···
Log in / Register

What is the wiper size of the Lynk & Co 01?

6Answers
DelBryce
08/30/2025, 10:16:09 PM

The driver-side wiper length is 61 cm. Below is the relevant information: 1. Powertrain: Equipped with a 2.0TD turbocharged engine from the Drive-E series, with a maximum power of 140kW/4500rpm and a maximum torque of 300Nm/1400-4000rpm. Its fuel consumption per 100 kilometers is under 7L, with the two-wheel-drive model at 6.5L/100km and the four-wheel-drive model at 6.9L/100km. The 0-100km/h acceleration times are 7.7s and 7.9s, respectively. 2. Features: The Lynk & Co 01 adopts a comprehensive NVH luxury configuration, which prevents noise and vibration at the source; it blocks noise transmission paths, optimizes sound quality, making it purer and more stable in frequency. It is equipped with an INFINITY Hi-Fi level 10-speaker audio system with a total power of 360W, offering a premium car-level audio configuration.

Was this review help?
109
Share
AlinaRose
09/12/2025, 01:49:20 AM

I always thought the driver-side wiper of the Lynk & Co 01 was 26 inches, and the passenger-side was 18 inches. This size combination perfectly covers the windshield without leaving any gaps or scratching the frame. Once during rainy weather, I noticed blurry vision while driving, and upon measuring the old wipers, I realized they were slightly undersized. After replacing them with the correct new sizes, the cleaning effect improved significantly, making driving much safer. The replacement process is simple: lift the wiper arm, remove the old blade, and snap on the new one. Choosing frameless wipers reduces noise and increases durability. I check the wiper wear every six months, especially during rainy seasons. Avoid buying cheap knock-offs with non-standard sizes, as they can cause problems and impair visibility. Maintaining wipers is effortless and can save on repair costs.

Was this review help?
15
Share
Expand All
BentleyMarie
10/26/2025, 02:37:57 AM

After driving the Lynk & Co 01 for a long time, remember that the wiper size for the driver's side is usually 26 inches, and the passenger side is 18 inches. This well-designed specification ensures clear visibility during rainy days. Choosing the wrong size may leave water stains at the edges of the windshield, posing a risk while driving. I once experienced wiper slippage on the highway, which almost caused an accident. Since then, I always confirm the size match when replacing them. Beam-style wipers provide more even cleaning and are recommended as a priority. Additionally, using good wiper fluid can enhance performance and prevent freezing. It's advisable for car owners to regularly spray some cleaning fluid to test the wiper's wiping effect. With the right size and longer lifespan, driving becomes safer and more worry-free.

Was this review help?
18
Share
Expand All
MacEsther
12/09/2025, 01:57:34 AM

Understanding car details is my habit. The Lynk & Co 01 wiper blade size is approximately 26 inches for the driver's side and about 18 inches for the passenger side. Choosing the correct size ensures a perfect fit for the windshield curvature, enhancing cleaning efficiency. The size pairing is based on the vehicle's design to minimize excessive movement and reduce noise. When purchasing, pay attention to the type, such as silicone wipers, which are more heat-resistant and durable. Check for wear and size deviation every few tens of thousands of kilometers, as incorrect sizing can affect the wiping range. Using wiper fluid and proper maintenance makes daily upkeep simple and convenient, requiring no professional tools.

Was this review help?
9
Share
Expand All
VanBrantley
01/29/2026, 03:08:40 AM

After using the Lynk & Co 01, I found the wiper sizes of 26 inches for the driver side and 18 inches for the passenger side to be perfectly matched. Driving on highways during rain doesn't obstruct the view. When replacing the wipers, I measured the old ones to ensure the correct size – too large causes more noise, while too small leaves residual water, which is hazardous. I advise friends to take a photo of their old wipers with their phone for easy comparison when buying new ones. Size is crucial, combined with seasonal maintenance like changing to antifreeze wiper fluid before winter to prevent clumping. Choosing frameless types is quieter and more convenient; the right size makes driving easier and safer.

