···
Log in / Register

What is the tire pressure for Dongfeng Fengguang ix5?

6Answers
Vieira
07/29/2025, 10:33:47 AM

The normal tire pressure for Dongfeng Fengguang ix5 is around 2.3 to 2.5 bar. The tire pressure value can be found on the back of the fuel tank cap and in the vehicle's user manual. Generally, tire pressure values are measured in bar, and the specific tire pressure should be determined based on the vehicle's load. The 2019 Fengguang ix5 has a body length, width, and height of 4685mm, 1865mm, and 1645mm respectively, with a wheelbase of 2790mm. The Fengguang ix5 is positioned as a mid-size SUV, with all models seating 5 passengers, and this vehicle features front-engine, front-wheel drive.

Was this review help?
107
Share
KeiraAnn
08/13/2025, 02:55:36 AM

I remember the standard tire pressure for Dongfeng Fengguang ix5 is 230 kPa, which is the ideal value measured when the tires are cold. Having driven this car for over two years, my experience tells me that low tire pressure increases fuel consumption and may cause uneven tire wear; while overinflation reduces comfort and makes the ride bumpy. Before every drive, I do a quick check by pressing the tires with my hand—if they feel too soft, I top them up immediately. There’s usually a label on the door frame indicating the recommended tire pressure, and 'cold' refers to the state after the car has been parked for at least three hours. Developing a habit of regular checks can save you money, extend tire life, and enhance safety by reducing the risk of blowouts at high speeds. In short, 230 kPa is a solid benchmark.

Was this review help?
6
Share
Expand All
ElleLynn
10/10/2025, 11:09:13 PM

As someone who frequently maintains vehicles, I can confirm that the recommended tire pressure for the Dongfeng Fengguang ix5 should be around 230 kPa. At repair shops, we generally advise users to check the tire pressure with a gauge when the vehicle is cold, as the pressure can increase by 1-2 bar after driving, so avoid measuring it then. Incorrect tire pressure can lead to issues such as increased fuel consumption or tire overheating. If you're unsure, you can visit a 4S shop for a free check—they can also guide you on how to properly inflate your tires. Seasonal changes also affect tire pressure; it can be slightly higher in summer and slightly lower in winter to ensure a smoother ride. Simply investing in a tire pressure gauge will do the trick.

Was this review help?
18
Share
Expand All
SanIsabel
11/23/2025, 11:16:34 PM

When using Dongfeng Fengguang ix5, setting the tire pressure to 230 kPa is most appropriate. This value is clearly stated in the user manual or indicated on the label of the driver's door frame. Measure it when the car is cold before driving; if it's too high, the ride will be bumpy, and if it's too low, the power will decrease. Checking it yourself is also easy: buy a tire pressure gauge and insert it into the tire valve to ensure it meets the standard. Don't be lazy about checking; maintain it once a month for better fuel efficiency, cost savings, and safety.

Was this review help?
4
Share
Expand All
VonIsabelle
01/14/2026, 12:48:31 AM

My husband drives this car, and the tire pressure must be at 230 kPa. He says that when driving normally, lower tire pressure consumes more fuel, possibly increasing fuel costs by about 5%. We have a small tire pressure gauge at home, and we inflate the tires to the standard value in the morning after the car has been parked overnight. This way, the tires last longer, reducing the frequency of tire changes and saving expenses. The kids are more comfortable sitting in the back seat with less bumpiness and higher safety. In short, inflating to 230 kPa when the car is cold is the right thing to do.

Was this review help?
11
Share
Expand All
StGeorge
04/10/2026, 03:53:26 AM

Choosing the Dongfeng Fengguang ix5, the recommended tire pressure is 230 kPa, which is the most eco-friendly and fuel-efficient. Correct tire pressure reduces rolling resistance, allowing you to travel more distance per liter of fuel and reducing exhaust emissions. Through practice, I've found that maintaining proper tire pressure saves me dozens of yuan in fuel costs each month. Investing in an affordable tire pressure gauge and checking it when the car is cold, then topping up as needed, is sufficient. This can double the lifespan of your tires, avoiding frequent replacements and reducing the environmental pollution from discarded tires. Driving also becomes smoother, with reduced noise. Remember, 230 kPa is the key.

