···
Log in / Register

What is the tire model of the Southeast DX3?

3 Answers
LeAaliyah
09/04/25 8:37am
The tire models for the Southeast DX3 are 215/55R18 18-inch tires and 215/60R17 17-inch tires. The high-end version comes with 18-inch tires, while the mid and low-end versions feature 17-inch tires. The Southeast DX3 is a compact SUV with dimensions of 4354mm in length, 1840mm in width, and 1670mm in height, and a wheelbase of 2610mm. In terms of exterior design, the car adopts a front face design characteristic of Southeast Motors, integrating the 'Spread Wings' grille with the standard dual L-shaped eagle-eye lens headlights, giving the front a stylish and dynamic appearance. The body features a diving waistline and a floating roof design, where the roof seamlessly blends with the C-pillar, combining the speed of a coupe with the stability of an SUV, resulting in a sleek and athletic overall body.
Was this review help?
14
1
Share
LunaLee
09/17/25 2:37am
I've been driving the SouEast DX3 for several years, and its tire size is usually 215/60 R17. This size provides a good balance on both city roads and highways, offering stable and comfortable driving. Tires are crucial for driving safety, so I regularly check the tire pressure, keeping it between 30-35 psi to avoid the risk of blowouts. In rainy or snowy weather, I recommend using tires with deeper treads to improve grip and prevent skidding. Rotate the tires every 8,000 kilometers or so to extend their lifespan. When replacing tires, brands like Michelin or Bridgestone offer good durability and value for money. Proper tire maintenance not only saves fuel but also ensures a safer drive, especially during long trips.
Was this review help?
3
0
Share
Expand All
SanLorenzo
10/31/25 3:08am
As someone who frequently repairs cars, the tire specification for the Soueast DX3 is 215/60 R17. During installation, pay attention to rim compatibility to prevent air leakage issues. Common faults include punctures from nails, which require timely repairs. I advise owners to check tire tread depth every six months, ensuring a minimum of 3mm to improve wet braking performance. It is recommended to use original model tires to maintain handling and fuel efficiency. During maintenance, conduct a comprehensive inspection, including air pressure checks and wheel alignment, to prevent unexpected failures. Safe driving is fundamental, and regular maintenance is key.
Was this review help?
20
5
Share
Expand All
More Forum Discussions

What brand does the Lynk & Co 03 belong to?

Lynk & Co 03 is a model under the Lynk & Co brand. Here is some information about the Lynk & Co 03: 1. Lynk & Co is a premium brand jointly established by Geely Holding Group, Geely Auto Group, and Volvo Cars in the new era. Currently, Lynk & Co's production models include the Lynk & Co 01, Lynk & Co 02, and Lynk & Co 03. 2. In terms of exterior design, the new car maintains the overall styling consistent with Lynk & Co's family design language. The frog-like split-type front headlight cluster remains original, with avant-garde, bold, and personalized elements being key innovative concepts of this vehicle.
16
3
Share

How to Operate an Automatic Transmission on Uphill and Downhill Slopes

Automatic transmission downhill operation methods are as follows: 1. When going downhill, shift the gear to L position and use the foot brake in coordination. Remember not to engage N gear. 2. Do not coast in neutral gear. The automatic transmission requires lubrication, and when the gear is placed in N during driving, the oil pump cannot supply oil normally for lubrication. 3. Under normal downhill conditions, using D gear with intermittent braking is sufficient. For steep slopes, use L gear to control the speed or manually shift gears to regulate speed. 4. Pay attention to road conditions while driving. In case of emergencies, apply the brakes. If brake failure occurs, repeatedly pump the brakes several times - this may restore braking function. Firmly hold the steering wheel to prevent the car from veering off course and engage the parking brake.
2
3
Share

Where is the charger port on the BMW X3 located?

The charger port on the BMW X3 is located below the air conditioning vents. BMW X3 charger port: The charger port on the BMW X3 is situated below the air conditioning vents. This charging port serves as an interface to provide power to external devices, with an output voltage of 12V, allowing you to charge devices such as smartphones and tablets. Charger port functionality: The 12V power outlet in the car can be used to connect various electrical devices like car phones, portable DVD players, and mobile chargers, making it quite convenient. With so many small electronic devices that can be used in the car, sometimes a single port may not be sufficient. In such cases, you can use a power adapter that plugs into the single 12V power outlet, providing three additional power output ports. Some adapters even allow voltage adjustment from 1–12V, offering great convenience.
9
5
Share

What are the pros and cons of engine auto start-stop technology?

