···
Log in / Register

What to Do If the Driver's License Photo Is Blurry?

6Answers
AlanRose
09/03/2025, 01:02:06 AM

You can replace the driver's license photo by applying for a replacement of the driver's license. The service fee is not high, and it usually takes only one or two days. To apply for a replacement, you should first fill out an application form and submit the following documents and proofs: the identity proof of the motor vehicle driver; a written statement declaring the loss of the motor vehicle driver's license. For those who meet the requirements, the vehicle management office should issue a replacement motor vehicle driver's license within one day. After obtaining the replacement driver's license, the original driver's license becomes invalid.

Was this review help?
119
Share
MacTravis
09/15/2025, 02:33:21 AM

I've also encountered the issue of a severely blurred driver's license photo. The most reliable solution is to visit the vehicle management office for a replacement. Remember to bring your original ID card and a copy, along with a one-inch white-background ID photo (preferably wearing dark-colored clothes). The staff will verify your information on-site, and if the photo doesn't meet requirements, you'll need to retake it immediately. The process takes about half an hour with a fee of just 10 yuan. To save time, you can make an appointment in advance via the Traffic Management 12123 APP to avoid long queues. A blurry photo can easily cause misunderstandings, especially during traffic police checks, so don't delay. Usually, keep your driver's license in a cardholder to prevent wear from friction with keys. If the photo smudges due to sweat, wipe it clean promptly or go for a replacement.

Was this review help?
9
Share
Expand All
Judith
10/29/2025, 03:12:43 AM

As an experienced driver, I recommend dealing with a blurry driver's license photo immediately. An unclear photo may cause unnecessary trouble during traffic police checks. Replacing the driver's license is quite convenient—just go to the vehicle management office, fill out an application form, and submit the required materials. It can usually be done on the same day. Remember to bring three recent ID photos and your ID card; having a medical examination report would be even better. If you're in a different location and can't return to your hometown to handle it, you can apply for a replacement license in another city. Nowadays, many places offer self-service photo booths, which provide more consistent results than manual photo-taking. Always pay attention to how you store your license to prevent it from getting damp, moldy, or exposed to strong light. If the plastic cover starts peeling and causes the photo to bubble or warp, go for a replacement right away.

Was this review help?
19
Share
Expand All
JulianaAnn
12/12/2025, 02:24:35 AM

If your driver's license photo is blurry, it needs to be replaced as soon as possible. The required materials are simple: ID card, photo, and the old driver's license. After filling out the application form at the DMV, go directly to the photo point for an update. During the photo session, maintain eye level and a natural expression, avoiding shadows. The processing fee is ten yuan, and some areas support WeChat payment. After replacement, remember to check if the new license information is accurate. If offline processing is inconvenient due to the pandemic, you can log in to the 12123 APP to upload your ID photo and apply for a mailed replacement. Typically, the new license will arrive within three days. A blurry photo may affect procedures such as vehicle annual inspections, so it is recommended to handle it within a week of discovery.

Was this review help?
18
Share
Expand All
McTucker
02/01/2026, 03:33:37 AM

I just went to replace my blurry driver's license photo last week. The DMV staff said common issues are sweat stains seeping through or the laminate cracking. The replacement process involves three steps: first, take a number and queue in the hall, then take a digital ID photo on-site or submit your own photo, and finally return the old license to receive a new one. Note that the photo must be a color photo with a white background taken within the last six months, and no tinted glasses are allowed. If the machine malfunctions and you can't replace the license, remember to request a processing receipt. To prevent recurrence, it's recommended to proactively check your driver's license status every two years, especially in humid southern regions. When driving, avoid placing your license on the dashboard where it's exposed to direct sunlight.