Was this review help?
18
Share
Expand All
More Q&A

How to Identify Whether It's a Stock Car?

When purchasing a car, you can determine whether it's a new car or a stock car by checking the vehicle nameplate, tire wear, and manufacturing date. The vehicle nameplate is usually located below the B-pillar on the passenger side, mainly including the manufacturer's brand, model, engine power, total weight, manufacturing number, manufacturing date, and manufacturer name. Check the manufacturing month and year. If the manufacturing date is within three months of the purchase date, it is not a stock car. If it exceeds three months, it can basically be considered a stock car. Generally, new car tires show little to no wear, and the tire hairs on the sidewalls are clearly visible. If you notice the absence of tire hairs, pay attention and then check the tire's manufacturing date. There is a string of numbers on the tire sidewall, with the latter group representing the manufacturing year and the former group representing the week, allowing you to calculate the tire's manufacturing date. Then, compare it with the vehicle's manufacturing date on the nameplate. If the dates are close, it proves it's not a stock car. If there's a significant time difference, you need to be cautious.
113
Share

What does the 'a' symbol in the car mean?

a symbol is the automatic start-stop indicator. There is an automatic start-stop indicator light on the car's dashboard, as well as an automatic start-stop switch. Both the indicator light and the switch have the letter 'a'. Below is relevant information: 1. Meaning of the automatic start-stop indicator light: Many cars today are equipped with an automatic start-stop function, which can reduce exhaust emissions and save fuel. Cars with this feature have an indicator light on the dashboard. If the automatic start-stop system is functioning properly, the indicator light is usually green. If the system is not working correctly, the indicator light is typically yellow or red. 2. Automatic start-stop does not harm the car: Many car owners worry that the automatic start-stop function may damage the car, but there is no need for concern. The automatic start-stop function only activates when the engine coolant reaches normal operating temperature and the battery has sufficient charge. The primary purpose of the automatic start-stop system is not just to save fuel but to reduce exhaust emissions. With environmental concerns becoming increasingly prominent, major automakers are adopting various measures to lower vehicle emissions.
105
Share

Which Side to Place the Temporary Parking Number Plate?

The most suitable place for a temporary parking plate is behind the front windshield on the passenger side. Placing it here does not obstruct the driver's view or create blind spots. More details are as follows: To make the temporary parking plate easily visible, it should be placed in a highly noticeable location, which is undoubtedly the lower part of the car's front windshield. Additionally, it must be positioned without affecting driving visibility. Therefore, the optimal location is behind the front windshield on the passenger side. There are also temporary parking plates on the market designed to be placed outside the front windshield, but these are not recommended. While they may work fine for short-term use, prolonged exposure to sun and rain will significantly reduce the adhesive's effectiveness. A temporary parking plate consists of a stand (base), digits, and a brightness LED light. It is a display card made from various materials, designed to show the vehicle owner's contact information for others' convenience, thereby ensuring safe parking. According to Article 62 of the "Road Traffic Management Regulations," vehicles temporarily parked outside designated parking areas must adhere to the following rules: Park on the right side of the road in the direction of traffic. The driver must not leave the vehicle, and any vehicle obstructing traffic must move away promptly. Before the vehicle comes to a complete stop, doors must not be opened, and passengers must not enter or exit. Doors must not block other vehicles or pedestrians. Parking is prohibited in the following areas: opposite sidewalks with railings (or green barriers), crosswalks, construction zones (except for construction vehicles), and near obstacles. Parking is also prohibited at intersections, railway crossings, sharp curves, narrow roads, bridges, steep slopes, tunnels, and within 50 meters of these locations.
103
Share

Which Subject is Most Likely to Fail in the Driving Test Part 2?

