbase 2780mm, and fuel tank capacity of 90L.
112
Share

What are the differences between Toyota C-HR and IZOA?

Toyota C-HR and IZOA have the following differences: 1. IZOA is produced and sold by FAW Toyota, while C-HR is produced and sold by GAC Toyota. 2. The lower grille of IZOA adopts a relatively simple horizontal bar style paired with silver lower guard decoration; whereas C-HR retains the design of the overseas model, using a more sporty honeycomb grille in the lower grille area. 3. The rear emblem of C-HR is "C-HR", while IZOA uses the English name "IZOA". 4. There is almost no difference in the powertrain between the two models. Both use a 2.0L naturally aspirated engine designed for the TNGA architecture series, featuring a four-cylinder structure with maximum power output of 171 horsepower and maximum torque of 203 Nm. The maximum torque speed range is 4400-4800 rpm, and the maximum power speed is 6600 rpm.
120
Share

What are the differences between the Envision and Envision S?

Here are the differences between the Envision and Envision S: 1. Different engines: The Envision is equipped with a 1.5T-L4 engine; the Envision S has a 2.0T-L4 engine. 2. Different maximum horsepower: The Envision has a maximum horsepower of 169ps; the Envision S has a maximum horsepower of 237ps. 3. Different maximum torque: The Envision has a maximum torque of 250nm; the Envision S has a maximum torque of 350nm. Below are the similarities between the two models: Both the Envision S and Envision are equipped with ABS anti-lock braking system, brake force distribution system, brake assist system, traction control system, and electronic stability control system.
120
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.