···
Log in / Register

What is the weight of the T-Roc?

6Answers
VonSebastian
07/24/2025, 01:42:34 PM

The weight of the Volkswagen T-Roc is 1385kg. Taking the 2020 Volkswagen T-Roc as an example, its specifications are as follows: 1. Body dimensions: Length, width, and height are 4318mm, 1819mm, and 1582mm respectively, with a wheelbase of 2680mm. 2. Suspension: Front suspension is MacPherson strut independent suspension, and rear suspension is multi-link independent suspension. 3. Powertrain: Equipped with a 1.4L turbocharged engine, delivering a maximum horsepower of 150ps, maximum power of 110kw, and maximum torque of 250nm, paired with a 7-speed dual-clutch transmission.

Was this review help?
117
Share
SanIsabella
08/10/2025, 04:14:58 AM

The weight of the T-Roc mainly depends on the specific configuration, generally ranging between 1,350 kg and 1,500 kg. For example, the 1.4T version of the T-Roc weighs approximately 1,380 kg when driven, and in my actual driving experience, it feels quite solid. It doesn’t feel unstable at high speeds, and the body stability is good when taking corners. This weight also ensures reasonable fuel economy, with city driving consuming around 7-8 liters per 100 km, which isn’t too expensive. When I use the car for family trips, the space utilization is high, and loading luggage in the trunk doesn’t affect handling. The weight design is well-balanced—not too light to compromise safety, nor too heavy to add burden. Volkswagen’s chassis tuning indeed has its advantages.

Was this review help?
11
Share
Expand All
LaCarmen
09/25/2025, 10:29:48 PM

When choosing the T-Roc, weight is a key factor to consider. It typically ranges between 1,350 and 1,500 kilograms, depending on the engine and configuration. Heavier cars offer more stability and safety at high speeds, while lighter ones are more fuel-efficient, like the 1.4T version at around 1,380 kg, which is ideal for city commuting. I paid special attention to this when buying my car, as weight affects both fuel consumption and space efficiency. The T-Roc strikes a good balance, with a spacious rear seat that meets family needs. I recommend test-driving different versions to feel the differences in weight, as this significantly impacts daily driving experience.

Was this review help?
13
Share
Expand All
HaleyAnn
11/08/2025, 11:33:16 PM

The weight of the T-Roc ranges approximately from 1,350 kg to 1,500 kg, with the common 1.4T model weighing around 1,380 kg. This value impacts both safety and handling. A heavier vehicle can better absorb collision impacts, enhancing protection; however, excessive weight increases fuel consumption. Choosing the right version is crucial. Volkswagen's design ensures even weight distribution, making the car less prone to roll during driving and providing peace of mind during use.

Was this review help?
6
Share
Expand All
DiCaleb
12/30/2025, 01:18:21 AM

From a technical perspective, the T-Roc weighs approximately 1,380 to 1,500 kilograms, depending on the version. Weight determines performance factors—lighter models like the 1.4T accelerate faster, while heavier ones like the 1.5T offer more stability in braking and handling. In my research on vehicles, I found that weight affects fuel consumption and power output, which Volkswagen has optimized to deliver agile and balanced driving. When choosing, consider your usage scenario—lighter versions are preferable for urban driving.

Was this review help?
11
Share
Expand All
DeMolly
03/27/2026, 03:29:03 AM

Weight plays a crucial role in automotive safety. The T-Roc typically weighs around 1,400 kilograms, which allows it to better absorb collision energy and protect passengers. Volkswagen's test results confirm this, demonstrating that the car's sturdy body structure reduces risks. In daily driving, the weight also enhances stability, making the vehicle less prone to losing control, especially in adverse weather conditions. I recommend that owners regularly inspect their vehicle's structure to ensure the weight design maintains its safety effectiveness, as developing safe driving habits is essential.

Was this review help?
16
Share
Expand All
More Q&A

What is the width of a sedan?

Generally, the body width of a sedan ranges between 1600mm and 2000mm. Vehicle width refers to the distance between two planes parallel to the vehicle's longitudinal symmetry plane and respectively touching the fixed protruding parts on both sides of the vehicle (excluding rearview mirrors, side marker lights, turn signals, flexible fenders, and the deformation of the tire-ground contact area). In terms of sedan classifications, A-segment cars refer to small cars, B-segment cars refer to mid-range cars, C-segment cars refer to premium cars, and D-segment cars refer to luxury cars. For passenger vehicles, if three seats are to be arranged side by side with sufficient width, the vehicle width generally needs to reach 1800mm. However, since an excessively wide body reduces maneuverability and parking convenience in urban areas, a width of 2000mm is widely recognized as the upper limit for passenger vehicles. Vehicles approaching or exceeding 2000mm in width can be very difficult to drive.
113
Share

What is the preparation sequence for getting into the car in Subject 2?