Engine auto start-stop technology has the following advantages and disadvantages: 1. Benefits: After the engine shuts off, the power supply can replace the pulley to provide operating power for the engine cooling fan and in-car air conditioning, achieving the goal of fuel saving and emission reduction. 2. Drawbacks: When temporarily stopping on a slope, the start-stop system starts relatively slowly, making it easy for the vehicle to slide when releasing the brake, leading to potential dangers. 3. For most vehicles equipped with a start-stop system, when the engine shuts off, the air conditioning only blows air without cooling, significantly affecting passenger comfort. 4. If the vehicle stops during water wading and the engine shuts off, the exhaust pressure suddenly decreases. Water can easily flow back from the exhaust pipe into the engine, causing the engine to fail to start.
9
1
Share

What are the differences of the Tank 300 Urban Edition?

Tank 300 Urban Edition differences comparison is as follows: Exterior differences: Urban Edition features chrome-plated front grille. Off-Road Edition has blackened treatment. Urban Edition's wheel arches, rearview mirrors, and door handles are body-colored. Off-Road Edition has blackened treatment. Urban Edition comes with electric side steps. Off-Road Edition has fixed steps. Tire differences: Urban Edition is equipped with 17 or 18-inch HT tires, with 18-inch being Michelin Primacy SUV tires, and optional 17-inch AT tires. Off-Road Edition comes standard with 17-inch HT tires and optional 17-inch AT tires. System differences: Urban Edition features an intelligent dual-speed 4WD system with low-range gearing, with top trim offering optional electronically-controlled rear differential lock. Off-Road Edition comes with electronically-controlled part-time 4WD with central locking function, standard electronically-controlled rear differential lock, and optional electronically-controlled front differential lock for base trim.
6
0
Share

What are the key points to pay attention to during the Subject 2 driving test?

Here are the precautions to take during the Subject 2 driving test: 1. First, make sure to complete all preparations before the test. 2. Before getting into the car to start the test, report to the examiner. 3. Throughout the entire process, you must not stop (except at designated points), roll back, shift gears incorrectly, stall the engine, or cross the lines. Below are specific precautions for each item in the Subject 2 test: 1. Reverse parking precautions: (1) When driving to the starting position, ensure the distance between the car body and the line is correct; the car body should cover the white line at the front right of the parking space but not exceed it. (2) While reversing, accurately align with the reference points, turn the steering wheel fully, and use the rearview mirror to align with the parking space points. (3) Once the car is in the parking space, ensure it is straight and the steering wheel is centered; avoid unnecessary left or right turns. (4) Do not reverse too far into the space; stop immediately upon entering. (5) When exiting to the left, pay attention to the distance between the left side of the car and the parking space line, adjusting the steering wheel as needed. (6) Ensure the car exits completely to the designated position when leaving to the left. (7) Throughout the entire process, you must not stop, roll back, shift gears incorrectly, stall the engine, or cross the lines. 2. Parallel parking precautions: (1) When driving to the test position, ensure the car body does not exceed the white line. (2) Adjust the distance between the car body and the edge of the parking space appropriately; do not get too close to the space, ensuring the rear wheels at least cross the edge line of the parking space. (3) When turning the steering wheel, accurately align with the reference lines. (4) After entering the parking space, turn on the left turn signal and honk the horn; when exiting, ensure the car does not touch the corner of the parking space. (5) Throughout the entire process, you must not stop, roll back, shift gears incorrectly, stall the engine, or cross the lines. 3. Right-angle turn precautions: (1) While driving forward, adjust the distance between the car body and the right edge line. (2) When reaching the corner, turn the steering wheel fully according to the speed. (3) After turning fully, you may lean out slightly to check if the left rear wheel can touch the corner; if it can, slightly adjust the steering wheel back. (4) Throughout the entire process, you must not stop, roll back, shift gears incorrectly, stall the engine, or cross the lines. 4. Hill start and stop precautions: (1) When driving uphill, turn on the right turn signal and maintain a slow speed; generally, the right wheel should be about 30 cm from the edge line. Control this distance carefully. (2) When reaching the designated position, slow down further to accurately align with the reference point. (3) Before starting, turn on the left turn signal and honk the horn, find the half-clutch point, and generally avoid pressing the accelerator. (4) Throughout the entire process, you must not stop (except at designated points), roll back, shift gears incorrectly, stall the engine, or cross the lines. 5. Curve driving precautions: (1) After entering the curve, make wide turns. (2) Maintain a slow and steady speed, accurately align with each curve point, and turn and straighten the steering wheel quickly. (3) Throughout the entire process, you must not stop, roll back, shift gears incorrectly, stall the engine, or cross the lines.
3
0
Share
Cookie
Cookie Settings
© 2025 Servanan International Pte. Ltd.