···
Log in / Register

What kind of engine oil is suitable for Dongfeng AX7?

1Answers
DiCameron
07/24/2025, 07:36:32 AM

Dongfeng Fengshen AX7 should use 5W-30 full synthetic engine oil. The following is an introduction about car engine oil: 1. Function: The engine is the heart of a car. Engine oil, or engine lubricant, can lubricate, clean, cool, seal, and reduce wear on the engine. 2. Grade: The engine oil grade includes two parts: classification and viscosity specification. The engine oil grade usually indicates viscosity and quality. W stands for winter, and the smaller the number before it, the better the low-temperature fluidity of the engine oil, indicating a lower usable ambient temperature and better protection for the engine during cold starts. The number after "W" (after the dash) is an indicator of the oil's high-temperature resistance. The larger the number, the better the protection performance of the oil at high temperatures.

Was this review help?
106
Share
More Q&A

How to Fix the Black Screen Issue on the Mazda3 Axela Display?

Car power supply voltage issue: First, check the stability of the car's power supply voltage to rule out the possibility of voltage fluctuations. Car navigation cables: If the voltage is stable, then inspect the cables on the back of the device for any issues, which can be directly ruled out by replacement. If there is only no image but sound is still present, it indicates that the power plug of the navigation display is loose.
120
Share

How to Remove the Steering Wheel of a New Santana?

First, the steering wheel removal mechanism is located on the backside of the steering wheel. After turning off the engine, shut down all electrical devices and turn the steering wheel 90 degrees. Then, use an appropriate tool to poke the hole on the back of the steering wheel. Turn the steering wheel back in the opposite direction by 90 degrees and poke the other hole to release the airbag. Next, there are two small holes on the back of the steering wheel. First, remove the combination switch cover, which is secured by three screws. If it hasn't been removed before, there might be a leather cover on the outside.
117
Share

How to Restore the Start-Stop Function in the Envision?

Generally, vehicles equipped with an automatic start-stop system have it enabled by default. It is possible that the system was turned off accidentally by pressing the automatic start-stop button on the car. The design of the automatic start-stop system varies across different models and brands, and certain conditions must be met. Specifically, the seatbelt must be fastened.
109
Share

How to Register the Replacement of an Old Engine?

The original and photocopy of the vehicle owner's ID card; if it's a non-local ID, also prepare the original temporary residence permit and proof of engine replacement for the vehicle. Drive the vehicle with the replaced engine to the vehicle management office, go to the service hall to fill out the application form for engine replacement and vehicle inspection form for changing the vehicle's registration certificate.
112
Share

How to Solve Heavy Steering in a Prado?

There is a lack of lubricating oil in the screws inside the steering wheel. This requires removing the steering wheel cover and adding lubricating oil inside. The steering gear may also malfunction. Usually, if the steering is turned too fully during turns, it places a greater load on the steering gear.
102
Share

How to set the lock alarm sound for Lavida Plus?

Press the brake pedal, shift the gear lever to P position, and release the brake pedal. Press the one-touch start button twice in succession, and close all doors. Hold the lock button on the driver's door for more than 10 seconds.
108
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.