···
Log in / Register

What tires does the Tucson use?

3Answers
Sally
08/28/2025, 11:53:41 PM

The original tire specification for the Tucson is 225/55R18, which belongs to the premium series of Bridgestone tires. Below are some relevant materials about the tires: Tips to extend tire lifespan: 1. Pay attention to daily tire maintenance. Regularly check for punctures, scratches, or bulges caused by broken cords. 2. Monitor tire pressure periodically. Check tire pressure frequently and measure it every month, topping it up as needed. Always check tire pressure before highway driving to ensure it is within the normal range. 3. Develop good driving habits. 4. Try to avoid sudden starts, hard braking, and fast cornering, as these actions can accelerate tire wear and increase instantaneous pressure. Avoid running over hard objects on the road and control your speed.

Was this review help?
109
Share
OBella
05/09/2026, 06:29:21 AM

My friend just got the Tucson L Hybrid, which comes with Michelin Primacy 4 tires in 235/60 R18 size featuring a self-sealing coating. These tires are particularly suitable for urban commuting, as small nail punctures don't require immediate repair. However, the original tires aren't cheap, costing over 4,000 yuan for a set of four. For those on a budget, Giti's F50 is also a good option, with only a 10% difference in wet grip test performance. When modifying tires, ensure the outer diameter change doesn't exceed 3%, otherwise the ABS may malfunction. Check the TREADWEAR index on the tire sidewall - values above 400 indicate better wear resistance.

Was this review help?
12
Share
Expand All
AmaraAnn
05/10/2026, 11:51:26 PM

The tires used by the two generations of Tucson in my family are completely different. My dad's old model came with 215-width Maxxis MA656, while the new model now directly uses 235-width tires. The tire specifications are printed on the door frame or fuel filler cap, and you need to check the speed rating (H or V) when replacing tires. Last time I had a flat tire, I realized the spare tire was a non-full-size one, only suitable for emergency use at speeds up to 80 km/h. For daily maintenance, it's recommended to rotate the tires every 20,000 kilometers, which can extend their lifespan by 20%. It's also important to regularly clean out stones stuck in the treads, as they can significantly damage the rubber.

Was this review help?
4
Share
Expand All
More Q&A

What to Do If You Accidentally Enter an ETC Lane?

Most highway ETC entrances have reserved lanes for lane changing. Some vehicles without ETC devices may accidentally enter the ETC lane. If it does not affect the vehicles behind, you can still choose to change lanes and enter the manual toll collection lane.
106
Share

How to Install Reversing Trajectory?

To install dynamic reversing trajectory lines, it is necessary to obtain the steering angle data of the front wheels. Therefore, a steering angle sensor needs to be installed, so that the trajectory lines on the reversing image of the central control screen can become dynamic.
111
Share

What is the standard for following distance?

When a motor vehicle is traveling on the road at a speed exceeding 100 km/h, it should maintain a safe distance of at least 100 meters from the vehicle in front. If the speed is below 100 km/h, a minimum safe distance of 50 meters should be maintained to ensure normal driving. When driving at low speeds below 40 km/h, the safe following distance should not be less than 30 meters. For very slow speeds below 20 km/h, the safe distance should be at least 10 meters. When driving a motor vehicle, it is essential to maintain sufficient safety distance. This is particularly important during rainy or snowy seasons when roads become slippery, increasing braking distances. Drivers should reduce speed in advance to avoid potential safety hazards. Motor vehicles on the road must comply with the Road Traffic Safety Law and adhere to local traffic restrictions and license plate policies to prevent violations. Each traffic violation poses certain risks, and vehicle owners should take care to avoid them.
105
Share

What is the general lifespan of a Lavida shock absorber?

Generally, a car's shock absorbers need to be replaced after driving more than 80,000 kilometers. If there are no malfunctions during this period, replacement may not be necessary. Although there is no strict requirement on how often car shock absorbers should be replaced, they are crucial for the comfort of the vehicle. Therefore, it is still important to pay attention to the replacement of car shock absorbers. After use, shock absorbers will experience internal wear and aging issues. Although it may not be visually apparent whether the shock absorber is damaged, the driver can clearly feel that the car's comfort is not as good as before. For example, the handling during braking and turning becomes significantly worse, which is largely due to problems with the shock absorbers. Hence, shock absorbers should be replaced when necessary. The function of a car's shock absorber is to prevent the vehicle from bouncing excessively while driving. The principle of a car shock absorber is actually quite simple: when the spring of the shock absorber vibrates, the oil inside the shock absorber is forced through small holes, thereby limiting the car's bouncing. This design is very ingenious, and different cars have different shock absorption performances, mainly due to variations in the size of these holes. Therefore, the most important role of a car shock absorber is to prevent the vehicle from experiencing severe vibrations.
106
Share

What are the hatchback models of Citroën?

Citroën hatchback models include Dongfeng Citroën-Tianyi, Citroën C3-XR, and Citroën C6. Below are the relevant introductions about these Citroën hatchback models: Dongfeng Citroën-Tianyi: The body dimensions are 4510 1860 1705mm (length width height), with a wheelbase of 2730mm. It is equipped with the PHC adaptive hydraulic stability technology with over 20 patents, ensuring driving comfort. This model features lane departure warning, lane change assist, active braking, ACC adaptive cruise control, and other practical configurations. Citroën C3-XR: The overall design of the C3-XR is relatively simple, adopting a carbon fiber-like style. The leather multi-function steering wheel with an inverted D-shape design integrates rich functions. The dashboard design is practical and simple, with clearly laid out and functional operation buttons. High-end models are equipped with a large touchscreen LCD display. The 16-inch flowing rotary wheel rims feature a staggered design. Additionally, high-end models come with a 1.3㎡ panoramic sunroof. Citroën C6: The Citroën C6 is a mid-size car with a strong business-oriented appearance. The C6 maintains an excellent chassis and high-quality interior materials. The power tuning matches well with its appearance, offering smooth output and ample power reserves.
107
Share

What is the difference between Sahara and Rubicon?

Sahara and Rubicon have differences in design, appearance, chassis system, etc. The following are the relevant introductions about Sahara and Rubicon: Rubicon vs. Sahara Design: In terms of configuration design, the Sahara is equipped with a limited-slip differential on the rear axle, while the Rubicon is equipped with differential locks on both the front and rear axles. The limited-slip differential can only restrict the rotation of the slipping wheels to a certain extent and cannot completely lock them, but the differential lock can completely lock the slipping wheels. When the Rubicon's differential lock is activated, all torque is transmitted to the unlocked half-shaft, so from this perspective, the Rubicon's half-shaft has greater torsional strength, resulting in stronger off-road performance. Rubicon vs. Sahara Appearance: In terms of appearance, the overall difference between the Rubicon and Sahara is not very obvious, with only subtle distinctions in details. The Rubicon adopts a two-tone body design, with black plastic wheel arches featuring a textured pattern, not matching the body color. The Sahara model's wheel arches are designed to match the body color, and the Sahara logo is printed on the lower hinge of the front door. Rubicon vs. Sahara Chassis System: In terms of the chassis, the Rubicon and Sahara are significantly different, designed for two distinct off-road styles. From a positioning perspective, the Rubicon model focuses more on extreme off-road performance, adapting to harsher off-road environments. Therefore, the Rubicon's chassis is reinforced to some extent. From the rear axle perspective, the Rubicon has a larger reduction ratio than the Sahara, meaning that with the same engine power output, the Rubicon will have greater torque output at the wheels. The Sahara model emphasizes the practicality and economy of daily off-road use.
113
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.