···
Log in / Register

What is the weight of the Bora Legend body?

6Answers
HoldenMarie
07/29/2025, 07:32:14 AM

Bora Legend manual transmission model has a curb weight of 1240Kg, while the automatic transmission model weighs 1275Kg. The differences between Bora and Bora Legend are as follows: Different tire specifications: Bora tire specification is 195/65r15; Bora Legend tire specification is 205/55r16. Different body dimensions: Bora body length, width, and height are 4663mm, 1815mm, and 1462mm respectively; Bora Legend body length, width, and height are 4562mm, 1793mm, and 1468mm respectively. Different engine models: Bora engine model is ea211dmb; Bora Legend engine model is ea211dlf. Different platforms: Bora is built on the MQB platform; Bora Legend is built on the PQ34 platform.

Was this review help?
106
Share
GeorgeRose
08/13/2025, 03:24:58 PM

My Bora Legend is the manual transmission version, with a body weight of about 1,280 kg. It feels quite stable to drive, especially on the highway where it doesn't feel floaty. The slightly heavier weight makes the car feel more solid and improves handling during turns, but daily fuel consumption is a bit higher—I average around 7 liters per 100 km. Friends looking to save money might opt for a lighter car, but safety should still be a priority. I recommend checking the owner's manual for the exact weight before buying, as automatic or higher-spec versions can weigh up to 1,350 kg. Tire wear is also faster, so I check the suspension and brake system every six months to avoid safety risks. Regular maintenance is key to prevent the weight from accelerating component wear.

Was this review help?
10
Share
Expand All
EleanorFitz
10/08/2025, 12:57:11 AM

As a car enthusiast, I've carefully checked the weight data of the Bora Legend. The manual version typically weighs 1,280 kg, while the automatic version can reach up to 1,350 kg. This weight design is quite clever, ensuring both high crash safety ratings and a balance between handling and comfort. A friend who test-drove it mentioned that the acceleration isn't slow, but the fuel consumption is relatively high in city driving. The weight affects the actual driving experience, such as shorter emergency braking distances and better durability. When choosing a car, don't just focus on lightweight; safety and durability are important. Keeping the air filter clean can slightly improve fuel efficiency—just a little tip to share with everyone.

Was this review help?
8
Share
Expand All
DiKaleb
11/21/2025, 01:16:38 AM

From a practical perspective, the Bora Legend has a body weight of approximately 1,280 kg, with the base model being quite moderate. The heavier weight makes the car more robust, providing a sense of security while driving, especially when carrying family members. Fuel consumption is slightly higher, with over 7 liters per 100 km in city driving. Daily driving requires attention to faster tire wear; it's recommended to check tire pressure every three months to extend their lifespan. Weight isn't the sole indicator; combining budget and safety is more important. If fuel efficiency is a priority, avoid heavier models—lighter cars are better for city commuting.

Was this review help?
3
Share
Expand All
Lincoln
01/11/2026, 02:52:47 AM

I'm very concerned about the impact of vehicle weight on environmental protection. The Bora Legend's body weight ranges between 1,280 to 1,350 kg, which increases fuel consumption and carbon emissions. When I drove this car, the urban fuel consumption was around 7.5 liters - too heavy to be low-carbon. I recommend choosing lightweight configurations like the base model for better fuel efficiency. Weight affects overall performance; lighter vehicles offer more agile handling but may be slightly more fragile. Balancing safety and environmental protection is crucial, so always check the parameter manual when purchasing. Driving habits also play a key role - maintaining steady speeds can partially compensate for energy consumption.

Was this review help?
9
Share
Expand All
DeCole
04/08/2026, 12:09:15 AM

From a maintenance perspective, the Volkswagen Bora Legend starts with a body weight of 1,280 kg, and the automatic high-end version commonly weighs around 1,350 kg. The heavier weight leads to faster wear on brake pads and suspension components, requiring me to replace parts every quarter. However, the driving experience is stable, offering a strong sense of security at high speeds. It is recommended that owners regularly inspect the chassis to prevent excessive wear caused by the weight. Don’t overlook tire selection—wider tires are more suitable for bearing the load. While the weight isn’t necessarily a bad thing, it’s important not to ignore the impact on fuel consumption and maintenance costs.

Was this review help?
17
Share
Expand All
More Q&A

What is the principle of an aircraft thrust reverser?

Aircraft thrust reversers redirect the expelled engine gases towards the front of the engine, causing the gases to be ejected forward and generating a force opposite to the direction of aircraft flight, known as reverse thrust. The specific working principle is as follows: 1. During normal flight, the clamshell doors are tightly attached to the cascade vanes on both sides of the nozzle, allowing the exhaust gases to flow out of the nozzle to obtain forward thrust. 2. When deceleration is required, the clamshell doors, under the action of hydraulic actuators, block the nozzle passage. The exhaust gases are obstructed by the clamshell doors and are redirected forward at a 45° angle to the axis through the cascade vanes, then ejected diagonally forward through the side exhaust ports, generating a reverse thrust.
113
Share

How to Remove Scratches from Car Windshield?

