···
Log in / Register

What is the total weight of the Jetour X70 Plus?

6Answers
DeBrandon
08/31/2025, 01:37:26 AM

The total weight of the Jetour X70 Plus is 1545 kilograms. Below is relevant information about the total weight of the Jetour X70 Plus:1. Impact of vehicle weight on driving experience: Vehicle weight affects the driving experience, with the most noticeable aspects being the car's handling and performance.2. Impact of vehicle weight on fuel consumption: Although vehicle weight influences performance, an increase of several hundred kilograms will affect fuel consumption, not just by adding a few tenths of a liter, but the effect is equivalent to driving under full load conditions. Therefore, whether a car is fuel-efficient depends not only on whether the powertrain is advanced when purchasing the car, but also on whether driving habits are reasonable.

Was this review help?
113
Share
MorganDella
09/12/2025, 10:05:32 PM

Speaking of the weight of the Jetour X70 Plus, as an owner, I thoroughly researched it when choosing a car. This SUV weighs around 1,500 kg, depending on the configuration—my 7-seater version is slightly heavier at about 1,550 kg due to the extra seats and trim. The added weight does increase fuel consumption a bit in city driving, possibly using 1-2L more per 100 km, but it offers great stability on highways, with no body roll in corners, especially when fully loaded with family, enhancing safety. I recommend checking specific data when buying, as different engines and drivetrains affect weight—for example, the 1.5T model might be around 100 kg lighter. Overall, while weight slightly impacts daily driving comfort, it’s a practical factor to consider.

Was this review help?
7
Share
Expand All
DeJohnny
10/26/2025, 10:52:54 PM

I often ponder car specifications. The weight of the Jetour X70Plus generally ranges between 1,450kg to 1,600kg, depending on optional features. The basic 5-seater version is lighter, while higher trims with sunroof or safety packages weigh more, as noted in the manufacturer's manual. Vehicle weight impacts safety—for instance, heavier bodies offer better protection in crash tests. When choosing a car, balance weight and power to avoid sluggish acceleration. Also, don’t neglect regular maintenance like tire pressure and load management, as even weight distribution can improve fuel efficiency by about 5%. I find this data quite practical for everyday drivers—peace of mind matters most on the road.

Was this review help?
5
Share
Expand All
DeGriffin
12/09/2025, 10:08:42 PM

I've driven the Jetour X70Plus for a while, and it weighs around 1500kg. Small details in configuration like the number of seats or engine model can cause slight weight variations - the difference between 5-seater and 7-seater versions can be about 50kg. It feels solid to drive, not particularly fuel-efficient in urban areas, but stable and reliable on highways. Pay attention to how the weight affects braking distance, which is quite crucial.

Was this review help?
9
Share
Expand All
McBrody
01/29/2026, 11:17:52 PM

Took this car for several family trips. The JETOUR X70Plus has a curb weight around 1550kg, with the 7-seater version being slightly heavier. The substantial weight gives me a stable feel at highway speeds and reduces vibrations when going over bumpy roads, making children ride comfortably. Fuel consumption tends to be higher, possibly around 10L per 100km when fully loaded, but the spacious interior compensates with added safety. For daily use, avoid adding too many accessories to maintain lightweight efficiency.

Was this review help?
11
Share
Expand All
VonAdaline
04/24/2026, 05:28:44 PM

I prioritize fuel economy, and the Jetour X70Plus has an average weight of 1500kg. A heavier vehicle will increase fuel consumption, with approximately 1.5L/100km more in urban areas. Opt for lighter configurations whenever possible, such as choosing the base engine model to reduce weight. The manufacturer uses high-strength steel weight reduction technology, but pay attention to load balance during maintenance, like avoiding overloading the luggage area. Overall, weight is slightly linked to environmental impact, and optimizing driving habits can reduce emissions a bit.

Was this review help?
6
Share
Expand All
More Q&A

BMW X6 Engine Model?

BMW X6 Engine Model is: N201997mL. The following is the relevant content introduction: 1. The BMW X6 intake method is turbocharged, and the transmission method is an eight-speed automatic manual transmission. 2. The BMW X6 is equipped with a 3.0-liter twin-turbo diesel engine, a 3.0-liter twin-turbo gasoline engine, a new 4.4-liter V8 gasoline direct injection twin-turbo engine, and a 4.8-liter gasoline engine. BMW defines the X6 as an SAC. Compared to the X5, which is positioned for on-road performance, the X6 has evolved more thoroughly in terms of road performance, integrating the sporty capabilities of a coupe with the versatility of an SUV in terms of exterior design and power handling. The BMW X6 is produced based on BMW's CLAR architecture and features a new family face, with improvements in both configuration and power.
109
Share

Is Land Rover Produced in India?

