···
Log in / Register

What Items Are Included in a Major Car Maintenance?

6Answers
McElliott
07/24/2025, 01:30:51 AM

Generally, a major car maintenance involves replacing all vehicle fluids plus the oil filter, air filter, cabin air filter, and fuel filter. The major car maintenance items are as follows: 1. Change engine oil, replace oil filter, clean air filter, clean cabin air filter, check antifreeze, brake fluid, power steering fluid, brake pads, brake discs, shock absorbers, and shock absorber rubber bushings; 2. Check for loose important screws, inspect rubber bushings on suspension arms, chassis, adjust wipers, lubricate hood hinges, lubricate door hinges, tighten hinge screws, lubricate sunroof, and clear clogged fuel filler drain; 3. Clean the engine compartment, and also use a computer to read for any fault codes, perform maintenance reset, etc.

Was this review help?
108
Share
ClaytonLynn
08/10/2025, 07:31:33 PM

Major Car Maintenance Items I've accumulated quite a bit of experience from long-term driving. It's like a comprehensive check-up, typically involving an oil and oil filter change to keep the engine clean and lubricated, preventing part wear. The air filter and fuel filter must also be replaced to ensure the intake and fuel systems remain free of impurities. Then, spark plugs are inspected or replaced to improve combustion efficiency and reduce vibration and fuel consumption. The braking system is a key focus, including checking brake pad wear, draining old brake fluid and adding new fluid, which is crucial for emergency braking safety. Tire maintenance, such as rotation, balancing, or checking pressure to prevent blowouts, ensures strong grip. Coolant flushing prevents engine overheating and damage, with additional items like light testing and battery condition checks. Overall, it costs a few hundred dollars but extends the car's lifespan. Doing it every 30,000 to 40,000 kilometers is cost-effective, saving on repairs and ensuring peace of mind. I remember the last time I did it, the car's performance was restored like new. I recommend doing it early to prevent trouble.

Was this review help?
11
Share
Expand All
OAdalynn
09/24/2025, 02:46:09 AM

My understanding of major maintenance comes from personal experiences and friends' sharing. The main items include changing the engine oil and oil filter, which are basic operations to clean internal engine impurities. Next is replacing the air filter to protect the engine from dust, and the fuel filter to ensure smooth fuel flow. If the spark plugs are old, replacing them can improve fuel efficiency. Brake inspection is essential, such as checking brake pad thickness and replacing brake fluid to prevent loss of control in emergencies. Tire inspection and balancing extend their lifespan, while coolant replacement prevents overheating failures. Small items like light testing and battery maintenance are also included. A full service takes about half a day and costs a few hundred yuan, which is worth it to avoid the risk of breaking down on the road. After my recent maintenance, I feel the car accelerates more smoothly, especially giving me more confidence on long trips.

Was this review help?
10
Share
Expand All
DylanAnn
11/07/2025, 09:09:59 PM

In my multiple experiences with vehicle maintenance, major servicing involves several key points. It includes changing the engine oil and oil filter to protect the engine and prevent excessive wear. Replacing the air filter prevents dirt from entering, while inspecting and replacing spark plugs optimizes ignition. The brake system requires checking the condition of brake discs and pads, along with changing the brake fluid to ensure quick response. Tire maintenance involves balancing and maintaining proper air pressure to prevent unstable grip. Coolant replacement helps avoid overheating issues. These simple steps ensure safety and reliability, making the time spent on a major service worthwhile.

Was this review help?
5
Share
Expand All
McElena
12/28/2025, 10:56:58 PM

I often do car maintenance myself, covering some major service items. Simple tasks like changing the engine oil and oil filter save money. Replacing the air filter is quick and prevents intake issues. Changing spark plugs requires tools but improves combustion efficiency. However, brake inspections are complex—leave fluid level adjustments to professionals for safety. Flushing and refilling the cooling system prevents freezing. Tire rotation is challenging without proper equipment. Overall, it saves hundreds but takes time to learn the skills. It's rewarding and helps prevent major repairs.

Was this review help?
5
Share
Expand All
SanRyder
03/26/2026, 01:37:50 AM

From a cost-saving perspective, I choose essential items for major maintenance. Changing engine oil and oil filters is core to protecting the engine and reducing repair costs. Replacing air filters is inexpensive and improves fuel efficiency, saving money. Spark plug replacement prevents increased fuel consumption and waste. Brake inspections prevent premature wear and save on repair costs. Tire maintenance, such as pressure adjustments, extends lifespan and reduces replacement costs. Coolant replacement prevents overheating and major repair expenses. Overall, keeping it within a reasonable budget and performing it every 50,000 to 60,000 kilometers is more economical and safer in the long run.