Here are the methods for removing scratches from car windshields: 1. Clean the glass: Use a clean cloth to thoroughly clean the glass, ensuring there are no debris or impurities, and let the glass dry in a suitable environment. 2. Dampen a microfiber cloth: Under warm running water, take a clean, lint-free cloth (it should be as smooth as possible and not rough or shedding fibers). Wring the cloth tightly until no excess water drips. (Any particles on the cloth, including dust or lint, can rub against the glass and cause uneven wear or additional scratches.) 3. Apply toothpaste to the cloth: Squeeze an appropriate amount of toothpaste onto the cloth based on the size of the scratch, adding more if necessary. (It's best to use white, non-gel toothpaste, especially those containing baking soda as an ingredient, as they are most effective for removing scratches.)
102
Share

What is the battery model for Mazda 6 key?

The battery model for Mazda 6 key is 1620. Below are the specific details about battery models used in car remote keys: 1. CR2016 battery: This type of battery is widely used in car remote keys. It has a voltage of 3V. Generally, car key batteries use a 9V power supply, so all three batteries are replaced at the same time during each replacement. Models such as Honda, Toyota, Volkswagen, Mazda, etc., use this battery. The specifications of CR2016 are a battery diameter of 20mm and a thickness of 1.6mm. 2. CR2025 battery: Its usage rate is much lower than that of CR2016. It is thicker compared to CR2016 but has a relatively higher power storage capacity. The specifications of CR2025 are a battery diameter of 20mm and a thickness of 2.5mm. It is commonly found in audio remote controls. 3. CR2032 battery: It also has a voltage of 3V, but its capacity reaches about 200mAh, making its thickness double that of CR2016.
119
Share

What is the Function of a Car's Rearview Mirror?

Here is a detailed introduction to the functions of a car's rearview mirror: 1. Observing road conditions: While driving, the driver can observe the road conditions on both sides through the rearview mirror, enabling maneuvers such as lane changes and overtaking. 2. Reference points: During operations like parallel parking or reversing into a parking space, reference points can be identified using the rearview mirror. 3. Judging the distance to the vehicle behind: Pay special attention to the central rearview mirror, as it helps determine the distance to the vehicle behind. When the front wheels of the following vehicle are just visible in the central rearview mirror, the distance is approximately 13 meters. When the grille is visible, the distance is about 6 meters, and when the grille is just out of sight, the distance is roughly 4 meters.
112
Share

What is the fuel consumption of the Buick Envision 1.5T?

The WLTC combined fuel consumption of the Buick Envision 1.5T two-wheel-drive luxury model and two-wheel-drive elite model is 7.15L/100KM, while the WLTC combined fuel consumption of the five-seater luxury model is 7.3L/KM. Factors affecting fuel consumption include engine displacement, vehicle weight, road conditions, and operating conditions. Engine displacement: Generally, the smaller the engine displacement, the more fuel-efficient the vehicle will be. If there are two engines with the same displacement, the turbocharged engine is more fuel-efficient than the naturally aspirated engine. Vehicle weight: The weight of the vehicle affects the engine's performance. The heavier the vehicle, the greater the workload on the engine, resulting in higher fuel consumption. Road conditions and operating conditions: Generally, vehicles driving at slower speeds on highways will have relatively lower fuel consumption, while those driving in congested urban areas will have relatively higher fuel consumption. In northern winters, lower temperatures lead to longer cold starts and warm-up times for the vehicle, reducing fuel economy. Additionally, poor road conditions in some areas increase road resistance, further decreasing fuel economy. Fuel-saving tips: Use higher-quality fuel; regularly clean engine carbon deposits; drive smoothly.
102
Share

What Causes the Engine Resonance and Buzzing Noise During Acceleration?

Causes of car body shaking during acceleration include a dirty throttle body and excessive carbon buildup in the fuel injectors and intake manifold. The reasons for body shaking vary under different conditions. Specific scenarios and solutions are as follows: Specific Scenarios: If the car engine shakes when starting, it is not normal, and sometimes there may even be a failure to start. The primary causes are a dirty throttle body and excessive carbon buildup in the fuel injectors and intake manifold. In cold conditions, carbon deposits can absorb some of the fuel, and if the fuel does not fully enter the combustion chamber, it can lead to unstable idling and difficulty starting. When driving at high speeds, the steering wheel may noticeably shake or vibrate at a certain speed, but this is not apparent at low speeds. In this case, it is essential to first rule out abnormal shaking caused by engine issues, as engine faults typically manifest at low speeds as well. Solutions for Car Body Shaking During Acceleration: If the car shakes noticeably during acceleration, visually inspect whether the balancing weights on the wheel rims are missing or if the wheel hubs are visibly deformed. If these areas show no issues, professional diagnostic equipment is required, as subtle deformations in the tie rods, suspension, or wheel hubs are difficult to detect with the naked eye. First, check if the left and right half-shafts are bent. Next, disassemble and inspect the inner walls of the inner CV joints for wear and pitting. In most cases, the issue is caused by a damaged inner CV joint. Modern cars are typically front-engine and front-wheel-drive, with inner CV joints often being telescopic to accommodate changes in the relative position between the transmission drive terminal and the driven wheels during driving. Upon disassembly, it can be observed that the inner walls of the inner CV joints—where they frequently contact the outer race of the needle bearings (i.e., the torque transfer points)—have developed pitting. During rapid acceleration, the engine and transmission assembly undergo slight lateral tilting, altering the position of these torque transfer points. Due to the angle between the half-shaft axis and the inner CV joint axis, these points shift axially during rotation, generating forces that push the car body side to side, resulting in the described sensation. Replacing the damaged inner CV joint or half-shaft can resolve the issue.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.