What is the top speed of the Volkswagen Scirocco?

What is the wading depth of the Elysion Hybrid?

The maximum wading depth of the Elysion Hybrid is 135mm. The wading depth of the Elysion Hybrid is determined by the height of the vehicle's chassis, which is the ground clearance listed in the model's parameter configuration. Generally, the greater the ground clearance, the higher the chassis, and the higher the safety factor when passing through waterlogged roads. Therefore, in terms of safe wading depth, the advantages of off-road vehicles and SUVs are obvious. However, for most compact and small cars with low chassis, the position of the vehicle's air intake should be used as a benchmark when passing through waterlogged roads. If the air intake of the Elysion Hybrid is below the water level during wading, water will be sucked into the engine's cylinders. Since water cannot be compressed like air, it can cause severe damage to the engine's mechanical components (such as connecting rods, pistons, crankshafts, etc.). Therefore, the wading depth must not exceed the height of the engine's air intake. The height of the engine's air intake, and thus the maximum wading depth, can also be increased by installing a snorkel. If wading is unavoidable, the following safe and correct procedures should be followed: Before wading, always turn off the auto start-stop function to prevent the engine from automatically restarting if the vehicle stalls in water, which could cause severe damage due to water ingress. Assess the underwater road conditions based on the passage of preceding vehicles and choose an appropriate entry point. Observe the path taken by other vehicles and follow it at a low speed, avoiding sudden acceleration or deceleration. On roads prone to water accumulation, use warning water level markers, trees, or the wheels and doors of other vehicles as reference points to estimate water depth before deciding whether to proceed. Be aware of your vehicle's safe wading depth. If the water depth exceeds half the height of the tires or the engine's air intake, do not proceed and choose an alternative route.

19

0

Share

What Causes the Increasingly Loud Engine Noise in Changan Oushang?

Introduction to the causes of increasingly loud engine noise in Changan Oushang: 1. Aging engine mounts; 2. Aging engine supports; 3. Severe carbon buildup in the engine; 4. Faulty engine cylinders; 5. Poor lubrication; 6. Excessive wear between pistons and cylinder walls; 7. Engine overheating, cooling system failure; 8. Exhaust system blockage, vacuum tube leakage or breakage; 9. Loose belts. Solutions for loud engine noise: 1. Replace engine oil and oil filter, clean the engine; 2. Inspect the working condition of pistons and cylinders; 3. Check the condition of the cooling system; 4. Examine the tightness of the belts; 5. Add engine oil to improve lubrication.

17

0

Share

What is the fuel tank capacity of the Highlander?

The Highlander currently has 9 models on sale. The fuel tank capacity of all 2.5L versions is 65 liters, while that of all 2.0T versions is 72.5 liters. These figures are officially released data. Highlander owners can also check this information on their vehicle's configuration sheet. The 2.5L Highlander models require 92-octane gasoline, with a fuel consumption of 5.3-5.8L per 100 km. A full tank can cover a distance of 1120 to 1226 km. The 2.0T Highlander models require 95-octane gasoline, with a fuel consumption of 8.9L per 100 km. A full tank can cover a distance of 814 km. During daily driving, it is necessary to pay attention to the remaining fuel level in the tank. This is usually observed through the fuel gauge inside the vehicle. If there are no other issues, the fuel level will be accurately reflected on the gauge. The fuel gauge typically has 5 to 6 segments. It is recommended to refuel when there are only 2 segments left to avoid running out of fuel midway. During actual refueling, the amount of fuel may exceed the marked capacity. This is because the fuel tank capacity marked by the manufacturer is measured from the bottom of the tank to the safety level. There is additional space from the safety level to the tank opening, which is designed to allow for fuel expansion when temperatures rise, preventing overflow. If fuel is filled up to the tank opening during refueling, the actual amount of fuel added may exceed the marked capacity.

14

2

Share

Is the Audi Q5L's Dual-Clutch Transmission Really That Fragile?

Audi Q5L's dual-clutch transmission is excellent. Below is relevant information about the Audi Q5L: 1. Introduction: The all-new Audi Q5L was officially launched by FAW-Volkswagen on July 6, 2018, in Anlong, Guizhou. It is the first comprehensively upgraded long-wheelbase premium midsize SUV from Audi, with a total of 6 models available. 2. Exterior Design: The all-new Audi Q5L measures 4765×1893×1659mm in length, width, and height, with a wheelbase of 2908mm. It features a sharp, angular front face with a hexagonal grille, similar to the family Q7.

11

1

Share

What is the displacement of 1485ml?

1485ml is a 1.5-liter displacement. Here are the relevant details about displacement: 1. Introduction 1: The classification of passenger cars is determined by the size of their displacement. Mini cars have a displacement of ≤1.0L, compact cars range from 1.0-1.6L, mid-size cars range from 1.6-2.5L, executive cars range from 2.5-4.0L, and luxury cars have a displacement >4.0L. 2. Introduction 2: Generally, the number at the rear of a car represents its displacement. For BMW cars, identifying the displacement is quite simple. For example, 'BMW325i' refers to a BMW 3 Series with a 2.5-liter displacement, 'BMW530i' is a BMW 5 Series with a 3.0-liter displacement, and Mercedes-Benz's 'S600' indicates an S-Class car with a 6.0-liter displacement plus turbocharging, while 'E240' represents an E-Class car with a 2.0-liter displacement and turbocharging.

6

3

Share

What does TSC mean in cars?

Traction Control System (TSC) is an introduction to the Traction Control System, with its full English name being Traction Control System. Like ABS and ESP, it belongs to the active safety systems of a car. The Traction Control System can prevent the drive wheels from spinning when the vehicle is driving on slippery roads such as snow, allowing the vehicle to start and accelerate smoothly. Especially on snowy or muddy roads, the Traction Control System ensures smooth acceleration performance and prevents the vehicle from skidding or fishtailing due to wheel spin. The control device of the Traction Control System is a computer that monitors the speed of all four wheels and the steering angle of the steering wheel. When the car accelerates, if the computer detects a significant difference in speed between the drive wheels and non-drive wheels, it immediately determines that the driving force is excessive and sends a signal to reduce the fuel supply to the engine, thereby decreasing the driving force and reducing the slip rate of the drive wheels. The computer uses the steering wheel angle sensor to understand the driver's steering intention and then detects the speed difference between the left and right wheels using wheel speed sensors. This helps determine whether the vehicle's steering response matches the driver's intention. If understeer (or excessive oversteer) is detected, the computer immediately determines that the driving force on the drive wheels is too high and reduces it to align with the driver's steering intent.

11

5

Share

What is the top speed of the Volkswagen Scirocco?

What is the wading depth of the Elysion Hybrid?

What Causes the Increasingly Loud Engine Noise in Changan Oushang?

What is the fuel tank capacity of the Highlander?

Is the Audi Q5L's Dual-Clutch Transmission Really That Fragile?

What is the displacement of 1485ml?

What does TSC mean in cars?

What are the dimensions of the Great Wall Fengjun 5?

Where is the windshield washer fluid reservoir located in the Changan CS75 Plus?

Does driving a car continuously for 5 hours have any impact?

What Does the Ding-Dong Sound in a Mercedes-Benz Mean?