Land Rover currently has four production bases. First, Solihull in the UK, which is the earliest and most important production base for Land Rover, with the highest output, mainly producing the Range Rover, Range Rover Sport, Land Rover Discovery, and Land Rover Defender. Second, Halewood in the UK, primarily producing models like the Range Rover Evoque, Range Rover Velar, and Discovery Sport. Third, the Pune factory in India, mainly producing models such as the Range Rover, Discovery, and Defender, with very low output, only tens of thousands of vehicles per year. Fourth, the Changshu Economic Development Zone in Jiangsu, China, with an annual designed capacity of 130,000 vehicles, mainly producing models like the Evoque and Discovery Sport. This has also led to the longest car name in China: Chery Jaguar Land Rover Range Rover Evoque and Chery Jaguar Land Rover Discovery Sport.
116
Share

Where is the oil filter located on the Atenza?

The oil filter on the Atenza is located beneath the engine. The oil filter element is the oil filter itself, and its function is to remove impurities, gums, and moisture from the oil, delivering clean oil to all lubrication points. The Atenza measures 4870mm in length, 1840mm in width, and 1450mm in height, with a wheelbase of 2830mm, and features a front-engine, front-wheel-drive layout. In terms of exterior design, the car adopts the all-new KODO design language, with standard LED headlights featuring a scorpion-eye design, enhancing its original beauty, sense of power, and speed with an added touch of elegance. The interior has been completely revamped with the 6.5-generation interior design, featuring innovations in layout, materials, and technological features.
117
Share

What is the minimum ground clearance of the Chevrolet Orlando?

The minimum ground clearance of the Orlando is 180 millimeters. The minimum ground clearance refers to the distance between the lowest point of the vehicle (excluding the wheels) and the supporting surface when the vehicle is fully loaded and stationary, which is used to characterize the vehicle's ability to pass over obstacles such as stones and tree stumps without collision. Here is some related information about the Orlando: 1. The Orlando is a model officially released by Chevrolet. It has a wheelbase of 2796mm. The second and third-row seats of the Orlando support 4/6 and 5/5 proportional folding respectively. When only the 5-seat configuration is used, the trunk capacity can reach 479L, and the trunk can accommodate two 20-inch suitcases. 2. The fuel standard for the Orlando is 92 or above unleaded gasoline, and its emissions comply with the China VI emission standards. The suspension system (front/rear) consists of MacPherson independent suspension/multi-link independent suspension.
105
Share

What is the body construction material of the Baojun 730?

The Baojun 730 features a unibody construction. In terms of its external structure, the new Baojun 730 body utilizes over 55% high-strength steel, with hot-stamped steel plates applied in multiple key areas to enhance overall rigidity while reducing body weight. The design of front and rear energy-absorbing boxes effectively absorbs impact energy. Details about the Baojun 730 are as follows: 1. Exterior design: The large shield-shaped grille appears more three-dimensional, with the front grille connected to the headlight cluster to widen the horizontal visual effect. The bumper adopts a through-type design with single-spoke chrome trim accents, elevating the vehicle's premium feel. Combined with sharp front-end lines and distinctive headlight styling, it exudes a strong sense of modernity. 2. Interior: The new Baojun 730 automatic transmission version features a fresh black-gray color scheme, paired with dark wood-grain imitation panels on the dashboard, ice-blue ambient lighting, and new dual-tone premium seats, creating a layered interior with quality craftsmanship and visual spaciousness.
101
Share

How to Open the Thermostat on a Chevrolet Cruze?

The thermostat on a Chevrolet Cruze opens using the coolant temperature to melt the wax. The thermostat utilizes expansion or contraction to open or close the flow of coolant, automatically adjusting the amount of water entering the radiator based on the coolant temperature. This changes the circulation range of the coolant to regulate the cooling system's heat dissipation capacity. The steps to replace the thermostat are as follows: 1. Turn off the engine and open the front hood. Disconnect the negative terminal of the battery to prevent the electric fan from suddenly operating during the process, which could cause injury. 2. Remove the plastic cover outside the timing belt. The position of the generator may affect the thermostat replacement, so the generator assembly needs to be removed. Place a water-catching tray under the car and prepare to remove the lower hose. 3. After removing the lower hose, the antifreeze will gush out—be careful of burns. At this point, the thermostat itself can be seen. Remove the faulty thermostat. 4. Install the new thermostat. After installation, apply a layer of sealant to the hose connection to prevent leaks.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.