Was this review help?
3
Share
Expand All
MacChloe
04/24/2026, 02:33:27 PM

As an experienced user, I confirm that the standard configuration for the Lynk & Co 01 wiper blades is 26 inches for the driver's side and 18 inches for the passenger side, which ensures comfortable and reliable daily use. Smaller sizes may impair visibility in rainy conditions, while larger ones wear out faster. It's advisable to check the spring tension quarterly to ensure it's properly adjusted. When replacing, use a towel to protect the glass from scratches, and opt for compatible wiper blades to save both money and time. For maintenance, adding professional wiper fluid and performing regular cleaning can prevent dirt buildup. Choosing the right size enhances lifespan, ensures worry-free driving with improved safety, and facilitates subsequent maintenance.

Was this review help?
18
Share
Expand All
More Q&A

What to Do When Your Driver's License Exceeds the Six-Year Validity Period?

After your driver's license exceeds the six-year validity period, you need to check the expiration time. The relevant information is as follows: 1. If it has been expired for less than one year, you can still renew it without a fine. If it has been expired for more than one year, the vehicle management office will revoke your driver's license. 2. If your revoked driver's license has not exceeded two years, you can take the Subject 1 test at the vehicle management office. Passing the test will restore your driving qualification, and then you can renew your license. If your revoked driver's license has exceeded two years, you will have to retake all the tests. Below are the relevant materials for license renewal: 1. Materials required for renewal application: (1) "Motor Vehicle Driver's License Application Form". (2) Identity proof of the motor vehicle driver. (3) Motor vehicle driver's license. (4) A medical certificate issued by a county-level or above medical institution or a military regiment-level medical institution. (5) The motor vehicle driver can authorize an agent to handle renewal, replacement, submission of medical certificates, extension, and cancellation procedures. (6) Three recent one-inch bareheaded, white-background color photos. 2. Vehicle management office procedures: (1) Undergo a physical examination at a county-level or military regiment-level medical institution. (2) Take a number at the vehicle management office, traffic police branch, or district (city) traffic police team and submit the materials at the acceptance window. (3) Pay the relevant fees at the payment window. (4) Collect the driver's license at the license and certificate window. 3. Processing time: If all requirements are met and the procedures are complete, it will be processed on the spot. 4. Processing unit: The vehicle management office of the traffic management department of the public security authority where the motor vehicle driver's license was issued.
105
Share

How to Test the Condition of a Car Battery?

Here are several methods to test the condition of a car battery: 1. Perform a starting test on the car or electric vehicle: Use the car key to start the engine. If the key fails to start the car after insertion, and the vehicle has not been left unused or discharged for an extended period, it can be preliminarily judged that the battery is severely aged and needs replacement. 2. Conduct a discharge test on the car: After driving the car normally for a while, if it will not be used for some time, turn the key to the circuit-on position and then turn on the headlights. If the headlights go out within a day or two, it can be determined that the battery is aging. 3. Observe the sound level of in-car electronic devices like the radio during the starting process: If the sound fluctuates between loud and soft, it indicates unstable battery output. 4. Check for white crystalline deposits on the two electrodes of the battery: If there are many deposits, it indicates severe battery sulfation, and replacement is needed. 5. Check the production date and specifications on the battery cover: If the production date is ten years or older, replacement is recommended. 6. Test the battery voltage under no-load conditions: Use a multimeter to measure the battery voltage under no-load conditions. The voltage should be 12V and very stable. If the voltage is too low or fluctuates, it indicates battery aging. 7. Monitor the voltage indicator: Connect the multimeter to the battery's positive and negative terminals, start the car, and turn on the air conditioning. If the voltage drops significantly, it indicates battery aging.
109
Share

What are the reasons for a car suddenly stalling while driving?

