···
Log in / Register

What's the reason for the car not starting and making strange noises?

6Answers
SanGenevieve
08/25/2025, 11:42:33 PM

When the car doesn't start and makes strange noises, the reason is that the battery is dead. The strange noise comes from the starter. Here is some relevant information: 1. If you encounter this situation, you can ask a friend with a car to come and jump-start it, which can start the engine. 2. The battery is a very important component of a car. When the engine is not started, the battery supplies power to all the electronic devices in the car. The battery is also responsible for starting the engine. After the engine is started, the alternator supplies power to all the electronic devices and also charges the battery. If the battery is not functioning properly, it will cause the engine to fail to start. 3. The battery is a wearable part that needs to be replaced regularly. The battery in a car can generally last for 3 to 4 years, and some higher-performance batteries can last even longer. However, some car batteries fail before reaching that lifespan due to incorrect usage habits of the owner.

Was this review help?
114
Share
GrahamDella
09/08/2025, 12:28:37 AM

I've experienced this before—the car wouldn't start and made strange noises, like clicking or buzzing sounds. I was in a hurry at the time and tried turning the key multiple times with no response, but the weird noises only got louder, which scared me into stopping immediately. Later, when I took it to a mechanic, they said it might be a faulty starter motor—either the small gear on the motor wasn't engaging properly, or the battery was weak, causing the motor to strain and make noise. Additionally, a loose belt can squeak like a mouse during startup, which is super annoying. Oxidized battery terminals or loose wiring can also cause noises. It's best not to force it—turn off the engine and check if the headlights are bright. If they're dim, it's likely a battery issue. Get professional help right away to avoid turning a small problem into a big one.

Was this review help?
5
Share
Expand All
VonCarlos
10/22/2025, 12:32:27 AM

When it comes to a car failing to start accompanied by abnormal noises, I believe the focus should be on the starting system components malfunction. A worn-out starter motor may get stuck and produce a buzzing sound, while insufficient battery power can cause it to struggle with a squeaky noise, and a loose belt may generate a high-pitched screech. Other factors like flywheel wear or poor electrical circuit contact could also trigger unusual noises. I've tried this in my car—a simple method is to listen for the source during startup. If there's continuous clicking, the starter motor is highly suspect; replacing the battery when needed can save a lot of hassle. Don't overlook these during regular maintenance. When changing the engine oil, take the opportunity to inspect the starter motor and belts to prevent issues before they arise.

Was this review help?
5
Share
Expand All
DeZane
12/04/2025, 11:54:04 PM

If your car fails to start and makes abnormal noises, safety concerns should be taken seriously. I once witnessed a friend's car breaking down on the road with a metallic grinding sound, which was truly alarming. The main causes include motor overload or battery failure, and forcing a start could damage the engine. Stop immediately for an inspection, avoid multiple attempts to start the engine, turn on the hazard lights, pull over safely, and call for assistance. Regular maintenance such as battery health checks can prevent such troubles. Safety first—don't delay.

Was this review help?
8
Share
Expand All
VonDeclan
01/25/2026, 01:17:29 AM

When dealing with such issues, I start with the basics: pay attention to the type of abnormal noise during startup—clicking sounds often indicate starter motor problems, while squeaking may point to belt or battery issues. Next, check the brightness of the headlights; dim lights suggest insufficient battery power. Inspect the battery terminals for looseness or dirt, clean them, and try again. If that doesn't work, test the belt tension, and replace it immediately if cracks are found. These are all DIY steps that can save time. However, for critical issues, it's best to visit a repair shop for professional diagnosis with specialized tools, such as aging starter motors or wiring shorts that require expert handling.

Was this review help?
16
Share
Expand All
Norma
04/21/2026, 12:04:16 AM

There are several possible reasons why a car won't start and makes unusual noises: motor failure causing buzzing sounds from stuck gears; battery aging with low voltage leading to struggling starts and squeaking; loose belts producing sharp screeches; or poor cable connections resulting in abnormal noises. From my maintenance experience, these components have limited lifespans. Regular replacement of the battery every 2-3 years and motor inspection every 50,000 kilometers can prevent sudden failures. When issues arise, thoroughly investigate the root cause to prevent minor problems from escalating into major hazards that compromise driving reliability and safety.

Was this review help?
17
Share
Expand All
More Q&A

Can a Car Key Still Be Used After Falling into Water?

Can a car key still be used after falling into water? Yes, it can, as it has waterproof functionality. The steps to handle a car key that has fallen into water are: 1. Do not press any buttons immediately; 2. Wipe the surface dry with a cloth or tissue; 3. Open the key casing, remove the battery, and wipe away any internal moisture with a tissue; 4. Use a hairdryer on the cool setting to dry it thoroughly. Precautions for using a car key include: 1. Avoid contact with magnetic objects; 2. Avoid exposure to high-temperature environments; 3. Avoid hanging it together with other keys or accessories; 4. Replace lost keys promptly to prevent property loss; 5. Avoid storing spare keys inside the car; 6. Prevent smart keys from being dropped or impacted; 7. Ensure the correct battery model is used when replacing the key battery.
115
Share

Do I Need to Press the Clutch When Braking in Second Gear?

