What to Do If the Parking Ticket Is Not Displayed on Traffic Management 12123?

How to use the air conditioning in the Tiguan L?

Press the AC button on the front control panel to turn on the air conditioning, then adjust the fan speed button, and the air vents at the front of the car will blow cold air. Usage method: AC is the air conditioning switch, MAX means maximum, and the internal circulation can be manually turned on or off. By default, when the air conditioning is turned on to the maximum state (or when the temperature difference between the inside and outside of the car is relatively large), the internal circulation will automatically turn on; in other cases, it generally does not turn on automatically. Taking the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition as an example: 1. After starting the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition, wait for 5-10 minutes until the water temperature rises to normal temperature, then you can turn on the warm air. 2. Adjust the air conditioning circulation mode of the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition to internal circulation. 3. Set the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition to warm air mode, which is the red zone. 4. Do not turn on the AC button of the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition. 5. Adjust the air conditioning gear of the Volkswagen Tiguan L 2018 Modified 330TSI Automatic Two-Wheel Drive Luxury Edition to a suitable level and adjust the direction of the air vents.

15

1

Share

Can you turn right when the straight-through light is red without a right-turn light?

You can turn right when the straight-through light is red without a right-turn light, but you need to be careful not to affect the passage of straight-through vehicles and pedestrians on the crosswalk, otherwise you will be deducted 3 points and fined 200 yuan. Whether it is a straight-through arrow red light or a full-screen red light right turn, the vehicle must be in the rightmost motor vehicle lane, otherwise, driving not according to the lane will result in points deduction and fines, and it is also easy to cause rear-end accidents. When driving at an intersection with traffic lights, pay attention to: When driving at an intersection with traffic lights, you should pay attention to slowing down in advance and not getting too close to the car in front. If the car in front is relatively tall, such as a bus or a large passenger car, you should keep a greater distance. When driving, you should not only look ahead but also observe the situation on the left and right sides of the car more often. You can use the left and right rearview mirrors to check. If it is an arrow signal light, because it will indicate the direction of travel, you should drive correctly according to the display of the arrow indicator light, and you must not drive when the light is red. There are three types of driving a motor vehicle not according to the prescribed lane: Driving a motor vehicle on the highway not according to the prescribed lane, violation code: 43120, fine standard: deduct 3 points, fine 100 yuan; Driving a motor vehicle on the urban expressway not according to the prescribed lane, violation code: 13550, penalty standard: deduct 3 points, fine 100 yuan; Driving a motor vehicle on roads other than highways and urban expressways not according to the prescribed lane, violation code: 60230, penalty standard: no points deduction, fine 100 yuan. Preventive measures: In view of the severe situation of traffic safety, in order to achieve the annual work goals of reducing the number of accidents, the number of deaths, the mortality rate per 10,000 vehicles, and the number of major traffic accidents compared with the same period last year, the national traffic management departments of public security organs will continue to thoroughly implement the spirit of the April 17 meeting, deepen the "five rectifications and three strengthenings" work measures, comprehensively promote the "safe and smooth county" activity, and continue to carry out special rectification.

3

4

Share

What does Subject Two include?