There are several reasons why a car may suddenly stall while driving: 1. Electrical circuit failure: Stalling due to low-voltage power interruption during driving, mainly check the ignition and starter switches as well as the fuse box. 2. Stalling caused by a short circuit in the low-voltage line. 3. Component failure: Usually, issues with the ignition coil, capacitor, or electronic ignition module. 4. Fuel system failure: Damage to the fuel pump, fuel pipe rupture, clogged carburetor fuel inlet, or an empty fuel tank can all cause sudden stalling. 5. Ignition system problems or issues with the engine overheating anti-explosion system. 6. Driver's lack of proficiency leading to stalling, especially improper coordination between the throttle and clutch in manual transmission cars.
120
Share

Is It Normal for a Car to Shake Violently at the Moment of Ignition?

The reason for a slight shake at the moment of ignition is the cold start of the vehicle, which can sometimes cause minor vibrations. As long as the shaking is not too severe and does not last long, it is considered normal. However, persistent shaking is abnormal. Here are the general reasons for car ignition shaking: 1. Incomplete combustion of gasoline in the engine, resulting in insufficient power, or a stuck or clogged fuel injector. Most engine shaking is caused by insufficient fuel supply due to clogged or stuck fuel injectors, leading to power loss. 2. Aging spark plugs due to prolonged use can cause the electrode gap to widen, leading to insufficient ignition energy and poor gasoline atomization. Additionally, many modern cars have three- or four-cylinder engines, each with a spark plug. These spark plugs can also develop widened gaps, causing power differences between cylinders and resulting in vehicle shaking. 3. Excessive carbon buildup in the engine's intake manifold and valves, which may be caused by a dirty throttle body or too much carbon buildup in the fuel injectors and intake passages. During a cold start, carbon deposits can absorb some fuel, preventing it from fully entering the combustion chamber. This leads to unstable idling, and during a cold start, carbon deposits may absorb some gasoline, causing the air-fuel mixture in the engine cylinders to become too lean, resulting in engine shaking and difficulty starting.
117
Share

How to Test Engine Oil with Qualitative Filter Paper?

Use the oil dipstick to place 1-2 drops of engine oil in the center of the qualitative filter paper. Place the filter paper with oil drops on a flat surface, ensuring the back of the paper does not touch any object to avoid affecting the oil diffusion. Let it stand at room temperature for 0.5-1 hour, then observe the spot pattern. Additional information: 1. The purpose of the filter paper spot test method is to determine the clean dispersing performance of lubricating oil containing detergent-dispersant by observing its diffusion into spots on the filter paper. 2. The standard categorizes spot patterns into four grades. (1) Grade 1: The deposit ring and diffusion ring of the oil spot have no clear boundary; the entire spot is uniform in color, with a light and bright oil ring, indicating good oil quality. (2) Grade 1-2: The deposit ring of the oil spot is dark in color, the diffusion ring is relatively wide, and there is a clear boundary between the two rings. The oil ring appears in varying shades of yellow, indicating the oil is prone to contamination. Oil filtration should be enhanced, but the lubricating oil can still be used. (3) Grade 2-3: The deposit ring is dark black with dense deposits, the diffusion ring is narrow, and the oil ring darkens, indicating the oil quality has deteriorated. (4) Grade 3-4: The oil spot only has a central deposit ring and an oil ring, with no diffusion ring. The deposit ring is pitch black and thick, not drying easily.
104
Share

What are the reasons for no response when turning the key to start the car?

There are several reasons why the car does not respond when turning the key to start: 1. The ignition switch is not properly engaged or is damaged. 2. The wire from the ignition switch to the starter relay is disconnected. 3. The starter's fuse box is burned out. 4. The starter relay is damaged. 5. The starter is damaged. 6. The remote control is locked. 7. For automatic transmission, check if it is in the correct gear, and inspect the starter relay and motor issues. For manual transmission, check the clutch and ignition switch problems. Solutions are as follows: 1. First, check if the car battery has power by turning on the headlights to see if they light up. 2. Listen for sounds when starting. If there is no sound at all but a clicking noise, it indicates the starter solenoid is faulty. Replace the starter or the solenoid. 3. If there is no sound at all, it might be due to worn-out carbon brushes. You can replace the carbon brushes or the starter, but also check the fuse, starter relay, ignition switch, and starter, as these could also be the cause of the problem.
104
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.