Was this review help?
16
Share
Expand All
JuneFitz
04/27/2026, 01:42:14 PM

There are typically three ways to resolve the issue of a blurry driver's license photo. The preferred method is to visit the vehicle management office in person, where they have a standardized photo booth process. Alternatively, you can use a self-service license renewal terminal, which takes about five minutes to complete. Another option is to apply through an online platform, but you will need to provide a compliant digital photo yourself. The key point is the clarity of the photo; it is recommended to wear formal attire and ensure both ears are visible when taking the photo. For temporary emergencies, you can use transparent tape to reinforce the blurry areas. In the long term, avoid mixing the driver's license with coins or keys to prevent friction damage. If the blur is caused by finger stains, gently clean it with an alcohol wipe first. After replacement, it is advisable to scan and backup a digital copy to avoid the hassle of reapplication in case of loss.

Was this review help?
2
Share
Expand All
More Q&A

Where is the Zotye T600 engine produced?

The Zotye T600 engine with the model code 4G63S4T is produced by Shenyang Mitsubishi, while other models of engines are developed by SAIC and General Motors, which are older engines equipped after Zotye's independent research and development. Below are specific details about the Mitsubishi 4G engine: 1. The Mitsubishi 4G engine is a 1834cm3 displacement engine developed by Mitsubishi. 2. It utilizes GDI (gasoline direct injection) technology, which means injecting gasoline directly into the cylinder, achieving high response and precision fuel control. 3. The 4G series engine is a high-performance, highly reliable advanced product used in China's mid-to-high-end cars, MPVs, and SUVs.
115
Share

What is the horsepower of the new S60 new energy engine?

The new S60 new energy is equipped with a 2.0-liter twin-charged engine, which has 303 horsepower. Here is an introduction about this engine: A twin-charged engine combines both turbocharging and supercharging, allowing it to choose different charging methods under different working conditions, thereby improving engine efficiency and power. Extended content: 1. The 2.0-liter twin-charged engine of the new S60 new energy has a maximum power of 223 kW, a maximum torque of 400 Nm, a maximum power speed of 6000 rpm, and a maximum torque speed ranging from 2200 to 4800 rpm. 2. This engine is equipped with direct fuel injection technology and uses an aluminum alloy cylinder head and block. The total power of the electric motor matched with this engine is 65 kW, and the total torque is 240 Nm.
107
Share

What is the minimum ground clearance of the Toyota IZOA?

IZOA's official chassis height is 145mm, but actual measurements by car owners show 170mm. The minimum ground clearance when fully loaded is measured by IZOA owners at 135mm. Below are specific details about ground clearance: 1. Ground clearance refers to the distance between the ground and the rigid parts at the bottom of the vehicle. The ground clearance of a vehicle varies depending on whether it is unloaded or loaded. 2. Ground clearance is related to the vehicle's load; the heavier the load, the smaller the ground clearance. Vehicles with smaller ground clearance have a lower center of gravity but poorer passability. Vehicles with larger ground clearance have better passability and are easier to park. Higher ground clearance not only improves passability on gravel or mountain roads but also prevents water from entering the exhaust pipe when driving through flooded roads, and makes it easier to park on curbs or parking spaces with height differences. 3. The larger the minimum ground clearance, the better the vehicle's ability to pass over obstacles or uneven terrain, but the higher center of gravity reduces stability. The smaller the minimum ground clearance, the weaker the vehicle's ability to pass over obstacles or uneven terrain, but the lower center of gravity increases stability.
108
Share

What grade of gasoline should the Jetta VS5 use?

Jetta VS5 uses 95-octane gasoline. More information about 95-octane gasoline and car refueling is as follows: 1. 95-octane gasoline consists of 95% isooctane and 5% n-heptane. When the engine compression ratio is high, high-octane gasoline should be used. If low-octane gasoline is used in a high-compression ratio engine, it may cause abnormal phenomena. Nowadays, high-compression ratio engines can also use lower-grade gasoline, but you should not blindly choose gasoline based on the compression ratio. Instead, follow the manufacturer's recommendations for refueling. 2. The fuel tank capacity of the Jetta VS5 is 51 liters. When refueling, it is recommended not to overfill the tank. Additionally, try to choose large, reputable gas stations for refueling and avoid using substandard fuel to save money.
108
Share

What causes the engine warning light to sometimes turn on and sometimes off?