The C1 license Subject Two test for small cars includes five mandatory items: reverse parking, parallel parking, hill start and stop, right-angle turn, and curve driving (commonly known as S-curve). In some regions, there is a sixth item: highway toll card collection. The C2 license Subject Two test includes four mandatory items: reverse parking, parallel parking, right-angle turn, and curve driving (commonly known as S-curve). Reverse Parking: Reverse parking is one of the most practiced and considered challenging items in the Subject Two test. The most critical point during the test is that the car must not stop midway; otherwise, the test will be considered a failure. Before preparing to park, the candidate can observe the garage boundary lines through the rearview mirror to determine the steering wheel angle for reversing. The car body should maintain a distance of 1.5 to 1.8 meters from the boundary line, and the car should start reversing slowly once the front of the car crosses the infrared line. When the right rear window's vertical trim aligns with the upper right corner of the yellow boundary line, the steering wheel should be turned fully to complete the reverse parking. Parallel Parking: Parallel parking is a commonly used skill in daily driving. The candidate must drive the car parallel to the parking space and then reverse into it without any pauses. As long as the car is parked within the designated area without crossing the boundary lines, the test is passed. Note that stopping midway will result in failure. Hill Start and Stop: During the hill start and stop test, candidates are most concerned about stalling. When the car is stopped on the slope, the handbrake must be engaged to prevent rolling back. The process of starting, accelerating, and passing the slope constitutes the hill start test. Rolling back will also result in point deductions. Right-Angle Turn: During the right-angle turn, the candidate must control the car's speed and complete a 90-degree sharp turn at low speed without stopping. Failing to complete the turn or stalling midway will result in point deductions. It is important to position the car close to one side of the road to make the turn easier. Curve Driving: Curve driving requires the candidate to have a good sense of the car. The car must navigate an S-shaped path of a specified width without touching the boundary lines, and the steering must be smooth. The purpose is to develop the driver's ability to control the car's direction and track the wheel trajectory. Mastering this skill will make the test easier.

14

0

Share

What is the sensor on the valve cover of the Toyota Corolla?

The sensor on the valve cover of the Toyota Corolla is the camshaft position sensor. The camshaft position sensor is one of the important sensors in the engine electronic control system. Its function is to provide and confirm the piston position signal to the vehicle's computer ECU, thereby determining the ignition timing and sequential fuel injection of the engine. Taking the 2021 Toyota Corolla as an example, it belongs to the compact car category, with body dimensions of: length 4635mm, width 1780mm, height 1455mm, wheelbase of 2700mm, fuel tank capacity of 50 liters, and trunk capacity of 470 liters.

5

0

Share

What is the charging current for a car battery?

Car batteries typically have a charging current of 12V. Here's a relevant introduction to car batteries: Function: Also known as storage batteries, they provide the electrical energy needed for starting a car and help balance the output and load of the generator. Most car batteries are 12V60A, consisting of 6 individual cells with each cell having a voltage of approximately 2V. Maintenance: Modern maintenance-free batteries mostly use alloy plate grids, which enhance corrosion resistance and tensile strength. The electrolyte lost during charging can quickly flow back without needing any additional liquid. Maintenance-free batteries generally have strong overcharge resistance, long power storage duration, and can provide stable high-current output.

15

3

Share

Does mixing windshield washer fluid with water have any impact?

Mixing windshield washer fluid with water can easily cause impurities in the water to adhere to the rubber tubes, affecting normal spraying. Long-term use may increase friction between the glass surface and the wiper blades, resulting in scratches on the glass. Below is relevant information about automotive windshield washer fluid: 1. Main components: deionized water, alcohol, ethylene/propylene glycol, methyl ether, protective agents, surfactants, pigments, etc. 2. Functions: Ability to clean stains without leaving water marks after cleaning; dustproof and antistatic properties make it less likely to attract dirt after washing; antifreeze capability; corrosion resistance without causing any damage to the glass or vehicle; winter-specific windshield washer fluid also has antifreeze and antifog capabilities.

2

3

Share

What to Do If the Parking Ticket Is Not Displayed on Traffic Management 12123?

How to use the air conditioning in the Tiguan L?

Can you turn right when the straight-through light is red without a right-turn light?

What does Subject Two include?

What is the sensor on the valve cover of the Toyota Corolla?

What is the charging current for a car battery?

Does mixing windshield washer fluid with water have any impact?

How soon can you take Subject 4 after passing Subject 3 if you took Subject 3 first?

How to adjust the gear lever position of an old Jetta?

Is the Nezha N01 a pure electric vehicle?

Can the Subject 1 Exam Questions Be Completed in One Day?