Subject 2 preparation sequence for getting into the car involves first walking around the vehicle to check for any abnormalities in the tires; then entering the car, adjusting the seat, fastening the seat belt, and adjusting the mirrors; checking if the handbrake is engaged, if the gear is in neutral, and if the light switches are reset; once everything is ready, follow the instructions to input your fingerprint and begin the test. Important notes for the Subject 2 test: Stopping midway during the test is not allowed. At the start of each test item, there will be a voice prompt in the car, such as 'Please reverse into the parking space,' indicating the official start of that test item. You can only stop when moving from one test item to the next, before the voice prompt for the next item begins. During the test, if any step is not performed correctly and results in a deduction of points, there will be a voice prompt. If you pass, there will be no sound, and you can proceed directly to the next item. After completing the slope fixed-point parking and starting, there will be a voice prompt in the car. If you pass, it will say 'Test passed, please go to the test center to print your results.' If you fail, it will say 'Test failed.'
105
Share

What Does Stage 2 Mean for Cars?

Stage 2 for cars refers to flashing a Stage 2 ECU system, which requires hardware modifications to the vehicle to adapt to the system. This results in a significant power increase, but the modification work also becomes more extensive. It involves adapting the original car's intake, exhaust, blow-off valve, suspension, and other components. Below are introductions to other stages: Stage 1: Flashing an ECU program that offers slight improvements while still being compatible with all original factory components. It can provide a minor increase in power output. The advantage is that no hardware modifications are needed, and it has almost no impact on daily use (e.g., fuel type). Stage 3: Stage 3 requires modifying more parts to adapt to the program. Based on Stage 2, it further includes upgrades to core components such as the turbocharger and intercooler. However, the vehicle's practicality may be somewhat compromised compared to the factory setup. Custom Tune: A custom tune requires an ECU tuner to perform on-site adjustments, whereas the previous stages only involve direct flashing. The tuning is tailored to the actual condition of each car until the owner is satisfied with the program.
107
Share

What is the time limit for handling vehicle violations?

If a vehicle violation requires a fine, it must generally be paid within 15 days. If the party fails to fulfill the administrative penalty decision within the specified time, the administrative authority that made the penalty decision may take the following measures: a 3% late fee will be added daily for overdue fines, and the case may be submitted to the People's Court for compulsory enforcement. If a motor vehicle driver's demerit points do not reach 12 within a scoring cycle and the fine has been paid, the demerit points will be cleared. If the demerit points do not reach 12 but the fine remains unpaid, the demerit points will carry over to the next scoring cycle. The party must pay the fine at the designated bank within 15 days from the date of receiving the administrative penalty decision. For fines imposed on pedestrians, passengers, or non-motor vehicle drivers, if the party raises no objection, the fine may be collected on the spot. The fine must be issued with a unified receipt from the provincial, autonomous region, or municipality finance department. If such a receipt is not provided, the party has the right to refuse payment.
114
Share

How to turn on the rear air vents of Model 3?

To turn on the rear air vents of Model 3, simply tap the relevant option on the air conditioning interface of the display screen. Here is some additional information: 1. How hidden air vents work: Hidden air vents use a long strip-style vent to distribute airflow from the center console, resulting in more uniform air distribution throughout the cabin and effectively improving the airflow organization inside the vehicle. 2. Advantages of hidden air vents: This continuous design allows air to flow more smoothly from the air ducts, which can effectively reduce the noise of the air conditioning system to some extent. Another benefit of the continuous air vent design is that it effectively reduces the vertical height of the center console, providing better driving visibility for passengers and more interior space for movement.
113
Share

What is the torque specification for the cylinder head bolts on a Hino J05 engine?

The torque specification for the cylinder head bolts on a Hino J05 engine is 8-9 kg·m. The tightening torque for cylinder head bolts should be determined based on the bolt specifications, and the exact value must follow the requirements stated in the user manual. Method for tightening cylinder head bolts: First, tighten from the center outward in sequence, applying 50% of the final torque initially, then fully loosen all bolts. Next, tighten again from the center outward to 50% of the final torque. Finally, follow the center-outward sequence once more to fully tighten the cylinder head bolts. Precautions when tightening cylinder head bolts: Avoid over-tightening, as excessive force may cause the bolts to exceed their load capacity, potentially leading to stripped threads or even bolt breakage. Therefore, always verify the specified torque value before tightening.
109
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.