Whether to press the clutch when braking in second gear depends on how much speed you need to reduce. If the speed reduction is minimal, there's no need to press the clutch. However, if you need to significantly reduce speed without stopping, you should press the clutch first before braking. Here are a few scenarios: When the speed reduction is slight, such as decreasing from 70 km/h to 65 km/h, you can directly apply the brake without pressing the clutch. When you need to significantly reduce speed without stopping—for example, if you're in 5th gear at 70 km/h and need to slow down to 10 km/h—failing to press the clutch and applying heavy brakes will cause the vehicle to start shaking once the speed drops below a certain point (e.g., under 30 km/h). If the speed drops further or the vehicle stops, it may stall. In such cases, you should press the clutch first and then apply the brakes. The role of the clutch: The clutch allows the driving force of the car to increase gradually, enabling smooth starts. It temporarily separates the engine from the transmission for gear shifting, prevents overload in the drivetrain, and reduces torsional vibration impacts from the engine, thereby extending the lifespan of the transmission gears.
110
Share

What should the speed be when making a U-turn?

When making a U-turn, the maximum speed should not exceed 30 kilometers per hour, and the left turn signal must be activated in advance to avoid obstructing other normally moving vehicles and pedestrians. Permissible situations for making a U-turn: Intersections with U-turn signs: If there is a clear U-turn sign at the intersection, a U-turn can be made. If there is a U-turn traffic light, follow its instructions. If there is no traffic light, make the U-turn based on the specific situation without hindering other vehicles or pedestrians. Intersections without explicit prohibition of U-turns or left turns: If there is no explicit sign prohibiting U-turns, a U-turn can be made. 'No explicit prohibition' means the absence of 'No U-turn' signs, 'No Left Turn' signs, or solid center lines, allowing a confident U-turn. Yellow grid lines also permit U-turns: Yellow grid lines are no-parking zones, typically marked at intersections prone to congestion due to temporary stops, entrances of important institutions, or other necessary locations. Parking (including waiting at traffic lights) on these lines is a violation. Although stopping is prohibited, U-turns are allowed in yellow grid line areas unless there is a central barrier, making them equivalent to 'U-turn permitted.' Intersections with U-turn traffic lights: This is straightforward—if there is a U-turn traffic light, proceed only when it is green. Simultaneous 'No Left Turn' and 'U-turn permitted' signs: U-turns are allowed even if left turns are prohibited, but 'No U-turn' is not the same as 'No Left Turn.' Points to note when making a U-turn at an intersection: Observe road markings. If they are solid lines, U-turns are prohibited under any circumstances. Continue driving to find a suitable spot. If there is a 'No Left Turn' sign, even without a 'No U-turn' sign, U-turns are not allowed at that intersection because U-turns inherently involve a left turn. U-turns must be made from the innermost left-turn lane. If in the second left-turn lane, U-turns are not permitted at that intersection. Always yield to straight-moving vehicles. Only proceed with a U-turn if it does not interfere with their normal movement, or you will bear full responsibility for any accidents. Near intersection stop lines, lanes usually have guiding arrows. The leftmost lane may not always have a left-turn arrow; if it has a straight arrow, U-turns are prohibited even without explicit 'No U-turn' signs.
109
Share

Can black cars be used as wedding cars?

Black cars can be used as wedding cars. Black is the most frequently chosen color, a classic hue that is solemn, elegant, and dignified. It also complements the bride's wedding dress, making it look very classy. Reasons for choosing black cars: Black wedding cars better highlight their grandeur and carry a sacred and solemn atmosphere, which is an important reason why many people choose black as the color for their wedding cars. Introduction to wedding cars: Wedding cars are the vehicles used by the couple to pick up the bride during the wedding. Marriage is a major life event, so for the newlyweds, a beautifully decorated wedding car with flowers and ribbons is essential in the wedding process. A grand and spacious lineup of luxury wedding cars can better fulfill their dreams.
120
Share

What is the right lane?

If it is an ordinary road, the far right lane is the slow lane; if it is a highway, it is the emergency lane. Introduction to the slow lane: According to motor vehicle traffic regulations, if there are two or more motor vehicle lanes in the same direction on the road, the left lane is the fast lane, and the right lane is the slow lane. Motor vehicles driving in the fast lane should travel at the speed specified for the fast lane. If they cannot reach the specified speed, they should drive in the slow lane. Introduction to the emergency lane: The emergency lane on a highway refers to the part of the road adjacent to the right driving lane, including the hard shoulder, with a width of more than 3 meters and an effective length of 30 meters or more, which can meet the needs of motor vehicle parking. In emergency situations, vehicles can drive or park in the emergency lane.
118
Share

How to Open a BAIC Car Key?

Press the button on the remote key to release the stainless steel key. Place the key with the icon side facing up. Hold the two ends of the key with your left index finger and thumb, aligning them with the pattern. Place your right thumb on the right side of the keychain. While holding both sides of the key with your left hand, press down firmly with your right thumb to widen the curved gap in the middle, then pull both hands outward simultaneously. Forcefully separate the unpatterned half from the middle gap. Between the two parts, you will find a rubber strip to prevent dust from entering.
107
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.