···
Log in / Register

What is the tire size of the CX4?

6Answers
VanMorgan
07/28/2025, 09:53:20 AM

The tire size of the CX4 is: tread width of 225 millimeters, tire aspect ratio of 65 millimeters, and outer diameter of 17 inches. The CX4 is a model under the Mazda brand. Taking the Mazda CX4 2021 model as an example, its body dimensions are: length of 4637 millimeters, width of 1855 millimeters, height of 1524 millimeters, wheelbase of 2700 millimeters, and fuel tank capacity of 45 liters. The Mazda CX4 2021 model is equipped with a 2.0L naturally aspirated engine, with a maximum horsepower of 158 and a maximum power of 116 kilowatts, paired with a 6-speed automatic transmission.

Was this review help?
110
Share
DakotaDella
08/11/2025, 02:28:27 PM

I used to drive a Mazda CX-4, and the tire size was usually 225/55 R19. This configuration is quite comfortable on city roads, with good shock absorption and stable grip when cornering. When changing tires, I noticed that it's important to use the original specifications, otherwise fuel consumption may increase or handling may feel awkward. The size numbers can be seen on the sidewall of the tire: 225 is the tire width in millimeters, and 55 is the aspect ratio representing the height percentage. I recommend regularly checking tire pressure and wear to extend tire life, and ensuring winter tires match the size in winter. Overall, the original size is designed to balance performance and safety, ensuring a more secure driving experience.

Was this review help?
17
Share
Expand All
LeElena
09/28/2025, 10:38:50 PM

The factory tire size for the Mazda CX-4 is generally 225/55 R19. This configuration gives the car a cooler appearance with larger wheels and provides strong power feedback when driving at high speeds. I feel the tire width is moderate, not too fuel-consuming, and offers light steering during handling. If you're curious about the size details: 225 represents the tread width in millimeters, 55 is the aspect ratio, and R19 indicates a 19-inch wheel diameter. Enthusiasts looking to modify should be cautious about arbitrarily switching to larger sizes, as it may cause rubbing against the fenders or affect the suspension system. Maintaining the correct tire pressure is crucial to avoid skidding accidents and enhance the overall driving experience.

Was this review help?
18
Share
Expand All
StLilah
11/11/2025, 11:34:16 PM

The CX4's tire size is basically 225/55 R19. When replacing tires, ensure the size matches, otherwise safety could be affected, such as unstable handling or ABS malfunctions. In the size, 225 refers to the tire width in millimeters, and 55 is the aspect ratio percentage. I regularly check tire pressure to prevent blowout risks, and replace with the spare tire of similar specifications when wear exceeds limits for emergency use. Correct tire size ensures smooth driving and reasonable fuel consumption, so don't take it lightly.

Was this review help?
10
Share
Expand All
StMaya
01/02/2026, 01:17:04 AM

When driving my CX4, the tire size is indicated on the door frame label or in the manual, typically 225/55 R19. This size provides a smooth ride without bumps or excessive noise, and tire changes are not troublesome. The 225mm tread width offers sufficient grip for stable driving on wet roads. The 55% aspect ratio ensures good shock absorption, while the 19-inch wheels match the design for an aesthetically pleasing look. When replacing tires, I opt for the original factory specifications to avoid fuel consumption issues. Regular attention to tire pressure monitoring is crucial for safety, ensuring peace of mind and reliability.

Was this review help?
5
Share
Expand All
PeytonRose
03/30/2026, 02:16:37 AM

Tire size is crucial for the CX4. The original standard is 225/55 R19, where 225 is the tread width in millimeters, 55 is the aspect ratio percentage, R indicates radial construction, and 19 is the wheel rim diameter in inches. This overall configuration matches the vehicle's dynamic performance. When replacing tires, it's essential to maintain the same size; otherwise, it may affect suspension calibration or the accuracy of the ABS system. It is recommended to consult the user manual to confirm details. Regular maintenance, including checking for wear and tire pressure, can enhance handling safety, prolong component lifespan, and ensure smooth and risk-free driving.

Was this review help?
10
Share
Expand All
More Q&A

What is the method for replacing valve stem seals on BMW N13?

Replacing valve stem seals typically requires removing the engine cylinder head, supporting the valves, and then performing operations such as replacing the valve stem seals. Method for removing valve stem seals: Remove the camshaft and hydraulic lifters, storing them face down. Please note that during the operation, the lifters are not interchangeable. Use a spark plug wrench to remove the spark plugs, adjust the piston of the corresponding cylinder to top dead center, and screw the pressure hose into the spark plug thread hole. Install the spring compression tool onto the cylinder head using a bolt. Adjust the relevant valve to the correct position, lightly tap the valve spring retainer, and remove the valve lock. Use a tool to pull out the valve stem seal. Function of valve stem seals: Prevent engine oil from entering the exhaust pipe and intake pipe, leading to oil loss; prevent the mixing of gasoline and air; prevent engine oil from entering the combustion chamber; prevent exhaust gas leakage. Valve stem seals mainly consist of lock pieces, spring retainers, seals, inner and outer springs, valves, valve guides, valve seats, etc. They are generally made of materials with good heat resistance and oil resistance, with fluororubber being the primary material used.
117
Share

How to Quickly Remove Frost from Car Windows?

