···
Log in / Register

What stickers are required on the front of a car?

1Answers
CorbinDella
07/29/2025, 07:32:47 PM

Stickers required on the front of a car include: 1. Motor vehicle inspection compliance sticker; 2. Compulsory traffic insurance sticker; 3. Environmental protection emission sticker. The car insurance sticker is an oval-shaped, built-in sticker issued by the insurance company to policyholders as proof of compulsory motor vehicle traffic accident liability insurance coverage. It contains: 1. Policy number; 2. License plate number; 3. Insurance period; 4. Name of the underwriting company; 5. Service hotline. Steps to affix the insurance sticker: 1. Clean the front windshield thoroughly; 2. Prepare a static cling sticker and place it on the upper right corner of the front windshield; 3. Apply the insurance sticker onto the static cling sticker in the upper right corner of the windshield, then smooth out any air bubbles in the middle.

Was this review help?
108
Share
More Q&A

Is the Sunra Lithium Battery Safe?

Sunra lithium batteries are very safe. Here are the relevant details: Advantages: Automotive-grade lithium batteries, guaranteed for 5 years and usable for 10 years, their performance and quality have been tested by the market in multiple aspects. Whether it's safety, lifespan, or range, they possess unparalleled advantages compared to other brand electric vehicles. Core Factors: The most critical factor concerning lithium battery safety is the safety of the battery cell. Ordinary lithium batteries have electrode materials and electrolytes that are active materials, which can pose combustion and explosion risks if mishandled. In contrast, Sunra's automotive-grade lithium battery cells use inert metals and lithium iron phosphate, offering strong stability and high safety. Beyond materials, Sunra's automotive-grade lithium battery cells also feature two layers of passive safety protection functions. Even if a short circuit occurs during use, it can automatically activate protection, preventing hazards before they arise. BMS: The BMS intelligent battery management system acts like a smart monitor, constantly observing and always on standby. In cases of overcharging, overheating, or over-power situations, it activates 3 safety protections and 12 intelligent protection functions, comprehensively balancing the battery's state to ensure its stability and safety.
117
Share

Why does the motorcycle experience strong deceleration when releasing the throttle?

Motorcycles experiencing strong deceleration when releasing the throttle are mainly caused by the engine and clutch, which are naturally related to systems such as ignition, intake, and fuel injectors. Here is some extended information: Inspection items: If the motorcycle experiences weak acceleration and a jerking sensation, the owner can first perform a simple inspection of the vehicle, such as checking the engine oil level and whether it has been a long time since maintenance was performed on components like the engine throttle, fuel injectors, spark plugs, and catalytic converter. Over time, these components can accumulate carbon deposits, which can affect the vehicle's power. Precautions: During the break-in period, the engine speed should be varied frequently, and all gears should be broken in. The throttle should not be fixed at a certain speed for continuous operation. The purpose is to ensure balanced load-bearing of all components, but the specified maximum speed should not be exceeded.
120
Share

What is the mnemonic for the lighting test in Subject One?

The mnemonic for the lighting test in Subject One is as follows: Left turn signal: When turning left, changing lanes to the left, starting off, leaving a parking spot, or making a U-turn. Right turn signal: When turning right, changing lanes to the right, or pulling over to the side. Night driving: Use low beams when driving at night with good street lighting, and use high beams when driving at night without street lighting. Driving in fog: Turn on fog lights and hazard warning lights when driving in fog. Changing lanes: Turn signals must be used when changing lanes, except when entering a roundabout. Entering a roundabout: Do not use turn signals when entering, but use the right turn signal when exiting. Overtaking at night: Alternate between high and low beams.
109
Share

Is Replacing a Car Water Pump Considered a Major Overhaul?

Replacing a car water pump is not considered a major overhaul. Below is additional information: Definition: A major car overhaul refers to completely disassembling the engine and replacing components such as the cylinder liners, piston rings, and timing system. From this, it's clear that merely replacing the water pump does not qualify as a major overhaul. Description: The water pump is just a single component located near the engine's timing system, and replacing it does not require complete engine disassembly. Therefore, it is not considered an engine overhaul. Moreover, the water pump tends to fail before the engine does, so timely replacement is necessary. Since replacing the water pump involves the timing system, it's essential to inspect the timing system and replace it if necessary. Symptoms of a faulty water pump: A damaged water pump can weaken or even stop the cooling circulation, leading to coolant boiling. Leakage near the engine's water pump area may occur. Coolant leakage can leave traces of coolant color on the water pump's ventilation holes, resulting in symptoms like high engine temperature due to insufficient coolant.
117
Share

Does Car Light Modification Require Registration?

Car light modification requires registration. Car light modification is legal only after approval by the traffic management department; without approval and registration, it is considered illegal. Below is additional information: Regulations: Whether modified car headlights can pass annual inspection depends on whether they meet the inspection requirements. Relevant regulations stipulate that the high beam must not be less than 1450 lumens, and the low beam must not be less than 1050 lumens. If they do not meet these standards, they will not pass the annual inspection. Content: No unit or individual is allowed to assemble motor vehicles or alter the registered structure, construction, or features of a motor vehicle without authorization. The vehicle's structure includes body color, length, width, four rigid standards, and relevant technical parameters of the engine. Registration Application: Before modifying a licensed car, the owner must submit a registration application to the vehicle management office. After the modification technical report is reviewed and approved by the vehicle management office, the modification can proceed. Upon completion, the owner must go to the vehicle management office to complete the modification change procedures.
115
Share

What are the effects of high temperature weather on cars?

High temperature weather can affect cars in several ways, including overheating of the vehicle body, damage to the paint, brake failure, and engine overheating (commonly known as "boiling over"). Here are some additional details: Overheating of the vehicle body: During summer, the high ambient temperature can cause the engine to overheat during prolonged driving. Therefore, car owners should pay extra attention to the inspection and maintenance of the engine's cooling system, including the radiator, thermostat, water pump, and fan, and ensure timely refilling of coolant. If the water temperature exceeds 100 degrees Celsius, it is advisable to park the car in a shaded area to cool down, let the engine idle, and open the hood to facilitate heat dissipation. Damage to the paint: Prolonged exposure to intense sunlight can be highly detrimental to the car's paint, as the ultraviolet (UV) rays in sunlight accelerate paint oxidation. Under strong sunlight, high temperatures and UV rays can cause the paint's oils to dissipate, leading to a reduction in the paint's gloss and color intensity. In severe cases, the paint may even crack. Brake failure: High temperatures in summer can also lead to brake malfunctions. Besides the usual issue of worn brake pads making braking difficult, other factors can contribute to brake failure. Engine overheating ("boiling over"): This term typically refers to when the engine's operating temperature exceeds the normal working range, affecting the engine's performance and potentially causing damage to the machine.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.