···
Log in / Register

What to Do If You Fail the Subject 4 Exam?

1Answers
AustinFitz
07/28/2025, 03:29:09 PM

Subject 4 shares many similarities with Subject 1 in terms of test items, but Subject 4 focuses more on practical driving experience. Therefore, during preparation, it's essential to review questions thoroughly, practice extensively, and consider how you would react as a driver in similar real-life situations. This approach not only reinforces your understanding of the questions but also greatly benefits your future driving on the road. Subject 4 is just "one step away" from obtaining your driver's license—passing it will make your dream come true. However, if you fail the Subject 4 exam, don't lose heart or be discouraged. Remember, as long as you are within the 3-year validity period of the driving test, the number of retakes for Subject 4 is unlimited, unlike Subjects 2 and 3, which allow only 5 attempts. The 3-year validity period starts from the date you passed Subject 1, not from the date of your driving test registration. During the exam, face the test content head-on without avoidance. Reflect on your mistakes and deductions from each attempt, adjust your mindset, and strike while the iron is hot. Don't give up hope—trust in your abilities and maintain a positive attitude. Take the exam seriously in terms of tactics but lightly in strategy. Don't fear the test. Persistence leads to victory! Everyone is a winner!

Was this review help?
104
Share
More Q&A

How many kilometers should a new car be driven during the break-in period?

A new car should be driven approximately 3,000 kilometers during the break-in period. During this time, avoid sudden acceleration and braking, as well as excessive loads. Simply drive according to road conditions, keeping the engine speed below 3,000 RPM, maintaining speeds under 80 km/h in normal conditions, and not exceeding 100 km/h on highways. Additionally, take a 10-minute break every two hours. If the new car is frequently in low-speed, low-RPM traffic congestion, it is advisable to occasionally drive at higher speeds. This is because low speeds result in slower oil circulation, and under high temperatures, oxidation can lead to increased carbon deposits. Initially, it is not recommended to drive at high speeds during the break-in period—maximum speed should not exceed 100 km/h, and engine speed should not surpass 3,000 RPM. It is suggested to drive 2,500 kilometers first, then perform a high-speed run before the first maintenance and engine oil change.
111
Share

Can You Drive with Only Three Lug Nuts on a Tire?

Tire with only three lug nuts cannot be driven. Lift the car: Prepare gloves, a new tire, and a jack. Place the jack under the frame on the side where the tire needs to be replaced. Operate the jack to lift the car. Remove the old tire: Use a wrench to sequentially remove the bolts of the tire that needs to be replaced, then take off the wheel. Install the new tire: Align the new tire with the axle and bolt holes, initially tighten the lug nuts. While tightening the nuts, you can step on the sidewall part at the bottom of the tire with your foot. Lower the car to complete installation: Lower the jack and tighten each bolt in a diagonal sequence. When replacing a tire, ensure you are in a safe and stable location to prevent the car from rolling.
103
Share

Is It Normal for a Battery to Heat Up While Charging?

It is not normal for a battery to heat up while charging. Precautions for battery charging: Avoid storing the battery in a depleted state: A depleted state refers to when the battery is not charged in time after use. In this state, sulfation is likely to occur, where lead sulfate crystals form on the plates, blocking ion channels and leading to insufficient charging and reduced battery capacity. The longer the battery remains idle in a depleted state, the more severe the damage. If the battery is not in use, it should be charged once a month to extend its lifespan. Regular inspection is necessary: During use, if the electric bicycle's range suddenly drops by several kilometers in a short period, it is highly likely that at least one battery in the pack has issues such as broken cells, softened plates, or shedding of active material from the plates, leading to a short circuit. Battery charging duration: The battery typically requires 8 to 12 hours to charge.
108
Share

How to Study for B2 Driver's License Points Deduction?

Drivers must report to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the violation occurred within fifteen days to participate in a seven-day study session. Below is relevant information: 1. Handling Procedure: Motor vehicle drivers must report to the traffic management department of the public security authority at the place where the motor vehicle driver's license was issued or where the violation occurred within fifteen days to participate in a seven-day study session on road traffic safety laws, regulations, and related knowledge. After completing the study session, the vehicle management office must conduct a test on road traffic safety laws, regulations, and related knowledge within twenty days. 2. Annual Review Content: Review the handling of violation points deduction; review the driver's physical condition; review the test results of the safe driving course; only after all violation fines are paid, the physical examination is approved, and the test is passed, can the points for the scoring cycle be cleared.
113
Share

What is the most ideal reference for cylinder boring?

Cylinder boring is most ideally referenced to the lower plane. Purpose of cylinder boring: The purpose of cylinder boring is to eliminate surface shape errors on the cylinder to accommodate new pistons. Effects of cylinder surface wear: The degree of cylinder wear has the greatest impact on the power performance of a vehicle. Cylinder wear increases the clearance between the cylinder and the piston or piston rings, reducing the compression pressure in the cylinder and leading to a decline in engine performance. Along the cylinder axis, the wear forms a taper that is larger at the top and smaller at the bottom. The maximum wear occurs at the cylinder wall corresponding to the first piston ring when the piston is at top dead center. The upper part of the cylinder, which does not come into contact with the piston rings, shows almost no wear, forming a step. The wear around the circumference of the cylinder is also uneven, forming an irregular oval shape. The maximum radial wear area is usually near the opposite side of the intake valve.
113
Share

How Long Can a Car Battery Generally Be Left Unused?

Car batteries can generally be left unused for about one month. If the vehicle starts normally within a month, it indicates the battery is in good condition. Starting within 15 days is also considered normal. Beyond 30 days, the vehicle typically won't start, although the dashboard may still display information. After 60 days, there will usually be no display at all. A car battery, also known as a storage battery, is a type of battery that works by converting chemical energy into electrical energy. The commonly referred to car battery is a lead-acid battery, which is primarily made of lead and its oxides, with a sulfuric acid solution as the electrolyte. The normal service life of a car battery varies from 1 to 8 years, largely depending on the vehicle's condition. Under normal circumstances, with proper alternator charging and no electrical leakage or grounding issues, the battery can generally last more than 3 years.
106
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.