Was this review help?
1
Share
Expand All
More Q&A

What is the method to determine if the inner CV joint is damaged?

Methods to determine if the inner CV joint is damaged include: 1. Abnormal noises when the steel balls are stuck; 2. Crushed steel balls, where the engine's power cannot be transmitted to the wheels, rendering the vehicle immobile. The inner CV joint consists of a bell-shaped housing, tripod bearing or steel balls, dust cover, retaining ring, and grease. The CV joint, also known as a constant velocity joint, functions to transmit the engine's power from the transmission to the two front wheels, enabling the car to drive at high speeds. The friction surface of the CV joint has high rigidity and requires a rubber boot for protection to prevent water and sand particles from entering. Ingress of sand particles can accelerate wear, create gaps, and cause damage to the front axle steering ball joint rod boot and the entire suspension system.
101
Share

Where is the manufacturing location of the Haval H6?

The manufacturing location of the Haval H6 is in Baoding City, Hebei Province. Taking the 2021 Haval H6 as an example, it belongs to the compact SUV category, with body dimensions of: length 4615mm, width 1860mm, height 1720mm, a wheelbase of 2680mm, a fuel tank capacity of 58 liters, and a curb weight of 1675kg. The 2021 Haval H6 features a MacPherson independent front suspension and a double-wishbone independent rear suspension. It is equipped with a 1.5L turbocharged engine, delivering a maximum horsepower of 150PS, a maximum power of 110kW, and a maximum torque of 210Nm, paired with a 6-speed manual transmission.
102
Share

What are the symptoms of an engine blowout in a car?

The symptoms of an engine blowout in a car include: excessive pressure causing the piston to seize, which may result in flames being ejected. The methods to handle an engine blowout are: 1. Allow the engine to cool down and turn it off, then remove the radiator cap to ensure the engine is cool; 2. Drain the coolant into a bucket; 3. Close the drain plug and fill the radiator with water; 4. Start the engine, turn on the heater control system, add cooling system cleaner, and let the engine idle for 30 minutes; 5. Turn off the engine and let it cool for 5 minutes, then drain the liquid from the radiator; 6. Close the drain plug, fill the radiator with water, and let the engine idle for 5 minutes; 7. Refill with a 50/50 mixture of water and ethylene glycol antifreeze/coolant compound.
111
Share

What are the differences between BMW X6 and X6M?

The differences between BMW X6 and X6M are: 1. Different power: The BMW X6 is equipped with a 2.0T turbocharged engine with a maximum power of 195kW; the BMW X6M is equipped with a 4.4L twin-turbocharged engine with a maximum power of 441kW. 2. Different tires: The BMW X6 tire models are 275/40R20 and 315/35R20; the BMW X6M tire models are 285/35R21 and 325/30R21. 3. Different body dimensions: The BMW X6 has a body length of 4947mm, width of 2004mm, height of 1698mm, and a wheelbase of 2975mm; the BMW X6M has a body length of 4941mm, width of 2019mm, height of 1699mm, and a wheelbase of 2972mm.
106
Share

Is the BMW 4 Series an Imported or Domestically Produced Vehicle?

BMW 4 Series is an imported vehicle. Domestically Produced BMW Models: BMW 1 Series, BMW 2 Series Tourer, BMW 3 Series, BMW 5 Series, BMW 5 Series New Energy, BMW X1, BMW X1 New Energy, BMW X3. Domestically produced BMW vehicles purchased in China are marked with "Brilliance BMW" at the rear of the car. Any BMW with "Brilliance BMW" at the rear indicates it is a domestically produced model. BMW Imported Models: BMW X5, BMW 7 Series, BMW 5 Series (Imported), BMW X6, BMW X4, BMW 6 Series GT, BMW 3 Series GT, BMW X2, BMW 4 Series, BMW 3 Series (Imported).
104
Share

Where is the OBD interface located in a sedan?

The OBD interface in a sedan is located in: 1. The lower left side of the dashboard; 2. Above the pedal; 3. In front of the gear shift lever. The working principle of the OBD interface is: it continuously monitors the engine's operating conditions to check if the vehicle's exhaust exceeds the standard. Once it exceeds the standard, a warning will be issued immediately. When a system failure occurs, the fault light or check engine warning light will illuminate, and the powertrain control module will store the fault information in the memory. Through a certain program, the fault code can be read from the PCM. The devices detected by the OBD interface include: engine, catalytic converter, particulate trap, oxygen sensor, emission control system, fuel system, EGR.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.