Methods for quickly removing frost from car windows are as follows: Built-in Defroster in the Car: First, turn on the air conditioning button inside the car and switch the air circulation mode to the external circulation mode. After a short while, the frost will disappear. However, this method has a drawback: turning on the air conditioning button in winter will inevitably increase fuel consumption, and switching to external circulation will cause the temperature inside the car to drop suddenly, making it unsuitable for long drives. Opening the Windows: The fastest and most effective emergency method is to roll down the windows. Letting the wind circulate inside and outside the car for a minute or two will naturally remove the frost. This method saves time and does not increase fuel consumption. Turning on the Heater: Simply turn on the heater inside the car and adjust the airflow direction to blow directly onto the windows. The heater will effectively dry the air inside the car, and once the air is dry, frost will not form on the windows. However, this method also has a drawback: when the car is first started in winter, the coolant temperature has not yet reached the normal level, so the air blown out at this time is not warm.
105
Share

Can I directly pull down from 1st gear to 2nd gear in Subject 3 driving test?

It is not advisable to directly pull down from 1st gear to 2nd gear in the Subject 3 driving test. Many operations must follow the correct steps, otherwise the system may fail to detect the action, leading to point deductions. Therefore, it is more appropriate to first shift to neutral before pulling down to 2nd gear when changing from 1st to 2nd gear in Subject 3. Even if directly pulling down from 1st to 2nd gear is allowed in Subject 3, it is still not recommended. This method carries the risk of failing to engage the gear or engaging the wrong gear. Following the proper steps—fully depressing the clutch, shifting to neutral, and then shifting to 2nd gear—ensures higher accuracy and safety. During gear shifting operations in Subject 3, after shifting to neutral, pause for 0.5-1 second before shifting to another gear. There is no specific requirement for the duration of staying in each gear during gear shifting. Upon hearing the gear shift command, complete the shift within 5 seconds. The reason for pausing 0.5-1 second is mainly to prevent the system from failing to detect the shift due to excessive speed, which could result in point deductions for not following the correct procedure.
106
Share

What is the fuel tank capacity of the 2013 Peugeot 508 in liters?

2013 Peugeot 508 has a fuel tank capacity of 70 liters, and it requires 92-octane or higher unleaded gasoline. It is a mid-size car under Dongfeng Peugeot. Among similar models, the Volkswagen Magotan has a fuel tank capacity of 66 liters, and the Buick Regal has a fuel tank capacity of 60 liters. If the owner wants to check the remaining fuel level, they can observe the fuel gauge on the right side of the dashboard, which is marked with E and F. When the pointer is close to E, it indicates low fuel, and when it is near F, it means the fuel level is sufficient. Fuel tank maintenance is as follows: Drain accumulated water and sediment from the fuel tank, and check for any oil leakage at the fuel pipe joints and switches. For fuel tank caps equipped with air valves and vapor valves, ensure that the ventilation holes are clear. The filter screen at the fuel filler inlet should remain intact to prevent impurities from entering the tank during refueling and clogging the fuel lines. The sealing gasket on the fuel filler cap should also be intact to prevent fuel from spilling out during driving.
108
Share

At What Age Can You Obtain a Driver's License?

You can obtain a driver's license if you are between 18 and 70 years old. However, since there are various types of driver's licenses, the age requirements may differ accordingly. A driver's license is a legal document issued by the relevant authorities to individuals who have legally learned to drive motor vehicles, mastered traffic regulations and driving skills, and passed the required examinations, permitting them to operate specific types of motor vehicles. According to Article 11 of the 'Regulations on the Application and Use of Motor Vehicle Driver's Licenses' (Ministry of Public Security Order No. 71), the age requirements for applying for a motor vehicle driver's license are as follows: For small cars, small automatic transmission cars, and light motorcycles, applicants must be between 18 and 70 years old. For low-speed trucks, three-wheeled vehicles, ordinary three-wheeled motorcycles, ordinary two-wheeled motorcycles, or wheeled self-propelled machinery, applicants must be between 18 and 60 years old. For urban buses, medium-sized passenger vehicles, large trucks, trolleybuses, or trams, applicants must be between 21 and 50 years old. For tractor-trailers, applicants must be between 24 and 50 years old. For large passenger vehicles, applicants must be between 26 and 50 years old.
107
Share

Is it necessary to continue practicing driving after failing the subject two test?

It is necessary to continue practicing driving after failing the subject two test. The main reasons for failing are mostly due to unfamiliarity with the driving test items or insufficient proficiency in vehicle operation. Therefore, during the test, any unexpected situation can lead to failure. Many candidates feel nervous during the test, some even to the point of shaking hands and feet. However, overall, most candidates lack confidence in their operation skills. If each driving test item is practiced to a very proficient level, there would be no lack of confidence in operation. Failing the subject two test is often due to unfamiliarity with the test items or insufficient operational proficiency, so practicing after failing is essential. Notes for the subject two test: Dress comfortably and prepare mentally before the test; pay attention to key points when reversing into the garage, avoiding turning left or right; when parking sideways, ensure the rear wheels exceed the edge line of the garage, adjust the distance properly, remember to turn on the signal light and honk. When making a sharp turn, quickly turn the steering wheel after identifying the correct position point; when driving on a curve, make wide turns after entering the curve, maintain a steady speed, and avoid crossing any lines. After the test, drive the car back to the starting position, confirm by signing, and then turn off the engine.
114
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.