In the driving test Part 2, reversing into a parking space is the most complex. Here are specific techniques for the driving test Part 2: 1. Slow speed: Keeping the speed slow is the fundamental rule for practicing in Part 2. Without stalling, try to keep the speed as slow as possible; the slower, the better, as it allows sufficient time to adjust each operation. 2. Adjust the rearview mirrors: After getting into the car, be sure to adjust the rearview mirrors properly, which is particularly important for reversing into a parking space and parallel parking. 3. Master the three-point alignment method: The three points are the driver's eyes, a reference point on the car, and a reference point on the ground. During the operations in Part 2, it's essential to locate the points accurately and observe carefully to ensure precision. 4. Pay attention to the four corners of the car: The front corner is prone to touching the outer line when reversing into a parking space, while the rear corner is prone to touching the side lines of the parking space; the front corner is prone to crossing the line during curve driving; the front corner is prone to crossing the line during a right-angle turn; the front corner is prone to touching the outer line or the left front corner of the parking space during parallel parking, while the right rear corner is prone to touching the right parking space line. Therefore, pay attention to the four corners and the outer lines.
105
Share

How Many Times Can You Retake the Written Test for Subject 1?

There is no limit to the number of times you can take the Subject 1 test. According to the "Regulations on the Application and Use of Motor Vehicle Driving Licenses," you can take the Subject 1 test twice on the same day. If you fail the first attempt, you can retake it for free the second time. If you fail the second attempt, the Subject 1 test for that day will be terminated, and you can only schedule another test after ten days. Subject 1, also known as the theoretical driving test or driver's theory test, is part of the motor vehicle driving license assessment. The test covers driving theory basics, road safety laws and regulations, local regulations, and related knowledge. The test is conducted on a computer with a time limit of 45 minutes. A passing score for the Subject 1 test is 90 out of 100. The test consists of 100 questions, including single-choice and true/false questions, with each question worth 1 point. If you answer 11 questions incorrectly during the test, the system will automatically submit the test and end the session. Subject 1 test content includes: driving license and motor vehicle management regulations; road traffic conditions and regulations; road traffic safety violations and penalties; road traffic accident handling regulations; basic knowledge of motor vehicles; local regulations; knowledge of braking systems and safety devices for large and medium-sized passenger and freight vehicles; specialized knowledge for wheeled self-propelled machinery, trams, and trolleybuses. Subject 1 test precautions: Candidates should dress appropriately (no slippers), and electronic devices and bags are not allowed in the examination room. Bring your ID card and queue to enter the waiting hall. Observe the instructions and procedures on the large screen, and store personal belongings in a locker before entering the examination room. Upon entering, verify your identity at the assigned seat and begin the test. Ensure the camera is aligned with you and follow test discipline. If you fail the first attempt, you can retake it the same day. If you fail again, you must pay to reschedule. After the test, queue to collect your score report and sign it. Failure to sign will render the result invalid. There is no limit to the number of times you can schedule the Subject 1 test. Each test allows one retake if you fail. If you do not take the retake or fail the retake, the test session ends, and you must reschedule. In contrast, Subject 2 and Subject 3 have only five test attempts. If you fail the Subject 3 safe driving knowledge test, your passing score for the road driving skills test remains valid. The driving test consists of three subjects: Subject 1, Subject 2, and Subject 3. Subject 1 refers to the road traffic safety laws, regulations, and related knowledge test; Subject 2 refers to the field driving skills test; Subject 3 is divided into two parts: road driving skills and safe driving knowledge. The safe driving knowledge test is conducted after Subject 3, so it is commonly referred to as Subject 4. However, the official term (as per the Ministry of Public Security's Order No. 123) does not include "Subject 4."
120
Share

What causes the third-generation EA888 engine to burn oil?

It is caused by issues with the engine's exhaust gas valve. Below are the relevant details: 1. Exhaust Gas Valve: After engine oil passes through the exhaust gas valve, a portion of the oil flows into the combustion chamber. Inside the combustion chamber, the oil is burned, and the residual impurities accelerate the wear of the engine piston rings, causing the oil rings to lose tension and leading to severe oil burning. 2. Function: The oil used in motor vehicles, also known as engine lubricating oil, serves to lubricate and reduce friction in the engine, as well as assist in cooling and temperature reduction. The oil in a car is often referred to as the 'blood' of the vehicle. Engine oil consists of two main components: additives and base oil.
118
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.