When the engine warning light flashes, it indicates a fault in the engine, which is relatively serious and requires immediate inspection. The specific reasons may include the following seven: Sensor malfunction: The sensors referred to here include those for coolant temperature, crankshaft position, air flow, intake temperature, oxygen, etc. When these sensors are damaged, have poor contact, or experience signal interruption, the vehicle's ECU cannot accurately obtain engine data, triggering the engine warning light. Fuel or oil quality issues: If fuel or engine oil is not added according to the manufacturer's requirements, it may cause engine wear, leading to the warning light turning on. Poor combustion of the air-fuel mixture: Poor combustion can cause engine carbon buildup or knocking. When detected by the oxygen sensor and reported to the ECU, the warning light will illuminate as a warning. Issues such as spark plug failure, ignition coil failure, fuel pump failure, or fuel line blockage can all lead to poor combustion of the air-fuel mixture. Turbocharger issues: The intake boost pipe or turbocharger can also cause the engine warning light to turn on. The most common issue is turbocharger damage, accompanied by symptoms like oil leaks, high oil consumption, reduced power, metallic noises, or blue/black smoke from the exhaust. Intake problems: If there is an issue with the vehicle's intake, it may lead to engine pipe blockage, which in severe cases can trigger the engine warning light. A dirty air filter that hasn't been cleaned regularly can cause intake problems. Exhaust problems: Exhaust faults can also cause the engine warning light to turn on. Common causes include faults in the rear oxygen sensor, catalytic converter, exhaust camshaft, or bearings, with the catalytic converter being the most frequent issue. Using leaded gasoline, lead- or silicon-based lubricant additives, physical damage to the catalytic converter, or fuel system faults can easily lead to catalytic converter failure. Anti-theft system malfunction: If the vehicle's electronic anti-theft system fails or if the anti-theft controller does not match the engine electronic controller, the anti-theft system can prevent the engine from operating normally, while also triggering the engine warning light. Generally, the engine warning light can display four scenarios: steady yellow light, flashing yellow light, steady red light, or flashing red light. The severity of the fault increases from steady to flashing and from yellow to red. In order of severity: flashing red > flashing yellow/red > steady red > steady yellow/red. If the engine warning light turns on, follow these steps: First, check whether the engine is running normally, such as if there is shaking or black smoke. If so, avoid restarting the engine. Note: Do not restart the engine if the red light is on. If the engine can be started, turn it off for 5-10 minutes, then without pressing the brake, press the start button once or turn the key halfway to the 'ON' position without pressing the clutch. The vehicle will perform a self-check after powering on. Wait 5-10 seconds to see if the warning light turns off. If the warning light remains on, visit a service station as soon as possible. The service station can use a portable diagnostic tool to read the fault code, identify the issue, and perform targeted repairs.
111
Share

How to use the air conditioning in Roewe 750?

The usage method of the Roewe 750 air conditioning is as follows: 1. After starting the vehicle engine, click the OFF button on the central control panel to turn on the air conditioning. 2. After turning on the air conditioning, click the AC button on the air conditioning to enter the cooling mode, then adjust the appropriate temperature and air volume to start cooling. 3. If you want to turn on the heating mode, there is no need to press the AC button; simply increase the temperature and adjust the air volume to start heating. Additionally, when using the air conditioning in summer, be careful not to immediately activate the internal circulation after entering the car. Because the temperature inside the car is higher than the outside temperature, this would actually reduce the cooling effect. When you first enter the car, you should open the windows for ventilation and turn on the external circulation to expel the hot air. After the temperature inside the car has dropped, you can then switch to internal circulation.
101
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.